Publications

• Article dans une revue

Using the BCD model for risk analysis

Karima Sedki, Philippe Polet, Frédéric Vanderhaegen

In this paper, we are interested in addressing risk analysis. We propose an influence diagram-based approach that focuses on a Benefit, Cost, Deficit (BCD) model. The BCD model is proposed for studying the intentional deviant behaviors of human operators in a system. In this model, the consequences…

Engineering Applications of Artificial Intelligence, 2013, 26 (9), pp.2172-2183. ⟨10.1016/j.engappai.2013.06.009⟩. ⟨hal-03405576⟩

• Communication dans un congrès

Intelligent Products: A Spinal Column to Handle Information Exchanges in Supply Chains

Damien Trentesaux, Bernard Grabot, Yves Sallez

This paper outlines some practical problems linked to information exchange occurring in nowadays supply chains, with a special emphasis on the aeronautical sector. The Intelligent Product paradigm is presented as an adequate solution to address some of these problems and to provide rapid gains…

20th Advances in Production Management Systems (APMS), Sep 2013, State College, PA, United States. pp.452-459, ⟨10.1007/978-3-642-41263-9_56⟩. ⟨hal-01449753⟩

• Article dans une revue

Design guidelines for quality of service support in Optimized Link State Routing-based mobile ad hoc networks

Patrick Sondi, Dhavy Gantsou, Sylvain Lecomte

he proposals for quality of service in mobile ad hoc networks have focused on adding QoS mechanisms in best-effort routing protocols while keeping the same assumptions regarding both the network representation and the routing protocol design. Most of the solutions concentrate the algorithmic effort…

Ad Hoc Networks, 2013, 11 (1), pp.298-323. ⟨10.1016/j.adhoc.2012.06.001⟩. ⟨hal-03451428⟩

• Article dans une revue

Influence of the roughness of sandblasted surface on the measurement of hardness by nanoindentation, Influence de l’amplitude de la rugosité de surfaces sablées sur la mesure de dureté par nanoindentation

Hsin Shen Ho, Yang Xia, Julie Marteau, Maxence Bigerelle

Nanoindentation tests are often used to characterize the surface mechanical properties of materials. However, this technique lacks repeatability: when different zones of the same specimen are tested, there can be large differences between the nanoindentation curves. One of the main causes is the…, Les essais de nanoindentation sont souvent utilisés pour caractériser les propriétés mécaniques des matériaux en proche surface. Cependant, cette technique manque de reproductibilité : une même réponse mécanique est difficilement obtenue par les essais de nanoindentation sur différentes zones de la…

Matériaux et Techniques, 2013, 101 (3), pp.305. ⟨10.1051/mattech/2013070⟩. ⟨hal-02968730⟩

• Article dans une revue

Bone texture analysis is correlated with three-dimensional microarchitecture and mechanical properties of trabecular bone in osteoporotic femurs

Thomas Le Corroller, Martine Pithioux, Fahmi Chaari, Benoit Rosa, Sebastien Parratte, Boris Maurel, Jean-Noël Argenson, Pierre Champsaur, Patrick Chabrand

Fracture of the proximal femur is a major public health problem in elderly persons. It has recently been suggested that combining texture analysis and bone mineral density measurement improves the failure load prediction in human femurs. In this study, we aimed to compare bone texture analysis with…

Journal of Bone and Mineral Metabolism, 2013, 31 (1), pp.82-88. ⟨10.1007/s00774-012-0375-z⟩. ⟨hal-01438690⟩

• Rapport

Environnement de simulation temps-réel sur architecture hétérogène CPU-FPGA : EuroSim.

Zeineb Baklouti, David Duvivier, Rabie Ben Atitallah

[Rapport de recherche] LAMIH, Valenciennes. 2013. ⟨hal-03388899⟩

• Article dans une revue

Frequency based indicator for driver differentiation during steering exercises

François Gabrielli, Jessica Schiro, Philippe Pudlo, Franck Barbier, Mohamed Djemai

AMSE, Journal of the Association for the Advancement of Modelling and Simulation Techniques in Enterprises, 2013, 73 (3), pp.34-45. ⟨hal-03468608⟩

• Communication dans un congrès

When motor simulation of disequilibrium increases postural stability

Loïc Heurley, Emilie Simoneau-Buessinger, Sebastien Leteneur, Denis Brouillet

XXXVIIIe Congrès de la Société de Biomécanique, Sep 2013, Marseille, France. pp.44-45, ⟨10.1080/10255842.2013.815900⟩. ⟨hal-03388652⟩

• Communication dans un congrès

Holonic recursiveness with multi-agent system technologies

Sonia Suárez, Paulo Leitão, Emmanuel Adam

Recursive Systems are often needed or recommended for automatically deploy or build a software system composed of multiple entities on a large network, or on distributed locations, without a central control. We use the recursive definitions proposed in holonic systems, as the recursiveness is an…

11th International Conference on Practical Applications of Agents and multi-Agents systems, May 2013, Salamanque, Spain. pp.103-111, 978-3-319-00562-1, ⟨10.1007/978-3-319-00563-8_13⟩. ⟨hal-03472711⟩

• Chapitre d'ouvrage

A Generic Method for Personalizing Interactive Systems: application to traveler information

Mourad Abed, Abdouroihamane Anli, Christophe Kolski, Emmanuelle Grislin-Le Strugeon

Following the wide development of distributed and networked information sources, more specifically on the Internet, the advantage of benefiting from reference points, such as “portal” sites that offer facilitated, even personalized access to all available resources became apparent. The…

Christophe Kolski. Human-Computer Interactions in Transport, John Wiley & Sons, pp.51-91, 2013, 978-1-84821-279-4. ⟨10.1002/9781118601907.ch3⟩. ⟨hal-03405645⟩