Publications

• Article dans une revue

A2PG: alternative action plan generator

Wided Ben Yahia, Frédéric Vanderhaegen, Philippe Polet, Nicolas Tricot

This study concerns the safety analysis of human-machine systems. Accidents are mainly caused by human operators' failure in complying with the equipment's safety rules. The aim of safety analysis was to evaluate the potential risks of a system. This analysis is usually based on a…

Cognition, Technology and Work, 2015, 17, pp.95-109. ⟨10.1007/s10111-014-0287-x⟩. ⟨hal-02600865⟩

• Rapport

Critères d’inclusions des sujets d’expérimentations à partir de l’enquête et de la synthèse bibliographique

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2015. ⟨hal-03420760⟩

• Rapport

Analyse biomécanique préliminaire de l’interaction passager/siège dans le cas d’un passager à mobilité réduite (personnes âgées, personnes avec canne, personne en surpoids)

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2015. ⟨hal-03420775⟩

• Communication dans un congrès

Towards a multi-criteria decision making approach for the selection of the distribution center under uncertain environment

Maroi Agrebi, Mourad Abed, Mohamed Nazih Omri

PhD Welcome Seminar, Jan 2015, Lille, France. ⟨hal-03519407⟩

• Communication dans un congrès

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin, Nachida Bourabaa, Eric Delacourt, Céline Morin, Xavier Fischer, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents a method to improve cylinder design of 2-stroke auto-ignition engine based on a CFD (Computational Fluid Dynamics) study of internal flows in the chamber and an unsteady global 0D parametric approach. In 2-stroke engine, scavenging process plays an important role regarding…

7th International Exergy, Energy and Environment Symposium (IEEES-7), Apr 2015, Valenciennes, France. ⟨10.36884/jafm.9.SI1.26397⟩. ⟨hal-01331189⟩

• Communication dans un congrès

Failure stress criterion for adhesively bonded joint at different strain rates by using dynamic Arcan test device

Ludovic Dufour, Benjamin Bourel, Franck Lauro, Grégory Haugou, Nicolas Leconte, Nicolas Carrere

The purpose of this work is to determine the failure criterion evolution of assembly bonded with a strain rate dependent adhesive. A new modified ARCAN device is then designed to obtain the average stress at failure under different loading angles and for strain up to 350 s −1. Tests are performed…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01024, ⟨10.1051/epjconf/20159401024⟩. ⟨hal-03433146⟩

• Communication dans un congrès

Enhanced quality using intensive test and analysis on simulators

Reda Nouacer, Manel Djemal, Smail Niar, Gilles Mouchard, N. Rapin, J.-P. Gallois, P. Fiani, F. Chastrette, T. Adriano, B. Maceachen

Embedded systems are becoming ubiquitous and are subject to demanding standards in both safety and reliability. Modern vehicles, which must respect ISO 26262 standards, use up to 100 Electronic Control Unit (ECUs). Advances in microelectronics enable integration of more functions in the ECU, but at…

2015 Euromicro Conference on Digital System Design, Aug 2015, Funchal, Portugal. pp.152-157, ⟨10.1109/DSD.2015.17⟩. ⟨cea-01836305⟩

• Rapport

Mise en forme d’une griffe de jonction de caténaire en alliage de cuivre CuNiSi

Andrés Malo-Estepa, Julie Chalon, Laurent Dubar, André Dubois

[Rapport de recherche] LAMIH, Université Polytechnique des Hauts-de-France. 2015. ⟨hal-03438959⟩

• Communication dans un congrès

An MIP approach to optimize the fundamental period of multi-cluster tools system with residency constraints

Zhu Wang, Abdelghani Bekrar, Damien Trentesaux, Binghai Zhou

This paper addresses the modeling and scheduling problem of multi-cluster tools with residency constraints. On the basis of time constraint sets, the problem is formulated as a mixed integer programming problem with objective of minimizing the fundamental period. A deadlock-free solution for…

15th IFAC Symposium on Information Control Problems in Manufacturing, May 2015, Ottawa, Canada. pp.1732-1737, ⟨10.1016/j.ifacol.2015.06.336⟩. ⟨hal-03416572⟩

• Chapitre d'ouvrage

Ubiquity, Multiple Devices and Tangibility

Káthia Marçal de Oliveira, Elizabeth Sucupira Furtado, Júlio Guido Militao, Rossana Maria de Castro Andrade, Leonardo Cunha de Miranda

I GranDIHC-BR — Grand Research Challenges in Human-Computer Interaction in Brazil, Brazilian Computer Society, pp.24-27, 2015, 978-85-7669-296-6. ⟨hal-03378934⟩