Publications

• Chapitre d'ouvrage

Human-Machine Cooperation for the Distributed Control of a Hybrid Control Architecture

Yenny Paredes-Astudillo, José-Fernando Jimenez Gordillo, Gabriel Zambrano Rey, Damien Trentesaux

The fourth industrial revolution features smart and connected technologies that improve significantly business operations. Certainly, there is an increase of efficiency and productivity of smart factories due to the implementation of these innovative technologies. Nevertheless, this new industrial…

Borangiu; Trentesaux; Leitão; Giret; Botti. Service Oriented, Holonic and Multi-agent Manufacturing Systems for Industry of the Future, 853, Springer International Publishing, pp.98-110, 2020, Studies in Computational Intelligence, 978-3-030-27477-1. ⟨10.1007/978-3-030-27477-1_8⟩. ⟨hal-03406721⟩

• Communication dans un congrès

Ethical Behaviour Aspects of Autonomous Intelligent Cyber-Physical Systems

Damien Trentesaux, Stamatis Karnouskos

Industry 4.0 fosters the development of more autonomousand intelligent cyber-physical systems that interact with humans in openenvironments. While the technical aspects are heavily researched, thesame does not hold for the accompanying ethical issues that are relevantfor the design, development,…

SOHOMA 2020: Service Oriented, Holonic and Multi-Agent Manufacturing Systems for Industry of the Future, Oct 2020, Paris, France. pp.55-71, ⟨10.1007/978-3-030-27477-1_5⟩. ⟨hal-03406129⟩

• Article dans une revue

Strength and failure of an aluminum/PA66 self-piercing riveted assembly at low and moderate loading rates: Experiments and modeling

Nicolas Leconte, Benjamin Bourel, Franck Lauro, Claudiu Badulescu, Eric Markiewicz

The self piercing riveting (SPR) process is increasingly used in the automotive industry due to its ability to connect multi-materials for weight reduction considerations. The strength and failure of such multi-material assemblies need to be characterized and modelled for full-scale structural…

International Journal of Impact Engineering, 2020, 142, pp.103587-1 - 103587-23. ⟨10.1016/j.ijimpeng.2020.103587⟩. ⟨hal-02638901⟩

• Communication dans un congrès

A Discrete-Time Matching Filtering Differentiator

Jose Eduardo Carvajal Rubio, Juan Diego Sanchez-Torres, Michael Defoort, Alexander Loukianov, Mohamed Djemai

This paper presents a time discretization of therobust exact filtering differentiator, a sliding mode differentiatorcoupled to filter, which provides a suitable approximation to thederivatives of some noisy signals. This proposal takes advantageof the homogeneity of the differentiator, allowing the…

CCE'20, Aug 2020, Mexico City, Mexico. ⟨hal-03405131⟩

• Article dans une revue

Behavior of the square-back Ahmed body global modes at low ground clearance

Baptiste Plumejeau, Laurent Keirsbulck, Sebastien Delprat, Marc Lippert, Wafik Abassi

The present work aims to study the evolution of the wake-flow dynamic, including the shear-layers interactions phenomena and the global modes behavior of a square-back Ahmed body with a width to height aspect ratio, w/h, of 1.346. Various ground-clearance configurations around the critical case…

Physical Review Fluids, 2020, 5 (8), ⟨10.1103/PhysRevFluids.5.084701⟩. ⟨hal-03342285⟩

• Article dans une revue

Fracture rate dependency of an adhesive under dynamic loading

Noëlig Dagorn, Gérald Portemont, Vincent Joudon, Benjamin Bourel, Franck Lauro

Adhesive joints are widely developed in aeronautic and automotive design applications. When subjected to impact loading, the rate sensitivity of adhesively bonded joints becomes a subject of interest. In this study, the Mode I fracture behavior of an aeronautic adhesive is characterized. Double…

Engineering Fracture Mechanics, 2020, 235, pp.107082. ⟨10.1016/j.engfracmech.2020.107082⟩. ⟨hal-03186844⟩

• Communication dans un congrès

Modeling and experimentation of microcontact tool/chip during the micromachining process

Chokri Boubakri, Laurent Dubar, Michel Watremez, Damien Méresse, Cédric Hubert, M. Nouari, C. Wolff, A. Moufki

13th International Conference on the Technology of Plasticity (ICTP 2020), Jul 2020, Ohio, United States. ⟨hal-03432902⟩

• Communication dans un congrès

Return to manual control after monitoring automated systems: Effects of different levels of reliability

Eugénie Avril, Jordan Navarro, Liên Wioland, Julien Cegarra

International Conference on Applied Human Factors and Ergonomics AHFE, Jul 2020, San Diego, United States. ⟨hal-05040987⟩

• Communication dans un congrès

Experimental Investigations of the Surface Groove Effect in Taylor-Couette-Poiseuille Flow

Lamia Gaied, Fethi Aloui, Marc Lippert, Emna Berrich

In this paper, we investigate the effects of an imposed axial flow on hydrodynamic instabilities’ Couette-Taylor flow in the case where the wall of the inner cylinder of the system is grouved. Without imposed axial flow, the basic flow of a fluid between two coaxial cylinders known by Couette flow…

ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2020, Virtual Event, France. ⟨10.1115/FEDSM2020-20326⟩. ⟨hal-03691451⟩

• Communication dans un congrès

Experimental and Numerical Investigations of Unsteady Flows Downstream Confined Rectangular Obstacles

Fethi Aloui, Amal Elawady

In this work, we present an experimental and numerical study in a horizontal duct with a rectangular cross-section (300 × 30mm2). In the middle of this cross-section, a rectangular obstacle (20 × 10mm2) then a squared obstacle (10 × 10mm2) were placed in order to study experimentally and…

ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2020, Virtual Event, France. ⟨10.1115/FEDSM2020-20322⟩. ⟨hal-03677888⟩