Publications

• Article dans une revue

Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle

Marie Creyx, Eric Delacourt, Céline Morin, Bernard Desmet, Philippe Peultier

The micro combined heat and electrical power systems (micro-CHP) with hot air engines are well adapted for solid biomass upgrading, in particular, the Ericsson engines working with an open cycle and an external combustion. This paper presents a model of an Ericsson engine with a compression and an…

Energy, 2013, 49 (1), pp. 229-239. ⟨10.1016/j.energy.2012.10.061⟩. ⟨hal-03531364⟩

• Article dans une revue

Assessment of ship maneuverability by using a coupling between a nonlinear transient ship maneuvering model and mathematical programming techniques

T. Tran Khanh, Abdellatif Ouahsine, Hakim Naceur, Karima El Wassifi

In this paper, a numerical method based on a coupling between a mathematical model of nonlinear transient ship manoeuvring motion in the horizontal plane and Mathematical Programming (MP) techniques is proposed. The aim of the proposed procedure is an efficient estimation of optimal ship…

Journal of Hydrodynamics, 2013, 25 (5), pp.788-804. ⟨10.1016/S1001-6058(13)60426-6⟩. ⟨hal-03629803⟩

• Communication dans un congrès

Application of a Co-evolutionary Genetic Algorithm to solve the Periodic Railway Timetabling Problem

Luis Diego Arenas Pimentel, Rémy Chevrier, Clarisse Dhaenens, Said Hanafi, Joaquin Rodriguez

In train operations, a timetable is used to establish the departure and arrival times for the trains at the stations or other relevant locations in the rail network or a subset of this network. The elaboration of a timetable responds to the commercial needs of the customers, for both passenger and…

IESM 2013, 5th international conference on industrial engineering and system management, Oct 2013, Rabat, Morocco. 10p. ⟨hal-00909588⟩

• Communication dans un congrès

Des Honeypots Mobiles Pour La Sécurité Proactive des Réseaux Ad Hoc Véhiculaires (VANETs)

Dhavy Gantsou, Patrick Sondi Obwang

Colloque international TELECOM’2013 & 8ème JFMMA, 2013, Marrakech, Maroc. ⟨hal-03577439⟩

• Article dans une revue

Liquid hydrocarbon fuels from fish oil industrial residues by catalytic cracking

Nadia Mrad, Maria Paraschiv, Fethi Aloui, Edwin Geo Varuvel, Mohand Tazerout, Sassi Ben Nasrallah

In the present work, catalytic cracking of fish oil industrial residue was investigated to study the effect of temperature, type of catalyst and the heating rate on the yield of organic liquid fraction (OLF) and its acid value. The highest bio-oil yield of 72% (wt.) was obtained at temperature…

International Journal of Energy Research, 2013, 37 (9), pp.1036-1043. ⟨10.1002/er.2906⟩. ⟨hal-00935904⟩

• Article dans une revue

Roughness signature of tribological contact calculated by a new method of peaks curvature radius estimation on fractal surfaces

Maxence Bigerelle, Jean-Marie Nianga, Denis Najjar, Alain Iost, Cédric Hubert, K. J. Kubiak

This paper proposes a new method of roughness peaks curvature radii calculation and its application to tribological contact analysis as characteristic signature of tribological contact. This method is introduced via the classical approach of the calculation of radius of asperity. In fact, the…

Tribology International, 2013, 65 (65), pp.235-247. ⟨10.1016/j.triboint.2013.03.017⟩. ⟨hal-01065878⟩

• Article dans une revue

A comprehensive blank development method for forming sheet metal parts

Jianjun Wu, Xin Wu, Liangcai Deng, Hakim Naceur

For some shortcomings in the use of standard radial length development in the blank development for forming sheet metal parts, an improved radial length normal spreading approach considering outside normal direction is developed to resolve blank development in sheet metal forming. Moreover, a…

International Journal of Advanced Manufacturing Technology, 2013, 13 (1), pp. 1-13. ⟨10.1007/s00170-013-5502-z⟩. ⟨hal-03520429⟩

• Chapitre d'ouvrage

Composites and Dynamic Failures: Experimental and Numerical Solving Strategies and Solutions

Daniel Coutellier

The constraints related to structures design in the field of transportation are increasingly complex in order to comply with safety standards. Composite materials being increasingly widespread within these structures, their behavior must therefore be more accurately mastered. Current numerical…

Serge Abrate; Bruno Castanié; Yapa D. S. Rajapakse. Dynamic Failure of Composite and Sandwich Structures, 192, pp.611-643, 2013, Solid Mechanics and Its Applications book series, ⟨10.1007/978-94-007-5329-7_14⟩. ⟨hal-01654040⟩

• Communication dans un congrès

Structural Self-organized Holonic Multi-Agent Manufacturing Systems

José Barbosa, Paulo Leitão, Emmanuel Adam, Damien Trentesaux

Worldwide systems are increasingly growing into unprecedented complexity levels. This increase of system complexity has to be tackled with new control approaches, where decentralization is playing an important role and particularly the Multi-Agent Systems and Holonic Systems. Despite the benefits…

6th International Conference on Industrial Applications of Holonic and Multi-Agent Systems (HoloMAS 2013), Aug 2013, Prague, Czech Republic. pp.59-70, ⟨10.1007/978-3-642-40090-2_6⟩. ⟨hal-03467679⟩

• Communication dans un congrès

A User-Oriented Test environment based on User-Interface evaluation graphical controls

Selem Charfi, Abdelwaheb Trabelsi, Houcine Ezzedine, Christophe Kolski

Several user-oriented techniques have been proposed for Graphical User Interface evaluation. In this paper, we focus on User-Oriented Test concepts, advantages and related problems. Among the User-Oriented Test techniques, the electronic informer is a powerful technique for interactive system…

12th IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, Aug 2013, Las Vegas, United States. pp.494-504, ⟨10.3182/20130811-5-US-2037.00060⟩. ⟨hal-03384691⟩