Publications

• Article dans une revue

Two-machine flow shop with synchronized periodic maintenance

Issam Krimi, Rachid Benmansour, Said Hanafi, Nizar Elhachemi

In the literature, some works deal with the two-machine flow shop scheduling problem under availability constraints. Most of them consider those constraints only for one machine at a time and also with limited unavailability periods. In this work, we were interested by the unlimited periodic and…

RAIRO - Operations Research, 2019, 53 (1), pp.351-365. ⟨10.1051/ro/2018062⟩. ⟨hal-02925343⟩

• Communication dans un congrès

A novel method to generalize time-frequency coherence analysis between EEG or EMG signals during repetitive trials with high intra-subject variability in duration

Maxime Fauvet, Sylvain Cremoux, Alexandre Chalard, Joseph Tisseyre, David Gasq, David Amarantini

Time-frequency coherence analysis between EEG and EMG signals represents a valuable tool to gain insight into neural mechanisms underlying motor control. However, for self-paced movements, the variability of inter-trial duration limits its proper use. To overcome this obstacle, we propose a time-…

2019 9th International IEEE/EMBS Conference on Neural Engineering (NER), Mar 2019, San Francisco (CA), United States. pp.437-440, ⟨10.1109/NER.2019.8716973⟩. ⟨hal-04364689⟩

• Communication dans un congrès

Model free active flow control of a simplified car model

Baptiste Plumejeau, Sebastien Delprat, Laurent Keirsbulck

A model free control (MFC) approach is presented and used to symmetrize the unstable wake flow of a simplified car model named Ahmed body. Such unstable phenomena with regards to the space-time evolution of the low pressure wake vortex core, is known to increase the global drag of square back…

9th IFAC Symposium on Advances in Automotive Control, AAC 2019, Jun 2019, Orléans, France. pp.115-120, ⟨10.1016/j.ifacol.2019.09.019⟩. ⟨hal-03679780⟩

• Article dans une revue

Fluid flow and convective heat transfer analysis on a rotor of wind turbine alternator with an impinging jet

Chadia Haidar, Rachid Boutarfa, Souad Harmand

This work presents a numerical and experimental study of convection heat transfer in the unconfined air gap of a discoidal technology rotor-stator system. In particular, the rotor is cooled here by an eccentric air jet impingement. The cavity is characterized by a dimensionless spacing G = 0.02 and…

International Journal of Renewable Energy Research, 2019, 9 (3), pp.1144-1153. ⟨10.20508/ijrer.v9i3.9471.g7692⟩. ⟨hal-03451512⟩

• Article dans une revue

Observer-based consensus for second-order multi-agent systems with arbitrary asynchronous and aperiodic sampling periods

Tomas Menard, Emmanuel Moulay, Patrick Coirault, Michael Defoort

A novel distributed consensus protocol, where only sampled position information is exchanged between neighboring agents, is designed for second-order multi-agent systems under a directed communication topology. This protocol allows to reach the consensus for asynchronous and aperiodic sampling…

Automatica, 2019, 99, pp.237-245. ⟨10.1016/j.automatica.2018.10.045⟩. ⟨hal-01969335⟩

• Communication dans un congrès

Control of SISO Non-Affine-in-Control discrete systems using Takagi-Sugeno models

Thierry-Marie Guerra, Tran Anh-Tu Nguyen, Michael Defoort

This paper deals with the stabilization problem for single-input-single-output (SISO) non-affine-in-control nonlinear discrete-time systems. Generally, this non-affine-in-control problem leads to algebraic loops and a classical solution consists in using dynamic extensions. Based on Takagi-Sugeno (…

5th IFAC Conference on Intelligent Control and Automation Sciences ICONS 2019, Aug 2019, Belfast, United Kingdom. pp.79-84. ⟨hal-03457203⟩

• Chapitre d'ouvrage

Metal Forming and Lubrication

André Dubois, Abu N.M. Karim

In metal forming (cold or hot), localized compressive force is applied on the workpiece through a forming tool. This force leads to generate high contact pressures at the workpiece/tool interface and as a result the workpiece is deformed to deliver a desired shape and surface of the product. In…

Reference Module in Materials Science and Materials Engineering, Elsevier, 2019, 978-0-12-803581-8. ⟨10.1016/B978-0-12-803581-8.03565-7⟩. ⟨hal-03651843⟩

• Article dans une revue

Joining the blunt and the pointy end of the spear: towards a common framework of joint action, human–machine cooperation, cooperative guidance and control, shared, traded and supervisory control

Frank Flemisch, David Abbink, Makoto Itoh, Marie-Pierre Pacaux-Lemoine, Gina Wessel

To introduce this special issue of shared and cooperative control, we will look into history of tools in cooperation between humans and aim to unify the plethora of related concepts and definitions that have been proposed in recent years, such as shared control, human–machine cooperation and…

Cognition, Technology and Work, 2019, 21 (4), pp.555-568. ⟨10.1007/s10111-019-00576-1⟩. ⟨hal-03644221⟩

• Article dans une revue

Material behaviour at low temperatures for calibrating cryogenic machining numerical simulations

Rachele Bertolini, Stefania Bruschi, Andrea Ghiotti, Grégory Haugou, Hervé Morvan, Laurent Dubar

Recently, cryogenic machining of difficult-to-cut alloys has been adopted to increase tool life and improve the machined components surface integrity. Numerical models of cryogenic machining are being developed to evaluate the influence of the different process parameters. Up to now, their…

Procedia CIRP, 2019, 82, pp.344-349. ⟨10.1016/j.procir.2019.04.160⟩. ⟨hal-03609147⟩

• Communication dans un congrès

Decoupling Unknown Input Observer for nonlinear LPV systems

Dalil Ichalal, Thierry-Marie Guerra

58th IEEE Conference on Decision and Control, Institute of Electrical and Electronics Engineers (IEEE), Jan 2019, Nice, France. ⟨hal-03433037⟩