Publications

• Article dans une revue

Experimental study of oil cooling systems for electric motors

Tanguy Davin, Julien Pellé, Souad Harmand, Robert Yu

The present study focuses on the use of lubricating oil as a coolant for electrical motors. Oil is introduced at each side of a 40 kW test machine to directly cool the stator coil end-windings. An experimental setup has been implemented to test different oil injection patterns. The influence of the…

Applied Thermal Engineering, 2015, 75, pp.1-13. ⟨10.1016/j.applthermaleng.2014.10.060⟩. ⟨hal-03452082⟩

• Communication dans un congrès

Harmonized methodology for Safety Integrity Level allocation in a generic TCMS application

Kiswendsida Abel Ouedraogo, Julie Beugin, El Miloudi El Koursi, Joffrey Clarhaut, Dominique Renaux, Frédéric Lisiecki

This article presents a generic methodology for SIL allocation to railway rolling stock safety-related func-tions to solve the SIL concept application issues. This methodology is based on the flowchart formalism al-ready used in CSM European regulation. It starts with the use of quantitative safety…

ESREL 2015 - European safety and reliability conference, Sep 2015, Zürich, Switzerland. pp.3579-3587. ⟨hal-01471416⟩

• Article dans une revue

Supporting software process performance analysis through a knowledge-based environment

Natalia Chaves Lessa Schots, Taisa Guidini Gonçalves, Rodrigo Figueiredo Magalhaes, Ricardo de Holanda Busquet, Ana Regina Rocha, Gleison Santos, Káthia Marçal de Oliveira

Software process performance analysis is a challenge for software organizations that aim to achieve higher levels of maturity models and quality standards, as it usually depends on knowledge of quantitative and statistical techniques, and experience with software processes and in the organizational…

CLEI Electronic Journal., 2015, pp.1-12. ⟨10.1109/CLEI.2014.6965146⟩. ⟨hal-03401144⟩

• Communication dans un congrès

Separation of the elastic waves’ system in pre-stretched bar devices

Grégory Haugou, Nicolas Leconte, Hervé Morvan

The loading mode generated by Kolsky bars apparatus is limited due to physical reasons to a duration time of around 0.4ms. This is not suited in the characterization of high ductility metallic alloys up to fracture at moderate strain rates, since the duration time is too short. The pre-stretched…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01067, ⟨10.1051/epjconf/20159401067⟩. ⟨hal-03433273⟩

• Proceedings/Recueil des communications

Proceedings of 4th International Conference on Advanced Logistics and Transport

Mourad Abed, Mounir Benaissa

ICALT'2015, May 2015, Valenciennes, France. 2015. ⟨hal-03402368⟩

• Article dans une revue

A2PG: alternative action plan generator

Wided Ben Yahia, Frédéric Vanderhaegen, Philippe Polet, Nicolas Tricot

This study concerns the safety analysis of human-machine systems. Accidents are mainly caused by human operators' failure in complying with the equipment's safety rules. The aim of safety analysis was to evaluate the potential risks of a system. This analysis is usually based on a…

Cognition, Technology and Work, 2015, 17, pp.95-109. ⟨10.1007/s10111-014-0287-x⟩. ⟨hal-02600865⟩

• Article dans une revue

Variable and single neighbourhood diving for MIP feasibility

Jasmina Lazic, Raca Todosijević, Said Hanafi, Nenad Mladenovic

In this paper, we propose two new diving heuristics for finding a feasible solution for a mixed integer programming problem, called variable neighbourhood (VN) diving and single neighbourhood (SN) diving, respectively. They perform systematic hard variable fixing (i.e. diving) by exploiting the…

Yugoslav Journal of Operations Research, 2015, 25 (2), pp.131-157. ⟨10.2298/YJOR140417027L⟩. ⟨hal-03402053⟩

• Article dans une revue

Local versus global optimal sports techniques in a group of athletes

Aurore Huchez, Diane Haering, Patrice Holvoët, Franck Barbier, Mickael Begon

Various optimization algorithms have been used to achieve optimal control of sports movements. Nevertheless, no local or global optimization algorithm could be the most effective for solving all optimal control problems. This study aims at comparing local and global optimal solutions in a…

Computer Methods in Biomechanics and Biomedical Engineering, 2015, 18 (8), pp.829-838. ⟨10.1080/10255842.2013.849341⟩. ⟨hal-03464928⟩

• Communication dans un congrès

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin, Nachida Bourabaa, Eric Delacourt, Céline Morin, Xavier Fischer, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents a method to improve cylinder design of 2-stroke auto-ignition engine based on a CFD (Computational Fluid Dynamics) study of internal flows in the chamber and an unsteady global 0D parametric approach. In 2-stroke engine, scavenging process plays an important role regarding…

7th International Exergy, Energy and Environment Symposium (IEEES-7), Apr 2015, Valenciennes, France. ⟨10.36884/jafm.9.SI1.26397⟩. ⟨hal-01331189⟩

• Communication dans un congrès

Failure stress criterion for adhesively bonded joint at different strain rates by using dynamic Arcan test device

Ludovic Dufour, Benjamin Bourel, Franck Lauro, Grégory Haugou, Nicolas Leconte, Nicolas Carrere

The purpose of this work is to determine the failure criterion evolution of assembly bonded with a strain rate dependent adhesive. A new modified ARCAN device is then designed to obtain the average stress at failure under different loading angles and for strain up to 350 s −1. Tests are performed…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01024, ⟨10.1051/epjconf/20159401024⟩. ⟨hal-03433146⟩