Publications

• Article dans une revue

Variable neighborhood search for the travelling deliveryman problem

Nenad Mladenovic, Dragan Urošević, Said Hanafi

A travelling deliveryman needs to find a tour such that the total waiting time of all the customers he has to visit is minimum. The deliveryman starts his tour at a depot, travelling at constant velocity. In this paper we suggest a general variable neighborhood search based heuristic to solve this…

4OR: A Quarterly Journal of Operations Research, 2013, 11 (1), pp.57-73. ⟨10.1007/s10288-012-0212-1⟩. ⟨hal-03594522⟩

• Article dans une revue

Benchmarking Flexible Job-Shop Scheduling and Control Systems

Damien Trentesaux, Cyrille Pach, Abdelghani Bekrar, Yves Sallez, Thierry Berger, Thérèse Bonte, Paulo Leitão, José Barbosa

Benchmarking is comparing the output of different systems for a given set of input data in order to improve the system's performance. Faced with the lack of realistic and operational benchmarks that can be used for testing optimization methods and control systems in flexible systems, this…

Control Engineering Practice, 2013, 21 (9), pp.1204-1225. ⟨10.1016/j.conengprac.2013.05.004⟩. ⟨hal-03405597⟩

• Chapitre d'ouvrage

BRILLANT/BCaml - Une plateforme d’outils libres pour la méthode B

Samuel Colin, Dorian Petit

Boulanger, Jean-Louis. Mise en oeuvre de la méthode B, Hermès, pp.359-368, 2013, Informatique et systèmes d'information. Recherche, technologie, applications, 9782746238107. ⟨hal-03517848⟩

• Article dans une revue

Évaluation de requêtes mobiles basée sur une infrastructure de services

Marie Thilliez, Mikael Desertot

Revue des Sciences et Technologies de l'Information - Série ISI : Ingénierie des Systèmes d'Information, 2013, Numéro Spécial "Social, Localisation et Mobilité : de nouveaux enjeux pour la gestion des données", 18 (1), pp.107-123. ⟨hal-03517866⟩

• Article dans une revue

Using the BCD model for risk analysis

Karima Sedki, Philippe Polet, Frédéric Vanderhaegen

In this paper, we are interested in addressing risk analysis. We propose an influence diagram-based approach that focuses on a Benefit, Cost, Deficit (BCD) model. The BCD model is proposed for studying the intentional deviant behaviors of human operators in a system. In this model, the consequences…

Engineering Applications of Artificial Intelligence, 2013, 26 (9), pp.2172-2183. ⟨10.1016/j.engappai.2013.06.009⟩. ⟨hal-03405576⟩

• Communication dans un congrès

Intelligent Products: A Spinal Column to Handle Information Exchanges in Supply Chains

Damien Trentesaux, Bernard Grabot, Yves Sallez

This paper outlines some practical problems linked to information exchange occurring in nowadays supply chains, with a special emphasis on the aeronautical sector. The Intelligent Product paradigm is presented as an adequate solution to address some of these problems and to provide rapid gains…

20th Advances in Production Management Systems (APMS), Sep 2013, State College, PA, United States. pp.452-459, ⟨10.1007/978-3-642-41263-9_56⟩. ⟨hal-01449753⟩

• Article dans une revue

Design guidelines for quality of service support in Optimized Link State Routing-based mobile ad hoc networks

Patrick Sondi, Dhavy Gantsou, Sylvain Lecomte

he proposals for quality of service in mobile ad hoc networks have focused on adding QoS mechanisms in best-effort routing protocols while keeping the same assumptions regarding both the network representation and the routing protocol design. Most of the solutions concentrate the algorithmic effort…

Ad Hoc Networks, 2013, 11 (1), pp.298-323. ⟨10.1016/j.adhoc.2012.06.001⟩. ⟨hal-03451428⟩

• Article dans une revue

Influence of the roughness of sandblasted surface on the measurement of hardness by nanoindentation, Influence de l’amplitude de la rugosité de surfaces sablées sur la mesure de dureté par nanoindentation

Hsin Shen Ho, Yang Xia, Julie Marteau, Maxence Bigerelle

Nanoindentation tests are often used to characterize the surface mechanical properties of materials. However, this technique lacks repeatability: when different zones of the same specimen are tested, there can be large differences between the nanoindentation curves. One of the main causes is the…, Les essais de nanoindentation sont souvent utilisés pour caractériser les propriétés mécaniques des matériaux en proche surface. Cependant, cette technique manque de reproductibilité : une même réponse mécanique est difficilement obtenue par les essais de nanoindentation sur différentes zones de la…

Matériaux et Techniques, 2013, 101 (3), pp.305. ⟨10.1051/mattech/2013070⟩. ⟨hal-02968730⟩

• Article dans une revue

Bone texture analysis is correlated with three-dimensional microarchitecture and mechanical properties of trabecular bone in osteoporotic femurs

Thomas Le Corroller, Martine Pithioux, Fahmi Chaari, Benoit Rosa, Sebastien Parratte, Boris Maurel, Jean-Noël Argenson, Pierre Champsaur, Patrick Chabrand

Fracture of the proximal femur is a major public health problem in elderly persons. It has recently been suggested that combining texture analysis and bone mineral density measurement improves the failure load prediction in human femurs. In this study, we aimed to compare bone texture analysis with…

Journal of Bone and Mineral Metabolism, 2013, 31 (1), pp.82-88. ⟨10.1007/s00774-012-0375-z⟩. ⟨hal-01438690⟩

• Rapport

Environnement de simulation temps-réel sur architecture hétérogène CPU-FPGA : EuroSim.

Zeineb Baklouti, David Duvivier, Rabie Ben Atitallah

[Rapport de recherche] LAMIH, Valenciennes. 2013. ⟨hal-03388899⟩