Publications

• Article dans une revue

Control Design for Soft Robots based on Reduced Order Model

Maxime Thieffry, Alexandre Kruszewski, Christian Duriez, Thierry-Marie Guerra

Inspired by nature, soft robots promise disruptive advances in robotics. Soft robots are naturally compliant and exhibit nonlinear behavior, which makes their study challenging. No unified framework exists to control these robots, especially when considering their dynamics. This work proposes a…

IEEE Robotics and Automation Letters, 2019, 4 (1), pp.25-32. ⟨10.1109/LRA.2018.2876734⟩. ⟨hal-01901031⟩

• Communication dans un congrès

Material behaviour at low temperatures for calibrating cryogenic machining numerical simulations

Rachele Bertolini, Stefania Bruschi, Andrea Ghiotti, Grégory Haugou, Hervé Morvan, Laurent Dubar

Recently, cryogenic machining of difficult-to-cut alloys has been adopted to increase tool life and improve the machined components surface integrity. Numerical models of cryogenic machining are being developed to evaluate the influence of the different process parameters. Up to now, their…

17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Jun 2019, Sheffield, United Kingdom. pp.344-349, ⟨10.1016/j.procir.2019.04.160⟩. ⟨hal-03679854⟩

• Article dans une revue

Adapted physical activity and cerebral palsy: A case study in educational boxing, Activité physique adaptée et infirmité motrice cérébrale: étude d'un cas clinique en boxe éducative

D. Maïga, Yves Kerlirzin, Laura Wallard

Science & Sports, 2019, 34 (2), pp.107-108. ⟨10.1016/j.scispo.2018.10.009⟩. ⟨hal-03651258⟩

• Article dans une revue

Instrumentation des décisions publiques - approche ontologique, Instrumentation of public policy decisions. Ontological approach

Michel Labour, Igor Crevits, Christophe Hemery

Un constat s’impose, le territoire est antérieur au numérique. Dès lors, la question se pose de l’apport spécifique du numérique au territoire et de la façon de le garantir. La matérialité du territoire, les différents usages qui en sont fait et la variété des situations qui s’y déroulent ne…, One observation is manifest : the territory predates the digital. This begs the question as to the contribution of the digital to a territory and the way it assures continuity. The materiality of the territory, the different uses and variety of occurring situations do not allow stopping at a…

Management des Technologies Organisationnelles (2014-..), 2019, 2 (9), pp.181-192. ⟨10.3917/mto.009.0181⟩. ⟨hal-03402254⟩

• Rapport

Volarela : étude comparative

Julian Alvarez, Romain Deledicq, Nicolas Fines, Christophe Kolski, Sophie Lepreux, G. Mallet

[Rapport de recherche] LAMIH, Université Polytechnique des Hauts-de-France; CrossQuest Studio; DeVisu; Serre Numérique; ESPE. 2019. ⟨hal-03388864⟩

• Article dans une revue

Analysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles

Younes Menni, Ahmed Azzi, Ali Chamkha, Souad Harmand

his computational fluid dynamic analysis attempts to simulate the incompressible steady fluid flow and heat transfer in a solar air channel with wall-mounted baffles. Two ꞌSꞌ-shaped baffles, having different orientations, i.e., ꞌSꞌ-upstream and ꞌSꞌ-downstream, were inserted into the channel and…

Journal of Applied and Computational Mechanics, 2019, 5 (2), pp.231-248. ⟨10.22055/jacm.2018.26023.1305⟩. ⟨hal-03612806⟩

• Article dans une revue

State estimation of rotary inverted pendulum using HOSM observers: Experimental results

F. A. Haouari, Quoc Viet Dang, J. y Jun, Mohamed Djemai, Brahim Cherki

This paper presents the observer design for the state estimation of the rotary inverted pendulum (RIP) system. A Takagi-Sugeno (T-S) fuzzy descriptor ap- proach is used for modeling the nonlinear dynamic system. Two higher-order sliding mode (HOSM) observers, based on the super-twisting algorithm,…

Nonlinear Dynamics and Systems Theory, 2019, 19 (3), pp.405-415. ⟨hal-03677981⟩

• Article dans une revue

Framework of models for selecting manufacturing processes and associated parameters for surface topographies

Benoit Rosa, Maxence Bigerelle, Antoine Brient, Serge Samper

Choosing appropriate manufacturing processes to create functional surfaces is a challenging issue for some industrials. A specific surface finish can be obtained by different manufacturing processes, each of them having a different economic impact. Currently, no tool could guarantee the surface…

Mechanics & Industry, 2019, 20 (3), ⟨10.1051/meca/2019011⟩. ⟨hal-02177519⟩

• Article dans une revue

Viscoelastic-viscoplastic model for short-fiber-reinforced composites with complex fibre orientation

Mariem Nciri, Delphine Notta-Cuvier, Franck Lauro, Fahmi Chaari, Yamen Maalej, B. Zouari

In this article, strain-rate sensitivity of short-fiber reinforced composites (SFRC) with complex fiber orientation is modeled. The principal aim is to allow an easier implementation than that of classical techniques, in case of complex reinforcement characteristics and nonlinear matrix behavior.…

Mechanics of Advanced Materials and Structures, 2019, 26 (10), pp.842-853. ⟨10.1080/15376494.2018.1430264⟩. ⟨hal-03629476⟩

• Article dans une revue

Simultaneous Estimation of State and Unknown Input with Hinfinity Guarantee on Error-Bounds for Fuzzy Descriptor Systems

Tran Anh-Tu Nguyen, Thierry-Marie Guerra, Victor Campos

This paper proposes a new l_infty observer design for fuzzy descriptor systems with unknown inputs. The descriptor form is treated using a singular redundancy system representation. To keep the consistency of the resulting fuzzy observer structure, we make use of a virtual variable playing the role…

IEEE Control Systems Letters, 2019, 3 (4), pp.1020-1025. ⟨10.1109/LCSYS.2019.2920768⟩. ⟨hal-03480286⟩