Publications

• Rapport

DataRush. Rapport final de la tâche 3 "Optimisation de tournées de véhicules avec collecte et livraison basée sur la prédiction

Amine Alalou, Said Hanafi, Mahdi Khemakhem

DataRush. Rapport final de la tâche 3 "Optimisation de tournées de véhicules avec collecte et livraison basée sur la prédiction". [Rapport de recherche] LAMIH, Université Polytechnique des Hauts-de-France. 2015. ⟨hal-03388880⟩

• Communication dans un congrès

Dynamic behavior and failure of the base and heat affected materials of a HSS fillet welded joint

Julien Carrier, Eric Markiewicz, Grégory Haugou, David Lebaillif, Nicolas Leconte, Hakim Naceur

Welded joints, due to their manufacturing process, are commonly weakened areas. This study analyses the dynamic behavior of the Base Metal (BM) and the Heat-Affected Zone (HAZ) materials of a HSS (High Strength Steel) fillet welded joint. First, a specific approach is developed to generate the HAZ…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.05011, ⟨10.1051/epjconf/20159405011⟩. ⟨hal-03433914⟩

• Article dans une revue

An Analysis of Driver's Avoiding Maneuver in a Highly Emergency Situation

Makoto Itoh, Marie-Pierre Pacaux-Lemoine, Frédéric Robache, Hervé Morvan

This paper discusses driver’s emergency avoiding behavior while he or she is driving a car in a rural area.Based on behavioral data obtained from an experiment conducted in France with a high-fidelity driving simulator, theauthors analyzed the driver behavior just before the collision. The results…

SICE Journal of Control, Measurement, and System Integration, 2015, 8 (1), pp.27-33. ⟨10.9746/jcmsi.8.27⟩. ⟨hal-03404355⟩

• Article dans une revue

Observer design for Takagi-Sugeno descriptor models: an LMI approach

Víctor Estrada Manzo, Thierry-Marie Guerra, Zsofia Lendek

This paper considers observer design for nonlinear descriptor systems. We propose approaches based on Takagi-Sugeno (TS) models. An extended estimation vector is used in order to keep the descriptor structure of the observer. The design conditions for this new type of observers are expressed as LMI…

Automatica, 2015, 52, pp.154-159. ⟨10.1016/j.automatica.2014.11.008⟩. ⟨hal-03428793⟩

• Chapitre d'ouvrage

Void Fraction Influence Over Aqueous Foam Flow: Wall Shear Stress and Core Shear Evolution

Rogelio Chovet, Fethi Aloui

In this study, the two main transport characterization problems of the foam flow are studied: foam flow stability, through the evolution of the velocity at the core of the foam, and rheology, with the study of the wall shear stress over the lateral walls, for different void fractions. The same…

Progress in Clean Energy Volume 1 Analysis and Modeling, Springer International Publishing, pp.909-931, 2015, ⟨10.1007/978-3-319-16709-1_66⟩. ⟨hal-03579829⟩

• Article dans une revue

Robust Observer Design of Tire Forces in Heavy Duty Vehicles

Hocine Imine, Omar Khemoudj, Mohamed Djemai, Krishna Busawon

This paper presents a robust observer design methodology to estimate tire forces in heavy-duty vehicles. The proposed methodology uses low-cost sensors and observer-based numerical differentiators. In addition to the already available sensors, low-cost sensors from the CAN bus are employed to get…

IEEE Transactions on Intelligent Transportation Systems, 2015, 16 (6), pp.3304-3312. ⟨10.1109/TITS.2015.2443180⟩. ⟨hal-01215693⟩

• Communication dans un congrès

Damage characterization for particles filled semi-crystalline polymer

Franck Lauro, Romain Balieu, Bruno Bennani, Grégory Haugou, Benjamin Bourel, Fahmi Chaari, Tsukatada Matsumoto, Ernesto Mottola

Damage evolution and characterization in semi-crystalline polymer filled with particles under various loadings is still a challenge. A specific damage characterization method using Digital Image Correlation is proposed for a wide range of strain rates considering tensile tests with hydraulic jacks…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01009, ⟨10.1051/epjconf/20159401009⟩. ⟨hal-03433114⟩

• Article dans une revue

Revenue management for rail container transportation

Ioana Bilegan, Luce Brotcorne, Dominique Feillet, Yezekael Hayel

In this paper, we consider the revenue maximization problem of a rail freight transportation company or an intermodal marketing company selling freight transportation services. We propose a revenue management (RM) policy to dynamically accept transportation requests or reject them in favor of some…

EURO Journal on Transportation and Logistics, 2015, 4 (2), pp.261-283. ⟨10.1007/s13676-014-0051-7⟩. ⟨emse-01092226⟩

• Article dans une revue

Development of CBCT-based prostate setup correction strategies and impact of rectal distension

Christine Boydev, Abdelmalik Taleb-Ahmed, Foued Derraz, Laurent Peyrodie, Jean-Philippe Thiran, David Pasquier

Background: Cone-beam computed tomography (CBCT) image-guided radiotherapy (IGRT) systems are widely used tools to verify and correct the target position before each fraction, allowing to maximize treatment accuracy and precision. In this study, we evaluate automatic three-dimensional intensity-…

Radiation Oncology, 2015, 10 (1), pp.83. ⟨10.1186/s13014-015-0386-8⟩. ⟨hal-01683881⟩

• Communication dans un congrès

Human Reliability Assessment under Uncertainty – Towards a Formal Method

Subeer Rangra, Mohamed Sallak, Walter Schön, Frédéric Vanderhaegen

Humans are and will remain one of the critical constituents of a technological system. The study of human factors is a broad domain with equally varying applications. Furthermore, with the advent of new technologies in safety-critical systems there is always a need to ensure system safety and…

6th International Conference on Applied Human Factors and Ergonomics and the Affiliated Conferences (AHFE 2015), Jul 2015, Las Vegas, United States. pp.3230-3237, ⟨10.1016/j.promfg.2015.07.874⟩. ⟨hal-01266950⟩