Publications

• Article dans une revue

Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling

Mahmoud Charmiyan, Ahmed-Reza Azimian, Laurent Keirsbulck, Ebrahim Shirani, Fethi Aloui

A 3D numerical simulation using large eddy simulation (LES) method is performed for a submerged turbulent water slot jet impinging normally on a flat plate with a nozzle-to-plate distance of 10 jet width and a Reynolds number of 16000 and the results are compared with the existing experimental data…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.11-17. ⟨10.36884/jafm.9.SI1.25825⟩. ⟨hal-03448221⟩

• Chapitre d'ouvrage

Measurements of dynamic properties of ballistic yarns using innovative testing devices

Caroline Chevalier, Christophe Kerisit, Andreas Klavzar, François Boussu, Daniel Coutellier

This chapter highlights the influence of the dynamic characteristic of yarn on the ballistic performance of fabric submitted to impact. A brief review of existing research works done on the dynamic tensile test known as the Hopkinson bar, and more recently the Split Flying Bar, is presented. A new…

Advanced Fibrous Composite Materials for Ballistic Protection, Elsevier, pp.199-215, 2016, 978-178242461-1. ⟨10.1016/B978-1-78242-461-1.00007-8⟩. ⟨hal-03667392⟩

• Article dans une revue

Experimental Investigations on Oscillatory Couette Taylor Flow Wall Shear Stress Behavior using Electrochemical Technique: Low Modulation Effect

Emna Berrich, Fethi Aloui, Jack M Legrand

In the simplest and original case of study of the Taylor–Couette TC problems, the fluid is contained between a fixed outer cylinder and a concentric inner cylinder which rotates at constant angular velocity. Much of the works done has been concerned on steady rotating cylinder(s) i.e. rotating…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.147-154. ⟨10.36884/jafm.9.SI1.26163⟩. ⟨hal-02545268⟩

• Article dans une revue

Local stability of discrete-time TS fuzzy systems

Zsofia Lendek, Jimmy Lauber

This paper considers local stability analysis of discrete-time Takagi-Sugeno fuzzy systems, for which classically in the TS literature only global stability is considered. Using a common quadratic and nonquadratic Lyapunov function, respectively, LMI conditions are developed to establish local…

IFAC-PapersOnLine, 2016, 49 (5), pp.7-12. ⟨10.1016/j.ifacol.2016.07.081⟩. ⟨hal-03669983⟩

• Communication dans un congrès

A thermal study of power cables cooling in tunnels

Fahd Boukrouche, Christophe Moreau, Souad Harmand, François Beaubert, Julien Pellé, Olivier Moreau

Power transmission through power cables installed in ventilated tunnels has been increasingly used worldwide and offers a complex thermal environment. Established correlations currently in use have been deduced from a non-fully developed turbulent flow. This paper details the experimental…

7th European Thermal-Sciences Conference (Eurotherm2016), Jun 2016, Cracovie, Poland. pp.032032, ⟨10.1088/1742-6596/745/3/032032⟩. ⟨hal-03439268⟩

• Communication dans un congrès

Dossier Intelligence Artificielle et Transport.

Flavien Balbo, René Mandiau

Bulletin de l'AFIA, Jan 2016, Virtual Event, France. pp.14-17. ⟨hal-03396024⟩

• Communication dans un congrès

Towards a context based Evaluation Support System for Quality in Use assessment of mobile systems

Emna Ben Ayed, Rim Magdich, Christophe Kolski, Houcine Ezzedine

Mobile applications, which introduce a new style of interaction between the final user and the mobile systems, are used in different contexts of use. So, a context based evaluation of the Quality in Use (QinU) of such systems becomes required. In this work, we present a method towards supporting…

IEEE International Conference on Systems, Man and Cybernetics (SMC 2016), Institute of Electrical and Electronics Engineers (IEEE), Oct 2016, Budapest, Hungary. pp.4350-4355, ⟨10.1109/SMC.2016.7844915⟩. ⟨hal-03350098⟩

• Proceedings/Recueil des communications

Service Orientation in Holonic and Multi-agent Manufacturing

Theodor Borangiu, Damien Trentesaux, André Thomas, Duncan Mcfarlane

Of interest are recent advances and on-going research in holonic and agent-based systems for manufacturing. Industrials are seeking for models and solutions that are not only able to provide efficient overall production performance, but also to face reactively a growing set of unpredicted events.…

2016, Service Orientation in Holonic and Multi-agent Manufacturing, 978-3-319-30335-2. ⟨10.1007/978-3-319-30337-6⟩. ⟨hal-01425754⟩

• Article dans une revue

Robust speaker identification system over AWGN channel using improved features extraction and efficient SAD algorithm with prior SNR estimation

Riadh Ajgou, Salim Sbaa, Said Ghendir, Ali Chemsa, Abdelmalik Taleb-Ahmed

This paper motivates the combination of Autoregressive (AR) parameters and Mel Frequency Cepstral Coefficients (MFCC) features for remote robust text-independent speaker identification. All speaker identification techniques start by converting the raw speech signal into a sequence of acoustic…

International Journal of Circuits, Systems and Signal Processing, 2016, 10, pp.108-118. ⟨hal-03664850⟩

• Communication dans un congrès

The ConWip Production Control System: a Literature Review

Yann Jaegler, Patrick Burlat, Samir Lamouri

A growing body of literature dealing with ConWip has been observed during the past decade. Considering the current industrial challenges characterized by adaptability, product customization, shortened lead times and customer satisfaction, ConWip appears to be an effective and adapted production…

The International Conference on Information Systems, Logistics and Supply Chain (ILS International Conference) , KEDGE Business School in Bordeaux, Jun 2016, Bordeaux France. ⟨hal-01350666⟩