Publications

• Communication dans un congrès

Infused textured polymer surface withstands harsh environment

Anne-Sophie Vaillard, Manon Saget, Flavie Braud, Maude Jimenez, Marc Lippert, Laurent Keirsbulck, Yannick Coffinier, V. Thomy

This study focuses on developing environmentally friendly, transparent, and anti-adhesive coatings named Slippery Liquid Infused Porous Surfaces (SLIPS), inspired by the carnivorous plant Nepenthes. These coatings feature oil-infused micro/nano-textures that significantly reduce liquid adhesion…

The third international conference on nature inspired surface engineering (NISE 2024), American Institute of Sciences (AIS), Nov 2024, Granada (Spain), Spain. ⟨hal-04812002⟩

• Communication dans un congrès

A New Observer-Based Fault Tolerant Shared Control for SbW Systems with Actuator Fault for Driver Assistance

Mohammed Boudaoud, Chouki Sentouh, Cindy Cappelle, Maan El Najjar, Jean-Christophe Popieul

21st International Conference on Informatics in Control, Automation and Robotics, Nov 2024, Porto, Portugal. pp.189-197, ⟨10.5220/0013069800003822⟩. ⟨hal-04843697⟩

• Article dans une revue

Influence of thermo-hygrometric conditions on the interface bond in 3D printed concrete, Influence des conditions thermo-hygrométriques sur la liaison interfaciale dans le béton imprimé en 3D

M. Taleb, D. Bulteel, A. Montagne, F. Roudet, S. Rémond, Didier Chicot

For the additive manufacturing in civil engineering, the cementitious ink must have contradictory properties to be printable, indeed it must be initially fluid enough to be pumpable and extrudable, and also should stiffen quickly after deposition to be buildable. These can influence the mechanical…

Materials and structures, 2024, 57 (235), ⟨10.1617/s11527-024-02522-8⟩. ⟨hal-04790064⟩

• Article dans une revue

Wall pressure control of a 3D cavity with lateral apertures and wall proximity

Tarek Ammam, Laurent Keirsbulck, Jérémy Basley, Etienne Grappein, Sebastien Delprat, Tewfik Benazzouz, Denis Cornu, Marc Lippert, David Boussemart

<div><p>Flows over cavities are relevant to many branches of engineering and are known to be a source of instabilities, high pressure disturbances and large recirculating regions, leading to excessive pressure loads. In this paper, we studied the dynamical behavior of a 6.44 length-to-…

Experiments in Fluids, 2024, 65 (12), pp.177. ⟨10.1007/s00348-024-03900-2⟩. ⟨hal-04978805⟩

• Article dans une revue

Exploring the effect of layer thickness on the elastoplastic properties of the constituent materials of CrN/CrAlN multilayer coatings: a nanoindentation and finite element-based investigation

Yamen Ben Ammar, Khalil Aouadi, Aurélien Besnard, Alex Montagne, Corinne Nouveau, Faker Bouchoucha

This paper aims to assess the effect of layer thickness on the elastoplastic properties of the constituent materials of multilayer coating systems, as well as on the stress and strain fields in the vicinity of the coating/substrate interface. A methodology based on a trust-region reflective…

Thin Solid Films, 2024, 808, pp.140581. ⟨10.1016/j.tsf.2024.140581⟩. ⟨hal-04830868⟩

• Communication dans un congrès

Robust Haptic Shared Control Framework for Train Tele-driving Operation: Improving Safety and Efficiency

Zaid Cahya Dinul Haq, Chouki Sentouh, Estiko Rijanto, Jean-Christophe Popieul, Heru Taufiqurrohman

<div><p>This paper proposed a robust haptic shared control architecture in train tele-driving operations. The aim is to provide remote operators with an immersive and responsive interface, allowing them to monitor and control trains from a distance effectively. The purpose is to…

2nd International Conference on Innovations in Infrastructure - ICIIF 2024, IITRAM, Nov 2024, Ahmedabad, India. ⟨hal-05022502⟩

• Communication dans un congrès

Evaluation of Linear-Quadratic Optimal Control in Automatic Train Operation (ATO) during Unplanned Event

Zaid Cahya Dinul Haq, Chouki Sentouh, Estiko Rijanto, Jean-Christophe Popieul, Tsani Hendro Nugroho, Prasetyo Putranto

Automatic Train Operation (ATO) systems have become essential in urban rail networks with the aim of minimizing human error, improving punctuality, and optimizing energy consumption. However, unplanned incidents, such as post-automatic train protection (ATP) or driver interventions, reduce the…

2024 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET), Nov 2024, Bandung, Indonesia. pp.188-193, ⟨10.1109/ICRAMET62801.2024.10809209⟩. ⟨hal-04887590⟩

• Article dans une revue

30‐Minute infusion of isatuximab in patients with newly diagnosed multiple myeloma: Results of a Phase 1b study analysis

Enrique Ocio, Aurore Perrot, Philippe Moreau, Maria‐victoria Mateos, Sara Bringhen, Joaquín Martínez-López, Lionel Karlin, Song‐yau Wang, Corina Oprea, Yi Li, Ercem Kodas, Jesus San-Miguel

HemaSphere, 2024, 8 (11), ⟨10.1002/hem3.70041⟩. ⟨hal-04921037⟩

• Thèse

Characterisation and modelling of bonded and hybrid assemblies under crash loading, Caractérisation et modélisation du comportement en crash d'assemblages collés et hybrides

Fanny Damême

In automotive industry, the development of new vehicles must reconcile a number of requirements. In addition to improving safety and comfort, it is necessary to reduce costs and development phase while ensuring energy efficiency and environmental preservation. In this context, bonded assemblies are…, Dans l'industrie automobile, le développement de nouveaux véhicules doit concilier de nombreuses exigences. En plus d'une amélioration continue du confort et de la sécurité, les coûts et temps de développement doivent être réduits tout en assurant une efficacité énergétique et en…

Mechanics of materials [physics.class-ph]. Université Polytechnique Hauts-de-France; Institut national des sciences appliquées Hauts-de-France; Université norvégienne des sciences et de la technologie (Trondheim, Norvège), 2024. English. ⟨NNT : 2024UPHF0029⟩. ⟨tel-05017658⟩

• Article dans une revue

An improved Arbitrary Lagrangian–Eulerian thermal-fluid model by considering powder deposition effects on melting pool during Direct Energy Deposition processes

Yabo Jia, Loïc Jegou, Eric Feulvarch, Yassine Saadlaoui, Valérie Kaftandjian, Thomas Elguedj, Laurent Dubar, Jean-Michel Bergheau

Directed Energy Deposition (DED) has emerged notably by offering new possibilities for (re-)manufacturing parts. The multi-phase thermal-fluid models that simulate powder stream deposition are computationally too expensive. The mono-phase Arbitrary Lagrangian–Eulerian (ALE) method are limited in…

Additive Manufacturing, 2024, pp.104570. ⟨10.1016/j.addma.2024.104570⟩. ⟨hal-04812914⟩