Publications

• Article dans une revue

Mesh Twisting Technique for Swirl Induced Laminar Flow Used to Determine a Desired Blade Shape

Asdis Helgadottir, Sylvain Lalot, François Beaubert, Halldor Pálsson

Swirling flow has been shown to increase heat transfer in heat exchangers. However, producing swirl while not presenting a severe pressure drop can be a challenge. In this paper, a desired shape of guidance blades for laminar swirl flow is determined by numerical simulation in OpenFOAM. Emphasis is…

Applied Sciences, 2018, 8 (10), pp.1865. ⟨10.3390/app8101865⟩. ⟨hal-03449889⟩

• Article dans une revue

An Incremental Physically-Based Model of P91 Steel Flow Behaviour for the Numerical Analysis of Hot-Working Processes

Alberto Murillo-Marrodán, Eli Saúl Puchi-Cabrera, Eduardo Garcia, Mirentxu Dubar, Fernando Cortes, Laurent Dubar

This paper is aimed at modelling the flow behaviour of P91 steel at high temperature and a wide range of strain rates for constant and also variable strain-rate deformation conditions, such as those in real hot-working processes. For this purpose, an incremental physically-based model is proposed…

Metals, 2018, 8 (4), pp.269. ⟨10.3390/met8040269⟩. ⟨hal-03450069⟩

• Article dans une revue

LMI-Based Exponential Estimates for Time-Delay Nonlinear Descriptor Systems ⁎ ⁎This work has been supported by the postdoctoral fellowship for CVU 366627, the ITSON Projects PROFAPI CA-18 2017-0088 and 2018-1062, and PFCE 2016-17. Juan Carlos Arceo was student at ITSON under CONACYT scholarship 415714 during the realization of this work.

Juan Carlos Arceo Luzanilla, Raúl Villafuerte, Víctor Estrada Manzo, Miguel Bernal

This paper presents novel results on exponential estimates for time-delay nonlinear descriptor systems with nonsingular left-hand side. By means of a Lyapunov-Krasovskii functional and an exact convex representation of the system, conditions in the form of linear matrix inequalities are found that…

IFAC-PapersOnLine, 2018, 51 (10), pp.139-144. ⟨10.1016/j.ifacol.2018.06.251⟩. ⟨hal-03671715⟩

• Article dans une revue

Razumikhin-type Theorems on Practical Stability of Dynamic Equations on Time Scales

Bacem Ben Nasser, Michael Defoort, Mohamed Djemai, Taous-Meriem Laleg-Kirati

In this work, we investigate some Razumikhin-type criteria for the uniform global practical asymptotic stability on arbitrary time domains, for time-varying dynamic equations. Using Lyapunov-type functions on time scales, we develop appropriate inequalities ensuring that trajectories decay to the…

IFAC-PapersOnLine, 2018, 51 (16), pp.121-126. ⟨10.1016/j.ifacol.2018.08.021⟩. ⟨hal-03671746⟩

• Article dans une revue

High performance LDPC codes for high spectral efficiency

Latifa Mostari, Abdelmalik Taleb-Ahmed, Abdennacer Bounoua

Achieving high spectral efficiency is the key requirement of future wireless systems and mobile communications because it provides us a high quality for high data over a limited bandwidth. In order to achieve high spectral efficiency, channel coding and modulation are the key part. Basically, high…

Internetworking Indonesia Journal, 2018, 10 (1), pp.9-15. ⟨hal-03676514⟩

• Article dans une revue

Implementing advanced Takagi-Sugeno controllers: application to throttle control of a gasoline engine

Thomas Josso-Laurain, Jimmy Lauber, Reinaldo Martinez Palhares

This paper is dedicated to the implementation process of advanced Takagi-Sugeno controllers. The considered application is the control of the throttle of a gasoline engine running at idle speed. In order to design a model-based control, a model is first obtained and identified with an engine test…

IFAC-PapersOnLine, 2018, 51 (10), pp.145-150. ⟨10.1016/j.ifacol.2018.06.252⟩. ⟨hal-03675878⟩

• Article dans une revue

Friction coefficients in cold forging: A global perspective

Peter Groche, Philipp Kramer, Niels Bay, Peter Christiansen, Laurent Dubar, K. Hayakawa, Chengliang Hu, K. Kitamura, Philippe Moreau

Worldwide, at least twenty different tribological tests have been proposed for the empirical determination of friction coefficients in cold forging processes. Due to the varying test setups, means of measurement, and level of abstraction, the comparability of the outcomes is, however, disputable.…

CIRP Annals - Manufacturing Technology, 2018, 67 (1), pp.261-264. ⟨10.1016/j.cirp.2018.04.106⟩. ⟨hal-03450016⟩

• Communication dans un congrès

Génération automatique et vérification formelle de programmes d'API sécurisés pour les systèmes de contrôle ferroviaires Génération automatique et vérification formelle de programmes d'API sécurisés pour les systèmes de contrôle ferroviaires

Mohamed Niang, Bernard Riera, Philippot Alexandre, Serge Debernard

Journées STP du GDR MACS, 2018, Clermont-Ferrand, France. ⟨hal-02151107⟩

• Communication dans un congrès

Evolution of holonic control architectures towards Industry 4.0: A short overview

Olivier Cardin, William Derigent, Damien Trentesaux

The flexibility claimed by the next generation production systems induces a deep modification of the behavior and the core itself of the control systems. Overconnectivity and data management abilities targeted by Industry 4.0 paradigm enable the emergence of more flexible and reactive control…

16th IFAC Symposium on Information Control Problems in Manufacturing, INCOM 2018, Jun 2018, Bergamo, Italy. pp.1243-1248, ⟨10.1016/j.ifacol.2018.08.420⟩. ⟨hal-01900270⟩

• Communication dans un congrès

Impact of self-rewetting fluids on the performance of capillary evaporators

A. Boubaker, Vincent Platel, Souad Harmand

International Conference on Materials & Energy (ICOME18), Apr 2018, San Sebastian, Spain. ⟨hal-02144717⟩