Publications

• Rapport

Simplified modeling of welded joints of automobile seats

Nicolas Leconte, Gabriel Maradei, Eric Markiewicz

[Research Report] Université de Valenciennes et du Hainaut-Cambrésis. 2013. ⟨hal-03448639⟩

• Article dans une revue

Inducing Swirling Flow in Heat Exchanger Pipes for Reduced Fouling Rate

Halldor Pálsson, François Beaubert, Sylvain Lalot

Fouling buildup in circular heat exchanger pipes is a common problem in the industry. Various methods have been proposed to increase the shear stress of the fluid near the pipe wall. This is known to reduce fouling rate, as well as increasing the heat transfer rate of heat exchangers. In this…

Heat Transfer Engineering, 2013, 34 (8-9), pp.761-768. ⟨10.1080/01457632.2012.741503⟩. ⟨hal-03516939⟩

• Article dans une revue

Onset of atomization on horizontal, shear-driven liquid films at the vicinity of a sharp corner

Evangelos Bacharoudis, Hervé Bratec, Laurent Keirsbulck, Jean-Marie Buchlin, Larbi Labraga

In many engineering applications, the liquid films have to deal with sudden changes of the wall geometries in which they flow over. The present work concerns the study of the onset of the film atomization in corner geometries. Specifically, films with thickness in the range of 1 mm < hf < 2.5…

Atomization and Sprays, 2013, 23 (9), pp.763-797. ⟨10.1615/AtomizSpr.2013006811⟩. ⟨hal-03516837⟩

• Article dans une revue

Multiscale modeling of the human humerus mechanical behavior under impact

Florian Vandenbulcke, Jamila Rahmoun, Hakim Naceur, Hervé Morvan, Pascal Drazetic, Christiane Fontaine

Computer Methods in Biomechanics and Biomedical Engineering, 2013, 16, pp.211-213. ⟨10.1080/10255842.2013.815954⟩. ⟨hal-03644437⟩

• Chapitre d'ouvrage

Programmation mathématique et heuristiques pour le problème d'ordonnancement avec coûts d'avance et de retard

Mustapha Ratli, Rachid Benmansour, Rita Macedo, Said Hanafi, Christophe Wilbaut

Bassem Jarboui; Patrick Siarry; Jacques Teghem. Métaheuristiques pour l'ordonnancement monocritère des ateliers de production, Lavoisier, 266 pp., 2013, 978-2-7462-3926-5. ⟨hal-03573402⟩

• Article dans une revue

Large-Eddy simulation of turbulent heat transfer in pipe flows with respect to Reynolds and Prandtl number effects.

Meryem Ould-Rouiss, M. Bousbai, A. Mazouz

Heat transfer in a fully developed turbulent pipe flow is investigated by use of the large eddy simulation technique. Isoflux condition is imposed at the wall. Four Prandtl numbers are considered (0.71,3,5,7) and three Reynolds numbers (5500, 10000, 20000). The effects of Reynolds and Prandtl…

Acta Mechanica, 2013, 224, pp.1133-1155. ⟨10.1007/s00707-012-0796-8⟩. ⟨hal-00793634⟩

• Article dans une revue

Natural convection heat transfer of nanofluids along a vertical plate embedded in porous medium

Ziya Uddin, Souad Harmand

The unsteady natural convection heat transfer of nanofluid along a vertical plate embedded in porous medium is investigated. The Darcy-Forchheimer model is used to formulate the problem. Thermal conductivity and viscosity models based on a wide range of experimental data of nanofluids and…

Nanoscale Research Letters, 2013, 8 (1), pp.64. ⟨10.1186/1556-276X-8-64⟩. ⟨hal-03625174⟩

• Article dans une revue

Thermal Optimization of a High Power Salient-Pole Alternator

Augusto Bornschlegell, Julien Pellé, Souad Harmand, Aurélie Fasquelle, Jean-Pierre Corriou

An optimization of the thermal behavior of a high-power salient-pole electrical machine is presented. Temperatures are calculated with the lumped method, which provides the thermal trends with relatively low computational cost. This model is used to define an aggregated objective function of our…

IEEE Transactions on Industrial Electronics, 2013, 60 (5), pp.1734-1746. ⟨10.1109/TIE.2012.2190957⟩. ⟨hal-03524509⟩

• Communication dans un congrès

Open-People: Open Power and Energy Optimization PLatform and Estimator

Eric Senn, Daniel Chillet, Olivier Zendra, Cécile Belleudy, Sebastien Bilavarn, Rabie Ben Atitallah, Christian Samoyeau, Agnès Fritsch

Designing low power complex embedded systems is now a critical challenge for a large number of electronic corporations. Low power is generally critical due to its impact on lifetime, battery longevity, battery capacity, temperature constraints, etc. Unfortunately, when a designer needs some power…

DSD 2012 - 15th Euromicro Conference on Digital System Design, Sep 2012, Çeşme, Izmir, Turkey. pp.668-675, ⟨10.1109/DSD.2012.98⟩. ⟨hal-00741610⟩

• Article dans une revue

Fault diagnosis and monitoring of oscillatory failure case in aircraft inertial system

Denis Berdjag, Jérome Cieslak, Ali Zolghadri

A method for oscillatory fault detection and isolation is presented and used to detect oscillatory failures of redundant aircraft sensors involved in the computation of flight control laws. The objective is to switch off the erroneous sensor and to compute a consolidated parameter using data from…

Control Engineering Practice, 2012, 20 (12), pp.1410-1425. ⟨10.1016/j.conengprac.2012.08.007⟩. ⟨hal-00725744⟩