Publications

• ART

Calculation of greenhouse gas emissions of jatropha oil and jatropha biodiesel as alternative fuels for electricity production in Côte d’Ivoire

Atta Pascal Atta, Yao N'Guessan, Céline Morin, Anne Jaecker-Voirol, Georges Descombes

The electricity in Côte d’Ivoire is mainly produced from fossil energy sources. This causes damages on environment due to greenhouse gas emissions (GHG). The aim of this paper is to calculate the greenhouse gas (GHG) emissions of jatropha oil and jatropha biodiesel as alternative fuels for…

AIP Conference Proceedings, 2017, 1814 (1), ⟨10.1063/1.4976287⟩. ⟨hal-01504498⟩

• ART

Output Feedback Active Suspension Control With Higher Order Terminal Sliding Mode

Jagat Jyoti Rath, Michael Defoort, Hamid Reza Karimi, Kalyana Chakravarthy Veluvolu

The control of an automotive suspension system using hydraulic actuators is a highly complex nonlinear control task dealing with system nonlinearities, external disturbances, and uncertainties. In this work, an output feedback active suspension control scheme is proposed to achieve a ride comfort…

IEEE Transactions on Industrial Electronics, 2017, 64 (2), pp.1392-1403. ⟨10.1109/TIE.2016.2611587⟩. ⟨hal-03429982⟩

• ART

A basic variable neighborhood search heuristic for the uncapacitated multiple allocation p-hub center problem

Jack Brimberg, Nenad Mladenovic, Raca Todosijević, Dragan Urošević

The uncapacitated multiple allocation p-hub center problem (UMApHCP) consists of choosing p hub locations from a set of nodes with pairwise traffic demands in order to route the traffic between the origin-destination pairs such that the maximum cost between origin-destination pairs is minimum. It…

Optimization Letters, 2017, 11 (2), pp.313-327. ⟨10.1007/s11590-015-0973-5⟩. ⟨hal-03576814⟩

• ART

Can dissonance engineering improve risk analysis of human–machine systems?

Frédéric Vanderhaegen, Oliver Carsten

The paper discusses dissonance engineering and its application to risk analysis of human–machine systems. Dissonance engineering relates to sciences and technologies relevant to dissonances, defined as conflicts between knowledge. The richness of the concept of dissonance is illustrated by a…

Cognition, Technology and Work, 2017, 19 (1), pp.1-12. ⟨10.1007/s10111-017-0405-7⟩. ⟨hal-03429445⟩

• REPORT

L6300 : Modalités d’interaction homme/machine et implémentation des scénarios sur le simulateur SHERPA

Jérôme Floris, Mohamed Amir Benloucif, Philippe Simon, Serge Debernard, Chouki Sentouh, Jean-Christophe Popieul

[Rapport de recherche] LAMIH, Valenciennes. 2017. ⟨hal-03423295⟩

• ART

Modelling of the intralaminar matrix damage with friction effects of fabric reinforced polymers

Sylvain Treutenaere, Franck Lauro, Bruno Bennani, Tsukatada Matsumoto, Ernesto Mottola

Needed to simulate the behaviour of industrial components through finite element analysis, a continuum damage model formulation for fabric reinforced polymers is provided. Based on the Onera Damage Microstructure Model, it considers the influence of privileged direction of intralaminar matrix…

Composites Part B: Engineering, 2017, 111, pp.60-73. ⟨10.1016/j.compositesb.2016.12.019⟩. ⟨hal-03456464⟩

• ART

Taylor-Couette-Poiseuille flow and heat transfer in an annular channel with a slotted rotor

Nicolas Lancial, Federico Torriano, François Beaubert, Souad Harmand, Gilles Rolland

This paper investigates a Taylor-Couette-Poiseuille flow in an annular channel of a slotted rotating inner cylinder, corresponding to a salient pole hydrogenerator. The purpose of this study is to improve the understanding of flow and thermal phenomena in electrical machines using a simplified…

International Journal of Thermal Sciences, 2017, 112, pp.92-103. ⟨10.1016/j.ijthermalsci.2016.09.022⟩. ⟨hal-03451964⟩

• ART

Design of toughened PLA based material for application in structures subjected to severe loading conditions. Part 2. Quasi-static tensile tests and dynamic mechanical analysis at ambient and moderately high temperature

Amani Bouzouita, Delphine Notta-Cuvier, Rémi Delille, Franck Lauro, Jean-Marie Raquez, Philippe Dubois

The suitability of a ternary composition 58 wt% polylactide (PLA) - 25 wt% poly (methyl methacrylate) (PMMA) - 17 wt% Impact modifier (Biomax®Strong - BS) for use in technical parts subjected to severe loading conditions continues to be investigated. Previous work has demonstrated that PLA-PMMA-BS…

Polymer Testing, 2017, 57, pp.235-244. ⟨10.1016/j.polymertesting.2016.11.034⟩. ⟨hal-03456427⟩

• ART

Computational modeling of heat transfer in rotating heat pipes using nanofluids: A numerical study using PSO

Ziya Uddin, Souad Harmand, Shahid Ahmed

Research conduct investigations to implement the appropriate numerical models for the properties of nano-fluids that satisfy a wide range of experimental data, and study the effects of fluid mass to be inserted in the pipe, rotation speed of the machine, nano-particle size and nano-particle…

International Journal of Thermal Sciences, 2017, 112, pp.44-54. ⟨10.1016/j.ijthermalsci.2016.09.035⟩. ⟨hal-03451949⟩

• ART

General variable neighborhood search for the uncapacitated single allocation p-hub center problem

Jack Brimberg, Nenad Mladenovic, Raca Todosijević, Dragan Urošević

In this paper we propose a general variable neighborhood search heuristic for solving the uncapacitated single allocation p-hub center problem (USApHCP). For the local search step we develop a nested variable neighborhood descent strategy. The proposed approach is tested on benchmark instances from…

Optimization Letters, 2017, 11 (2), pp.377-388. ⟨10.1007/s11590-016-1004-x⟩. ⟨hal-03402503⟩