Publications

• Rapport

Adéquations des recommandations d’adaptation du siège avec les spécifications en vigueur et validation de la faisabilité par ZSFR/Air France

François Gabrielli, Philippe Pudlo, Jean Marc Obadia

[Rapport de recherche] LAMIH, Valenciennes. 2015. ⟨hal-03420736⟩

• Article dans une revue

A Method to Compute Efficient 3d Helicopters Flight Trajectories Based on a Motion Polymorph-Primitives Algorithm

Konstanca Nikolajevic, Nicolas Belanger, David Duvivier, Rabie Ben Atitallah, Abdelhakim Artiba

Finding the optimal 3D path of an aerial vehicle under flight mechanics constraints is a major challenge, especially when the algorithm has to produce real time results in flight. Kinematics models and Pythagorian Hodograph curves have been widely used in mobile robotics to solve this problematic.…

International Journal of Computer, Electrical, Automation, Control and Information Engineering, 2015, 9 (8), pp.1931-1939. ⟨10.5281/zenodo.1338542⟩. ⟨hal-03402081⟩

• Article dans une revue

Identification of lubrication regime on textured surfaces by multi-scale decomposition

Cédric Hubert, Krzysztof Kubiak, Maxence Bigerelle, André Dubois, Laurent Dubar

This paper focuses on the analysis of surfaces resulting from thickness reduction of aluminium strips, provided with lubricant reservoirs, and deformed with different lubricant viscosities and drawing velocities, by a specific experimental drawing process. During reduction, the lubricant is…

Tribology International, 2015, 82, Part B, pp.375-386. ⟨10.1016/j.triboint.2014.04.035⟩. ⟨hal-03451016⟩

• Chapitre d'ouvrage

Void Fraction Influence Over Aqueous Foam Flow: Wall Shear Stress and Core Shear Evolution

Rogelio Chovet, Fethi Aloui

In this study, the two main transport characterization problems of the foam flow are studied: foam flow stability, through the evolution of the velocity at the core of the foam, and rheology, with the study of the wall shear stress over the lateral walls, for different void fractions. The same…

Progress in Clean Energy Volume 1 Analysis and Modeling, Springer International Publishing, pp.909-931, 2015, ⟨10.1007/978-3-319-16709-1_66⟩. ⟨hal-03579829⟩

• Article dans une revue

Design of a device to induce swirling flow in pipes: A rational approach

François Beaubert, Halldor Pálsson, Sylvain Lalot, Isabelle Choquet, Hadrien Bauduin

In this study, a rational approach is proposed to design a device for inducing swirling flow in heat exchanger pipes, for improved efficiency in the laminar regime. First, 2D computational fluid dynamics results lead to select, among four profiles, the blade profile with the most favorable lift to…

Comptes Rendus Mécanique, 2015, 343 (1), pp.1-12. ⟨10.1016/j.crme.2014.09.004⟩. ⟨hal-03452026⟩

• Article dans une revue

Effects of robotic gait rehabilitation on biomechanical parameters in the chronic hemiplegic patients, Effets de la rééducation robotisée à la marche sur les paramètres biomécaniques de la marche chez des patients hémiplégiques chroniques

Laura Wallard, Gilles Dietrich, Yves Kerlirzin, Jonathan Bredin

Hemiplegia is a more or less complete loss of hemibody voluntary motricity following a brain injury, usually resulting in alterations of the locomotor system with persistent disorders of movement and posture. We were interested in studying the gait pattern called "stiff knee gait" with…, L’hémiplégie est une perte plus ou moins complète de la motricité volontaire d’un hémicorps suite à une lésion cérébrale, entraînant généralement des altérations de l’appareil locomoteur avec des troubles persistants du mouvement et de la posture. Nous nous sommes intéressés, pour cette étude, au…

Neurophysiologie Clinique = Clinical Neurophysiology, 2015, 45 (3), pp.215-219. ⟨10.1016/j.neucli.2015.03.002⟩. ⟨hal-03465478⟩

• Communication dans un congrès

Human Reliability Assessment under Uncertainty – Towards a Formal Method

Subeer Rangra, Mohamed Sallak, Walter Schön, Frédéric Vanderhaegen

Humans are and will remain one of the critical constituents of a technological system. The study of human factors is a broad domain with equally varying applications. Furthermore, with the advent of new technologies in safety-critical systems there is always a need to ensure system safety and…

6th International Conference on Applied Human Factors and Ergonomics and the Affiliated Conferences (AHFE 2015), Jul 2015, Las Vegas, United States. pp.3230-3237, ⟨10.1016/j.promfg.2015.07.874⟩. ⟨hal-01266950⟩

• Article dans une revue

Development of CBCT-based prostate setup correction strategies and impact of rectal distension

Christine Boydev, Abdelmalik Taleb-Ahmed, Foued Derraz, Laurent Peyrodie, Jean-Philippe Thiran, David Pasquier

Background: Cone-beam computed tomography (CBCT) image-guided radiotherapy (IGRT) systems are widely used tools to verify and correct the target position before each fraction, allowing to maximize treatment accuracy and precision. In this study, we evaluate automatic three-dimensional intensity-…

Radiation Oncology, 2015, 10 (1), pp.83. ⟨10.1186/s13014-015-0386-8⟩. ⟨hal-01683881⟩

• Article dans une revue

Axisymmetric modeling of the thermal cooling, including radiation, of a circular glass disk

Norbert Siedow, Dominique Lochegnies, Fabien Béchet, Philippe Moreau, Hiroshi Wakatsuki, Nobuhiro Inoue

Achieving correct tempering in thin glass is very important to prevent undesired stress and breakage. Computer simulation can elucidate and control the tempering process. For semitransparent materials like glass, heat transfer by thermal radiation is substantial; for thick glass, it may dominate…

International Journal of Heat and Mass Transfer, 2015, 89, pp.414-424. ⟨10.1016/j.ijheatmasstransfer.2015.04.091⟩. ⟨hal-03276352⟩

• Communication dans un congrès

Damage characterization for particles filled semi-crystalline polymer

Franck Lauro, Romain Balieu, Bruno Bennani, Grégory Haugou, Benjamin Bourel, Fahmi Chaari, Tsukatada Matsumoto, Ernesto Mottola

Damage evolution and characterization in semi-crystalline polymer filled with particles under various loadings is still a challenge. A specific damage characterization method using Digital Image Correlation is proposed for a wide range of strain rates considering tensile tests with hydraulic jacks…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01009, ⟨10.1051/epjconf/20159401009⟩. ⟨hal-03433114⟩