Publications

• Article dans une revue

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin, Nachida Bourabaa, Eric Delacourt, Céline Morin, Xavier Fischer, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents a method to improve cylinder design of 2-stroke auto-ignition engine based on a CFD (Computational Fluid Dynamics) study of internal flows in the chamber and an unsteady global 0D parametric approach. In 2-stroke engine, scavenging process plays an important role regarding…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.69-80. ⟨10.36884/jafm.9.SI1.26397⟩. ⟨hal-01330948⟩

• Article dans une revue

A new reduced model of scavenging to optimize cylinder design

Stéphanie Cagin, Xavier Fischer, Eric Delacourt, Nachida Bourabaa, Céline Morin, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents the development of a new scavenging model to optimize cylinder design. The developed model explicitly integrates some of the cylinder’s design and environmental variables to describe flows during the scavenging process. Then, based on the reduced model, an optimization phase was…

SIMULATION: Transactions of The Society for Modeling and Simulation International, 2016, 92 (6), pp.507-520. ⟨10.1177/0037549716644516⟩. ⟨hal-01330975⟩

• Rapport

Pistes d’amélioration d’un siège d’avion pour passager à mobilité réduite

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2016. ⟨hal-03420631⟩

• Article dans une revue

Experimental study on the stability of an impedance-type force-feedback architecture based on an augmented-state observer for a haptic system under time delay using a LMI approach

Quoc Viet Dang, Laurent Vermeiren, Antoine Dequidt, Michel Dambrine

One of the most important performance measures of a haptic interface may be characterized by its behaviour in the implementation of a virtual wall in terms of the biggest value of the virtual stiffness that still leaves the device stable. This value depends on many factors including time delays and…

Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2016, 230 (1), pp.58-71. ⟨10.1177/0959651815611566⟩. ⟨hal-03426981⟩

• Article dans une revue

Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling

Mahmoud Charmiyan, Ahmed-Reza Azimian, Laurent Keirsbulck, Ebrahim Shirani, Fethi Aloui

A 3D numerical simulation using large eddy simulation (LES) method is performed for a submerged turbulent water slot jet impinging normally on a flat plate with a nozzle-to-plate distance of 10 jet width and a Reynolds number of 16000 and the results are compared with the existing experimental data…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.11-17. ⟨10.36884/jafm.9.SI1.25825⟩. ⟨hal-03448221⟩

• Chapitre d'ouvrage

Measurements of dynamic properties of ballistic yarns using innovative testing devices

Caroline Chevalier, Christophe Kerisit, Andreas Klavzar, François Boussu, Daniel Coutellier

This chapter highlights the influence of the dynamic characteristic of yarn on the ballistic performance of fabric submitted to impact. A brief review of existing research works done on the dynamic tensile test known as the Hopkinson bar, and more recently the Split Flying Bar, is presented. A new…

Advanced Fibrous Composite Materials for Ballistic Protection, Elsevier, pp.199-215, 2016, 978-178242461-1. ⟨10.1016/B978-1-78242-461-1.00007-8⟩. ⟨hal-03667392⟩

• Communication dans un congrès

HCI Engineering Integrated with Capability Maturity Models

Taisa Guidini Gonçalves, Káthia Marçal de Oliveira, Christophe Kolski

Even though coming from different communities, Software Engineering (SE) and Human-Computer Interaction (HCI) engineering have similar goals: the definition of methods, techniques and standards to support the development of software systems, and, in particular for HCI, of interactive systems.…

10th International Conference on Research Challenges in Information Science, IEEE RCIS 2016, Institute of Electrical and Electronics Engineers (IEEE), May 2016, Grenoble, France. pp.633-644, ⟨10.1109/RCIS.2016.7549319⟩. ⟨hal-03350385⟩

• Article dans une revue

Turbulent Flows Structures Crossing Conical Diffusers: Angle Effect Analysis using PIV Technique and POD for Post-Processing

Emna Berrich, Fethi Aloui, D Pierrat, L Gros, Anthony Couzinet, Jack Legrand

In this work, we investigated experimentally the hydrodynamics of flows crossing conical diffusers. On our previous work (Aloui et al., 2011), CFD turbulent models were validated for flows crossing the critical angle (2α=16°). Indeed, the PIV data base constructed was exploited to validate a…

Journal of Applied Fluid Mechanics, 2016, 9 (Special Issue 1), pp.19-29. ⟨10.36884/JAFM.9.SI1.25827⟩. ⟨hal-01349723⟩

• Communication dans un congrès

Using Discrete Event Simulation to evaluate Operating Theater Layout

Abdelahad Chraibi, Abdessamad Ait El Cadi, Said Kharraja, Abdelhakim Artiba

The layout planning of an organization is known to have a great impact on its quality and performance during daily operations. The Operating Theater (OT) is an organization characterized by a fluctuating production and unpredictability of care demand. This unpredictability of populations’ needs has…

IFAC-PapersOnLine, Jun 2016, Troyes, France. pp.95-98, ⟨10.1016/j.ifacol.2016.07.556⟩. ⟨hal-03383338⟩

• Article dans une revue

A general variable neighbourhood search for the multi-product inventory routing problem

Anis Mjirda, Bassem Jarboui, Jelena Mladenović, Christophe Wilbaut, Said Hanafi

The inventory routing problem (IRP) deals with the study of the inter-relationship between two important activities in the supply chain: transportation of commodities and inventory management. In this paper, we study a variant of the multi-product IRP and we propose a general variable neighbourhood…

IMA Journal of Management Mathematics, 2016, 27 (1), pp.39-54. ⟨10.1093/imaman/dpu020⟩. ⟨hal-03400808⟩