Publications

• Article dans une revue

Assessment of dental implant stability using resonance frequency analysis and quantitative ultrasound methods

Yoann Hériveaux, Romain Vayron, Manon Fraulob, Hugues Albini Lomami, Camille Lenormand, Guillaume Haiat

Purpose Quantitative ultrasound (QUS) and resonance frequency analyses (RFA) are promising methods to assess the stability of dental implants. The aim of this in vivo preclinical study is to compare the results obtained with these two techniques with the bone-implant contact (BIC) ratio, which is…

Journal of Prosthodontic Research, 2021, 65 (3), pp.421-427. ⟨10.2186/JPR.JPR_D_20_00052⟩. ⟨hal-02990903⟩

• Article dans une revue

Kárpát-medencei nyersanyagokból készült kőeszközök felületi elváltozásainak kvalitatív és kvantitatív elemzése

Antony Borel, Raphaël Deltombe, Julie Marteau, Philippe Moreau, Maxence Bigerelle, György Lengyel, Zsolt Mester

Az őskori régészeti kőeszközökön végzett nyomelemzés célja, hogy jellemezzük a felületi elváltozásaikat, s ezen keresztül meghatározzuk az eszközök funkcióit és leírjuk az egykori emberek technikával kapcsolatos viselkedését. A módszer megbízhatósága és megismételhetősége körül vannak viták, s a…

Magyar Régészet, 2021, 10 (3), pp.1-12. ⟨10.36245/mr.2021.3.4⟩. ⟨hal-03621116⟩

• Article dans une revue

On the performance of a new mixed peridynamic beam model for the analysis of frame structures

Ruqing Bai, Hakim Naceur, Abdel Laksimi

International Journal of Mechanical Sciences, In press. ⟨hal-03442212⟩

• Article dans une revue

Impact of the lossy image compression on the biometric system accuracy: a case study of hand biometrics

Djamel Samai, Abdallah Meraoumia, Mouldi Bedda, Abdelmalik Taleb-Ahmed

Biometric recognition systems are used in several cases, to recognise people using images. Storing of large images require large storage space. To reduce the storage space, compression methods are employed. In this paper, we analyse the effect of lossy image compression on the performance of…

International Journal of Computer Aided Engineering and Technology, 2021, 14 (2), pp.168-188. ⟨10.1504/IJCAET.2021.113543⟩. ⟨hal-03717976⟩

• Article dans une revue

Novel solutions on model-based and model-free robotic-assisted ankle rehabilitation

Juan Carlos Arceo Luzanilla, Jorge Alvarez, Carlos Daniel Armenta Moreno, Jimmy Lauber, Sylvain Cremoux, Emilie Simoneau-Buessinger, Miguel Bernal

In this report, ankle rehabilitation routines currently approved by physicians are implemented via novel control algorithms on a recently appeared robotic device known as the motoBOTTE. The physician specifications for gait cycles are translated into robotic trajectories whose tracking is performed…

Archives of Control Sciences, 2021, 31 (1), pp.5-27. ⟨10.24425/acs.2021.136878⟩. ⟨hal-03426614⟩

• Article dans une revue

An attempt to generate mechanical white etching layer on rail surface on a new rolling contact test bench

Pierrick Merino, Sophie Cazottes, Vincent Lafile, Marion Risbet, Aurelien Saulot, Salima Bouvier, Julie Marteau, Yves Berthier

This study presents a successful attempt to reproduce White Etching Layer (WEL) under pure mechanical conditions, with the use of a new experimental test bench with tests conditions representative of the wheel-rail contact. The effect of the presence of a run-in or corrosive fuse layer at the rail…

Wear, 2021, 482, ⟨10.1016/j.wear.2021.203945⟩. ⟨hal-03484906⟩

• Communication dans un congrès

Effect of Attention Saturating and Cognitive Load on Tactile Texture Recognition for Mobile Surface

Adnane Guettaf, Yosra Rekik, Laurent Grisoni

We investigate users ability to recognize tactile textures on mobile surface when performing a primary task that either saturates the attention or is cognitively demanding. Our findings indicate that the attention saturating task decreases performance by 6.98% and increases frustration, mental…

18th IFIP Conference on Human-Computer Interaction (INTERACT), Aug 2021, Bari, Italy. pp.557-579, ⟨10.1007/978-3-030-85610-6_31⟩. ⟨hal-03379590⟩

• Chapitre d'ouvrage

Conduite des systèmes de production durables, Control of sustainable production systems

Olivier Sénéchal, Damien Trentesaux

La conduite des systèmes de production est une activité de pilotage. Faire face à une pandémie mondiale, à la raréfaction des ressources naturelles et au dérèglement climatique est un résultat auquel elle doit participer, même si elle relève du niveau opérationnel de la gestion industrielle. Dans…, The control of production systems is a management activity. Confronting a global pandemic, the scarcity of natural resources and climate change is a result to which it must contribute even if the control of production systems is relevant to the operational level of industrial engineering. In this…

Techniques de l'ingénieur, TECHNIQUES DE L'INGÉNIEUR, pp.S7598, 2021, ⟨10.51257/a-v2-s7598⟩. ⟨hal-03586735⟩

• Communication dans un congrès

Solving Facility Layout Problem with safety consideration of Reconfigurable Manufacturing and Assembly Systems

Mariem Besbes, Yassine Idel Mahjoub, Thérèse Bonte, Thierry Berger, Yves Sallez, Zolghadri Marc

Reconfigurable Manufacturing Systems (RMS) are designed to cope with mass customization problem. Reconfigurable Assembly Systems (RAS) are a variant of this RMS concept in the assembly field. One of the most crucial issues in designing the RAS is the layout problem with human safety considerations…

CIRP CMS, Sep 2021, Grece, France. pp.1942-1947, ⟨10.1016/j.procir.2021.11.328⟩. ⟨hal-03528808⟩

• Article dans une revue

Automated patch assessment for program repair at scale

He Ye, Matias Martinez, Martin Monperrus

In this paper, we do automatic correctness assessment for patches generated by program repair systems. We consider the human-written patch as ground truth oracle and randomly generate tests based on it, a technique proposed by Shamshiri et al., called Random testing with Ground Truth (RGT) in this…

Empirical Software Engineering, 2021, 26 (2), pp.20. ⟨10.1007/s10664-020-09920-w⟩. ⟨hal-03396298⟩