Publications

• Article dans une revue

Study of the parameters and characteristics of flat heat pipe with nanofluids subjected to periodic heat load on its performance

Hamdy Hassan, Souad Harmand

A study is presented on the transient cooling of an electronic component by flat heat pipe (FHP) with nanofluid. The electronic component has periodic power output of maximum value 400 W and works for 12.8 s. The effects of Cu, CuO and Al2O3 nanoparticles on the heat pipe performance are…

International Journal of Thermal Sciences, 2015, 97, pp.126-142. ⟨10.1016/j.ijthermalsci.2015.06.009⟩. ⟨hal-03448546⟩

• Article dans une revue

Hardware resource utilization optimization in FPGA-based Heterogeneous MPSoC architectures

Bouthaina Dammak Masmoudi, Mouna Baklouti, Rachid Benmansour, Smail Niar, Mohamed Abid

Next generation FPGA circuits will allow the integration of dozens of hard and soft cores as well as dedicated accelerators in the same chip. These Heterogeneous Multiprocessor System-on-Chip (Ht-MPSoC) architectures will allow the design of very complex System-on-Chips (SoC) on a single FPGA chip…

Microprocessors and Microsystems: Embedded Hardware Design , 2015, 39 (8), pp.1108-1118. ⟨10.1016/j.micpro.2015.05.006⟩. ⟨hal-03401002⟩

• Communication dans un congrès

Conception d’un dispositif d’assistance au passage assis – debout pour personnes hémiplégiques

Benyamine Allouche, Antoine Dequidt, Laurent Vermeiren, O. Rémy-Néris, Pauline Hamon

GT Systèmes mécatroniques, Nov 2015, Nantes, France. ⟨hal-03421550⟩

• Article dans une revue

New heuristic for harmonic means clustering

Emilio Carrizosa, Abdulrahman Al-Guwaizani, Pierre Hansen, Nenad Mladenovic

It is well known that some local search heuristics for K-clustering problems, such as k-means heuristic for minimum sum-of-squares clustering occasionally stop at a solution with a smaller number of clusters than the desired number K. Such solutions are called degenerate. In this paper, we reveal…

Journal of Global Optimization, 2015, 63 (3), pp.427-443. ⟨10.1007/s10898-014-0175-1⟩. ⟨hal-03576833⟩

• Article dans une revue

Solving the planar p-median problem by variable neighborhood and concentric searches

Zvi Drezner, Jack Brimberg, Nenad Mladenovic, Said Salhi

Two new approaches for the solution of the p-median problem in the plane are proposed. One is a Variable Neighborhood Search and the other one is a concentric search. Both approaches are enhanced by a front-end procedure for finding good starting solutions and a decomposition heuristic acting as a…

Journal of Global Optimization, 2015, 63 (3), pp.501-514. ⟨10.1007/s10898-014-0183-1⟩. ⟨hal-03401536⟩

• Communication dans un congrès

Go-green ANEMONA: an intelligent manufacturing system’s engineering method that fosters sustainability

Adriana Giret, Damien Trentesaux

Global Cleaner Production & Sustainable Consumption Conference, Nov 2015, Barcelone, Spain. ⟨hal-03412432⟩

• Article dans une revue

Reactive control of overall power consumption in flexible manufacturing systems scheduling: A Potential Fields model

Cyrille Pach, Thierry Berger, Yves Sallez, Damien Trentesaux

In recent years, designing “energy-aware manufacturing scheduling and control systems” has become more and more complex due to the increasing volatility and unpredictability of energy availability, supply and cost, and thus requires the integration of highly reactive behavior in control laws. The…

Control Engineering Practice, 2015, 44, pp.193-208. ⟨10.1016/j.conengprac.2015.08.003⟩. ⟨hal-03428162⟩

• Article dans une revue

Customizing VLIW processors from dynamically profiled execution traces

Gorker Alp Malazgirt, Arda Yurdakul, Smail Niar

The design philosophy of VLIW processors is to maximize instruction level parallelism (ILP) starting from compiler and machine code level to all the way down to memory and computational blocks. For this purpose, VLIW tailoring has been an important research area, because non-tailored VLIWs cannot…

Microprocessors and Microsystems: Embedded Hardware Design , 2015, 39 (8), pp.656-673. ⟨10.1016/j.micpro.2015.09.005⟩. ⟨hal-03400990⟩

• Article dans une revue

Enhanced precision of ankle torque measure with an open-unit dynamometer mounted with a 3D force-torque sensor

Anis Toumi, Sebastien Leteneur, Christophe Gillet, Jean-François Debril, Nicolas Decoufour, Franck Barbier, Jennifer Jakobi, Emilie Simoneau-Buessinger

Purpose: Many studies have focused on maximum torque exerted by ankle joint muscles during plantar flexion. While strength parameters are typically measured with isokinetic or isolated ankle dynamometers, these devices often present substantial limitations for the measurement of torque because they…

European Journal of Applied Physiology, 2015, 115 (11), pp.2303-2310. ⟨10.1007/s00421-015-3210-0⟩. ⟨hal-03520701⟩

• Article dans une revue

Review on Numerical Modeling of Instrumented Indentation Tests for Elastoplastic Material Behavior Identification

Julie Marteau, Salima Bouvier, Maxence Bigerelle

The impacts of the parameters controlling the finite element simulation of instrumented indentation tests and their consequences on numerical results are reviewed in case of homogeneous materials and functionally graded ones. Through a comparative study of the results of different finite element…

Archives of Computational Methods in Engineering, 2015, 22 (4), pp.577-593. ⟨10.1007/s11831-014-9134-8⟩. ⟨hal-02909095⟩