Publications

• Article dans une revue

Comparison Based on Exergetic Analyses of Two Hot Air Engines: A Gamma Type Stirling Engine and an Open Joule Cycle Ericsson Engine

Houda Hachem, Marie Creyx, Ramla Gheith, Eric Delacourt, Céline Morin, Fethi Aloui, Sassi Ben Nasrallah

In this paper, a comparison of exergetic models between two hot air engines (a Gamma type Stirling prototype having a maximum output mechanical power of 500 W and an Ericsson hot air engine with a maximum power of 300 W) is made. Referring to previous energetic analyses, exergetic models are set up…

Entropy, 2015, 17 (11), pp.7331-7348. ⟨10.3390/e17117331⟩. ⟨hal-03448497⟩

• Article dans une revue

Thermocapillary instability in an evaporating two-dimensional thin layer film

Andriy A. Avramenko, Igor V. Shevchuk, Souad Harmand, Andrii I. Tyrinov

A novel two-dimensional model for the thermocapillary instability of a thin liquid film was developed and validated in the paper. The model incorporates a novel solution for the unperturbed velocity components and the thin film thickness (based on the boundary layer approach and balance equation)…

International Journal of Heat and Mass Transfer, 2015, 91, pp.77-88. ⟨10.1016/j.ijheatmasstransfer.2015.07.063⟩. ⟨hal-03448389⟩

• Article dans une revue

Scheduling operating theatres: Mixed integer programming vs. constraint programming

Tao Wang, Nadine Meskens, David Duvivier

The daily scheduling of an operating theatre is a highly constrained problem. In addition to standard scheduling constraints, many additional constraints on human and material resources encountered in real life should be taken into account. These constraints concern the priority of operations, the…

European Journal of Operational Research, 2015, 247 (2), pp.401 - 413. ⟨10.1016/j.ejor.2015.06.008⟩. ⟨hal-01787907⟩

• Article dans une revue

Framework for a Selection of Custom Instructions for Ht-MPSoC in Area-performance Aware Manner

Bouthaina Dammak, Mouna Baklouti, Rachid Benmansour, Smail Niar, Mohamed Abid

Using application-specific instructions for heterogeneous multiprocessor system-on-chip (Ht-MPSoC) allows to find a good performance/energy trade-off. For MPSoC architecture executing different multimedia applications, we expect a large number of potential custom instructions. In order to explore…

IEEE Embedded Systems Letters, 2015, 7 (4), pp.105-108. ⟨10.1109/LES.2015.2461626⟩. ⟨hal-03401079⟩

• Article dans une revue

A two-stage flow shop scheduling problem with transportation considerations

Nacira Chikhi, Moncef Abbas, Rachid Benmansour, Abdelghani Bekrar, Said Hanafi

This paper considers a two-stage robotic flow shop scheduling problem of which the objective is to minimize the maximum completion time of all the jobs. The problem consists of two dedicated machines at the first stage and a single machine at the second stage. Each job is defined by two operations…

4OR: A Quarterly Journal of Operations Research, 2015, 13 (4), pp.381-402. ⟨10.1007/s10288-015-0297-4⟩. ⟨hal-03402138⟩

• Article dans une revue

Simplified soft output demapper for non-binary LDPC codes

Latifa Mostari, Abdelmalik Taleb-Ahmed, Abdennacer Bounoua

Combining non-binary LDPC codes and high order constellation, namely Bit-Interleaved Coded Modula-tion (BICM), is a simple but effective way to improve the bandwidth efficiency. Since the non-binary LDPCcodes require soft decisions as the input information, the constellation has to provide soft…

Optik, 2015, 126 (24), pp.5074-5076. ⟨10.1016/j.ijleo.2015.09.210⟩. ⟨hal-03428153⟩

• Communication dans un congrès

Sûreté, sécurité et résilience.

Jean-René Ruault

XXIe Forum Systèmes et Logiciels pour les NTIC dans le transport "Sûreté et Sécurité dans les Transports", Dec 2015, Paris, France. ⟨hal-03396036⟩

• Article dans une revue

Fuzzy control turns 50: 10 years later

Thierry-Marie Guerra, Kazuo Tanaka, Antonio Sala

In 2015, we celebrate the 50th anniversary of Fuzzy Sets, ten years after the main milestones regarding its applications in fuzzy control in their 40th birthday were reviewed in FSS, see [1]. Ten years is at the same time a long period and short time thinking to the inner dynamics of research. This…

Fuzzy Sets and Systems, 2015, 281, pp.168-182. ⟨10.1016/j.fss.2015.05.005⟩. ⟨hal-03428386⟩

• Article dans une revue

Arezzo-flexible manufacturing system: A generic flexible manufacturing system shop floor emulator approach for high-level control virtual commissioning

Thierry Berger, Dominique Deneux, Thérèse Bonte, Etienne Cocquebert, Damien Trentesaux

The benchmark of several high-level control strategies is required during the design of flexible manufacturing systems. Virtual commissioning is a popular approach to test and validate the behavior of the target control system based on a virtual model. It can actually simulate and help study the…

Concurrent Engineering: Research and Applications, 2015, 23 (4), pp.333-342. ⟨10.1177/1063293X15591609⟩. ⟨hal-03430062⟩

• Thèse

Caractérisation biomécanique des différents mécanismes impliqués dans l'instabilité chronique de la cheville, Biomechanical characterization of the different mechanisms involved in Chronic Ankle Instability

Raphaël Pionnier

L’Instabilité Chronique de la Cheville (ICC) est une possible complication fonctionnelle consécutive à une entorse collatérale latérale et est définie par une sensation de « giving way » décrite subjectivement, qui correspond au dérobement de la cheville pendant sa mise en charge. Afin de mieux…, Chronic Ankle Instability (CAI) is a possible functional complication consecutive to a lateral ankle sprain and is defined by a feeling of ankle “giving way”, subjectively described, which corresponds to a flinch of this joint during its loading. In order to improve CAI characterization, it is…

Ingénierie biomédicale. Université de Valenciennes et du Hainaut-Cambresis, 2015. Français. ⟨NNT : 2015VALE0033⟩. ⟨tel-01271356⟩