Publications

• Article dans une revue

Specialized Reduced Models of Dynamic Flows in 2-Stroke Engines

Stéphanie Cagin, Xavier Fischer, Eric Delacourt, Nachida Bourabaa, Céline Morin, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

The complexity of scavenging by ports and its impact on engine efficiency create the need to understand and to model it as realistically as possible. However, there are few empirical scavenging models and these are highly specialized. In a design optimization process, they appear very restricted…

International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 2015, 9 (9), pp.1684 - 1693. ⟨10.5281/zenodo.1124187⟩. ⟨hal-01330965⟩

• Communication dans un congrès

A viscoelastic-viscoplastic model for short-fibre reinforced polymers with complex fibre orientations

Mariem Nciri, Delphine Notta-Cuvier, Franck Lauro, Fahmi Chaari, Bassem Zouari, Yamen Maalej

This paper presents an innovative approach for the modelling of viscous behaviour of short-fibre reinforced composites (SFRC) with complex distributions of fibre orientations and for a wide range of strain rates. As an alternative to more complex homogenisation methods, the model is based on an…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.04008, ⟨10.1051/epjconf/20159404008⟩. ⟨hal-03433232⟩

• Communication dans un congrès

Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint

Julien Carrier, Eric Markiewicz, Grégory Haugou, David Lebaillif, Nicolas Leconte, Hakim Naceur

Welded joints, due to their manufacturing process, are commonly weakened areas. This study analyses the dynamic behavior of the Base Metal (BM) and the Heat-Affected Zone (HAZ) of an HSS (High Strength Steel) fillet welded joint. Firstly, a specific approach has been developed to generate the HAZ…

CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-03446151⟩

• Ouvrages

Cyberdéfense La sécurité de l'informatique industrielle (domotique, industrie, transports)

Joffrey Clarhaut, Nicolas Dupoty, Franck Ebel, Jérôme Hennecart, Frédéric Vicogne

Ce livre sur la cyberdéfense s'adresse à toute personne sensibilisée au concept de la sécurité dans le domaine industriel. Il a pour objectif d'initier le lecteur aux techniques les plus courantes des attaquants pour lui apprendre comment se défendre. En effet, si la sécurité de l'…

E. N. I. Editions, 2015, 978-2-7460-9917-3. ⟨hal-03420348⟩

• Communication dans un congrès

Impact d'un sommet de côte et de ses aménagements sur le comportement et la réactivité cardiaque d'un conducteur à l'approche

Janick Naveteur, Jean Michel Auberlet, Julie Paxion, Florence Rosey, Françoise Anceaux, Marie-Pierre Pacaux-Lemoine

Questionnant la pertinence d'une approche psychophysiologique à l'analyse des situations, l'étude porte sur la conduite automobile. Centrée sur le franchissement de sommet de côte, elle est réalisée en simulateur, avec un parcours reproduisant le relief d'une route réelle. La…

8ème conférence de Psychologie Ergonomique (EPIQUE), Jul 2015, Aix en Provence, France. 12p. ⟨hal-01206186⟩

• Article dans une revue

Experimental study of oil cooling systems for electric motors

Tanguy Davin, Julien Pellé, Souad Harmand, Robert Yu

The present study focuses on the use of lubricating oil as a coolant for electrical motors. Oil is introduced at each side of a 40 kW test machine to directly cool the stator coil end-windings. An experimental setup has been implemented to test different oil injection patterns. The influence of the…

Applied Thermal Engineering, 2015, 75, pp.1-13. ⟨10.1016/j.applthermaleng.2014.10.060⟩. ⟨hal-03452082⟩

• Rapport

Comparaison de chaussures de running lors de la course chez l’enfant

Christophe Gillet, Franck Barbier

[Rapport de recherche] Rapport de contrat dans le cadre d'une convention de recherche passée avec la société OXYLANE, LAMIH, Valenciennes. 2015. ⟨hal-03463881⟩

• Article dans une revue

Supporting software process performance analysis through a knowledge-based environment

Natalia Chaves Lessa Schots, Taisa Guidini Gonçalves, Rodrigo Figueiredo Magalhaes, Ricardo de Holanda Busquet, Ana Regina Rocha, Gleison Santos, Káthia Marçal de Oliveira

Software process performance analysis is a challenge for software organizations that aim to achieve higher levels of maturity models and quality standards, as it usually depends on knowledge of quantitative and statistical techniques, and experience with software processes and in the organizational…

CLEI Electronic Journal., 2015, pp.1-12. ⟨10.1109/CLEI.2014.6965146⟩. ⟨hal-03401144⟩

• Communication dans un congrès

Separation of the elastic waves’ system in pre-stretched bar devices

Grégory Haugou, Nicolas Leconte, Hervé Morvan

The loading mode generated by Kolsky bars apparatus is limited due to physical reasons to a duration time of around 0.4ms. This is not suited in the characterization of high ductility metallic alloys up to fracture at moderate strain rates, since the duration time is too short. The pre-stretched…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01067, ⟨10.1051/epjconf/20159401067⟩. ⟨hal-03433273⟩

• Chapitre d'ouvrage

Friction Analysis in Bulk Metal Forming

Laurent Dubar, André Dubois, Mirentxu Dubar

A methodology to characterize friction according to the severe conditions of contact encountered in metal forming is presented. The main peculiarity of the proposed method is to use specimens and contactor made of industrial tool and workpiece surface in laboratory bench tests in order to ensure…

A. Erman Tekkaya; Alexander Brosius; Werner Homberg. 60 Excellent Inventions in Metal Forming, Springer Berlin Heidelberg, pp.23-28, 2015, 978-3-662-46312-3. ⟨10.1007/978-3-662-46312-3_4⟩. ⟨hal-03579559⟩