Publications

• Article dans une revue

Unified Driver Model simulation and its application to the automotive, rail and maritime domains

Pietro Carlo Cacciabue, Simon Enjalbert, Håkan Söderberg, Andreas Tapani

This paper describes the implementation of a model of a driver into a computerised numerical simulation. The model is developed to capture the essential characteristics and common aspects of cognition and behaviour of a human being in control of a “vehicle” in different surface transport systems,…

Transportation Research Part F: Traffic Psychology and Behaviour, 2013, 21, pp.315-327. ⟨10.1016/j.trf.2013.09.020⟩. ⟨hal-03509701⟩

• Article dans une revue

A three-dimensional study of electronic component cooling using a flat heat pipe

Hamdy Hassan, Souad Harmand

In this article, a three-dimensional thermal and hydrodynamic numerical model using a flat heat pipe (vapor chamber) is proposed for cooling of electronic components. The heat pipe is composed of a vapor region sandwiched between two wick regions, which are covered by two flat copper plates. A…

Heat Transfer Engineering, 2013, 34 (7), pp.596-607. ⟨10.1080/01457632.2013.730426⟩. ⟨hal-03531174⟩

• Article dans une revue

A comprehensive blank development method for forming sheet metal parts

Jianjun Wu, Xin Wu, Liangcai Deng, Hakim Naceur

For some shortcomings in the use of standard radial length development in the blank development for forming sheet metal parts, an improved radial length normal spreading approach considering outside normal direction is developed to resolve blank development in sheet metal forming. Moreover, a…

International Journal of Advanced Manufacturing Technology, 2013, 13 (1), pp. 1-13. ⟨10.1007/s00170-013-5502-z⟩. ⟨hal-03520429⟩

• Communication dans un congrès

Alternative Action Plan Generator (A2PG) for elaboration an anticipated feedback

Wided Ben Yahia, Nicolas Tricot, Philippe Polet, Frédéric Vanderhaegen

This paper proposes an original Alternative Action Plan Generator – A2PG, which predicts possible alternatives of the human action plans in which the human operators do not respect the safety rules. These alternatives build an anticipated feedback. Five parameters characterize A2PG. The creation of…

12th IFAC Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, Aug 2013, Las Vegas, Nevada, United States. pp.296-303, ⟨10.3182/20130811-5-US-2037.00069⟩. ⟨hal-03612502⟩

• Article dans une revue

Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle

Marie Creyx, Eric Delacourt, Céline Morin, Bernard Desmet, Philippe Peultier

The micro combined heat and electrical power systems (micro-CHP) with hot air engines are well adapted for solid biomass upgrading, in particular, the Ericsson engines working with an open cycle and an external combustion. This paper presents a model of an Ericsson engine with a compression and an…

Energy, 2013, 49 (1), pp. 229-239. ⟨10.1016/j.energy.2012.10.061⟩. ⟨hal-03531364⟩

• Article dans une revue

Assessment of ship maneuverability by using a coupling between a nonlinear transient ship maneuvering model and mathematical programming techniques

T. Tran Khanh, Abdellatif Ouahsine, Hakim Naceur, Karima El Wassifi

In this paper, a numerical method based on a coupling between a mathematical model of nonlinear transient ship manoeuvring motion in the horizontal plane and Mathematical Programming (MP) techniques is proposed. The aim of the proposed procedure is an efficient estimation of optimal ship…

Journal of Hydrodynamics, 2013, 25 (5), pp.788-804. ⟨10.1016/S1001-6058(13)60426-6⟩. ⟨hal-03629803⟩

• Article dans une revue

Introduction

Yacine Bellik, Christophe Kolski

Depuis quelques années, linformatique a commencé à envahir des espaces de plus en plus larges de notre environnement quotidien. Elle sest très vite répandue dans des objets qui en étaient quasiment dépourvus (lave-linge, appareils photos, téléphones, autoradios, etc.). La recherche porte aujourdhui…

Revue des Sciences et Technologies de l'Information - Série TSI : Technique et Science Informatiques, 2013, 32, pp.543-545. ⟨hal-01836653⟩

• Ouvrages

Social, Localisation et Mobilité : de nouveaux enjeux pour la gestion des données

Florence Sèdes, Thierry Delot

Sèdes, Florence; Delot, Thierry. Hermès Science, Numéro spécial (18 : 1), 2013, Ingénierie des Systèmes d'Information (ISI), ISSN 1633-1311. ⟨hal-03761353⟩

• Article dans une revue

Roughness signature of tribological contact calculated by a new method of peaks curvature radius estimation on fractal surfaces

Maxence Bigerelle, Jean-Marie Nianga, Denis Najjar, Alain Iost, Cédric Hubert, K. J. Kubiak

This paper proposes a new method of roughness peaks curvature radii calculation and its application to tribological contact analysis as characteristic signature of tribological contact. This method is introduced via the classical approach of the calculation of radius of asperity. In fact, the…

Tribology International, 2013, 65 (65), pp.235-247. ⟨10.1016/j.triboint.2013.03.017⟩. ⟨hal-01065878⟩

• Article dans une revue

Plastic deformation of structural steels under hot-working conditions

Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Damien Barbier, Mirentxu Dubar, Jacky Lesage

The present study has been conducted in order to formulate a rational description of the flow stress of structural steels, when these are deformed in tension under hot-working conditions. The simplified formulation that has been developed only involves the analysis of the positive work-hardening…

Materials Science and Engineering: A, 2013, 559, pp.268-275. ⟨10.1016/j.msea.2012.08.097⟩. ⟨hal-00742740⟩