Publications

• Article dans une revue

Experimental study of the cooling performance of phase change material with discrete heat sources – Continuous and intermittent regimes

Salma Gharbi, Souad Harmand, Sadok Ben Jabrallah

This paper presents an experimental investigation of phase change material (PCM, Plastic paraffin) behavior in a rectangular enclosure with three discrete heat sources flush-mounted on the right vertical wall. The remaining walls of the cavity are adiabatic. Maximizing the critical time (time…

Applied Thermal Engineering, 2017, 111, pp.103-111. ⟨10.1016/j.applthermaleng.2016.06.109⟩. ⟨hal-03456388⟩

• Article dans une revue

Quantitative analysis of galling in cold forging of a commercial Al-Mg-Si alloy

Kevin Le Mercier, Mirentxu Dubar, Katia Mocellin, André Dubois, Laurent Dubar

Multiple upsetting-sliding tests are performed at sliding velocities in the range of 20-200 mm.s-1 and at different plastic deformations to reproduce the local contact conditions experienced at the tool/workpiece interface during cold forging of a 6082 aluminium alloy. An original approach, able to…

Procedia Engineering, 2017, International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom, 207, pp.2298-2303. ⟨10.1016/j.proeng.2017.10.998⟩. ⟨hal-03456447⟩

• Article dans une revue

An Improved Downlink MC-CDMA System for Efficient Image Transmission

Mohammed Sofiane Bendelhoum, Ali Djebbari, Ismail Boukli Hacene, Abdelmalik Taleb-Ahmed

Image compression is an essential stage of the data archiving and transmitting process, as it reduces the number of bits and the time required to complete the transmission. In this article, a study of image transmission over the Multi-Carrier Code Division Multiple Access (MC-CDMA) downlink system…

Journal of Telecommunications and Information Technology, 2017, 4, pp.5-16. ⟨10.26636/jtit.2017.110917⟩. ⟨hal-03666580⟩

• Communication dans un congrès

Experimental characterisation of multi-sheet, multi-material spot-welded assemblies under pure and combined I/II loading conditions

Rim Chtourou, Fahmi Chaari, Grégory Haugou, Nicolas Leconte, Eric Markiewicz, Bassem Zouari

Resistance spot welding (RSW) of multiple sheets (more than two) and combining multiple materials (i.e. different steel grades) are increasingly employed with the growing demand of safety and lightweight vehicle structures. Despite that, the mechanical strength and rupture of such a new generation…, Une nouvelle génération d’assemblages trois tôles multi-matériaux soudés par point a été récemment introduite dans la conception de la caisse en blanc des véhicules automobiles, pour améliorer la sécurité et contribuer également à l’allégement structural. Malgré l’utilisation croissante de ces…

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03465311⟩

• Communication dans un congrès

Effects of 12 months of resistance training versus endurance training on bone mineral density in young overweight men

Rawad El Hage, C. El-Khouri, J. Matta, F. Frenn, Ghassan Maalouf, M. Rizkallah, Antonio Pinti, Eric Watelain, Hechmi Toumi, E. Lespesailles

WCO-IOF-ESCEO, 2017, Florence, Italy. ⟨hal-03462120⟩

• Article dans une revue

Reducing the Toxicity Risk in Antibiotic Prescriptions by Combining Ontologies with a Multiple Criteria Decision Model

Souhir Ben Souissi, Mourad Abed, Lahcen Elhiki, Philippe Fortemps, Marc Pirlot

We consider the risk of adverse drug events caused by antibiotic prescriptions. Antibiotics are the second most common cause of drug related adverse events and one of the most common classes of drugs associated with medical malpractice claims. To cope with this serious issue, physicians rely on…

AMIA .. Annual Symposium proceedings [electronic resource] / AMIA Symposium. AMIA Symposium., 2017, pp.1625-1634. ⟨hal-03666537⟩

• Article dans une revue

Mock-up Study of the Effect of Wall distance on the Thermal Rating of Power Cables in Ventilated Tunnels

Fahd Boukrouche, Christophe Moreau, Julien Pellé, François Beaubert, Souad Harmand, Olivier Moreau

Power transmission through power cables installed in ventilated tunnels is increasingly used worldwide and offers a complex thermal environment. Established correlations currently in use have been deduced from a nonfully developed turbulent flow and the effect of the proximity to a tunnel wall is…

IEEE Transactions on Power Delivery, 2017, 32 (6), pp.2453 - 2461. ⟨10.1109/TPWRD.2016.2629285⟩. ⟨hal-03461856⟩

• Article dans une revue

Effect of Operating Parameters on the Heat Transfer and Liquid Film Thickness of Revolving Heat Pipe

Hamdy Hassan, Souad Harmand

This paper presents a study on the effects of operating parameters on the liquid film thickness and heat transfer of revolving heat pipe. The effects of speed, radius of rotation, evaporator and condenser temperatures, and mass of the working fluid are considered. Also, the effects of these…

Heat Transfer Engineering, 2017, 38 (5), pp.538-548. ⟨10.1080/01457632.2016.1195175⟩. ⟨hal-03461759⟩

• Article dans une revue

A heuristic hybrid framework for vector job scheduling

Nareyus I Lawrance Amaldass, Cormac Lucas, Nenad Mladenovic

We examine the first phase of a known NP-hard 2-stage assembly problem. It consists of sequencing a set of jobs having multiple components to be processed. Each job has to be worked on independently on a specific machine. We consider these jobs to form a vector of tasks. Our objective is to…

Yugoslav Journal of Operations Research, 2017, 27 (1), pp.31-45. ⟨10.2298/YJOR150416013A⟩. ⟨hal-03402393⟩

• Rapport

Caractérisation de l’éco-conduite pour la conduite de tramways

Salvatore La Delfa, Rudy Dahyot, Simon Enjalbert, Philippe Polet, Sébastien Lefebvre, Denis Miglianico, Frédéric Vanderhaegen, Richard Kaczmarek

[Rapport de recherche] Université de valenciennes et du Hainaut-Cambrésis. 2017. ⟨hal-03423304⟩