Publications

• Communication dans un congrès

Efficient Shell-based SPH model for the low-velocity impact and failure analysis of composite plates

Jun Lin, Hakim Naceur, Daniel Coutellier, Serge Abrate

Symposium on Dynamic Response and Failure of Composite Materials, DRaF2014, Sep 2014, Ischia, Italy. ⟨hal-03434351⟩

• Communication dans un congrès

Bond graph model of a flapping wing micro-air vehicle

Samuel Dupont, Sébastien Grondel, Alexandre Bontemps, Eric Cattan, Daniel Coutellier

Birds and insects demonstrate impressive aerial capacities in terms of hovering, backward flight or sudden acceleration and their diversity brings multiple solutions to design micro- and nano-air vehicles (MAV's and NAV's). To allow a remotely flight control of such vehicles, many…

IEEE/ASME 10th International Conference on Mechatronic and Embedded Systems and Applications (MESA 2014), Sep 2014, Senigallia, Italy. ⟨10.1109/MESA.2014.6935565⟩. ⟨hal-03552697⟩

• Communication dans un congrès

Real-time monitoring and diagnosis of a train door mechatronic system

Laurent Cauffriez, Sébastien Grondel

For train manufacturers, a technical, economical, and societal key issue is the real-time monitoring and diagnosis of a train door in new generation of urban trains. Therefore, this paper proposes to deal with the modeling and diagnosis of a train door mechatronic system. For this purpose, the…

2014 IEEE/ASME 10th International Conference on Mechatronic and Embedded Systems and Applications (MESA), Sep 2014, Senigallia, Italy. pp.1-6, ⟨10.1109/MESA.2014.6935525⟩. ⟨hal-03418781⟩

• Communication dans un congrès

Flow measurement using micro-PIV and related temperature distributions within evaporating sessile drops of self-rewetting mixtures of 1-pentanol and water

John R. Christy, Khellil Sefiane, Johan C. Ebeling, Tobias Seewald, Souad Harmand

Recently interest has arisen in the use of so-called self-rewetting mixtures for micro-scale heat transfer systems. Such fluids, in which the surface tension can increase with increasing temperature, are expected to offer superior evaporative cooling performance by extending the region of operation…

4th Micro and Nano Flows Conference, Sep 2014, Londres, United Kingdom. ⟨hal-03434396⟩

• Communication dans un congrès

A mixed integer linear programming approach for design space exploration in FPGA-based MPSoC

Bouthaina Dammak Masmoudi, Rachid Benmansour, Smail Niar, Mouna Baklouti, Mohamed Abid

Heterogeneous Multiprocessor System-on-Chip (Ht-MPSoC) architectures represent a promising approach as they allow a higher performance/energy consumption trade-off. In such systems, the processor instruction set is enhanced by application-specific custom instructions implemented on reconfigurable…

2014 24th International Conference on Field Programmable Logic and Applications (FPL), Sep 2014, Munich, Germany. pp.1-4, ⟨10.1109/FPL.2014.6927431⟩. ⟨hal-03663255⟩

• Communication dans un congrès

Application specific multi-port memory customization in FPGAs

Gorker Alp Malazgirt, Hasan Erdem Yantir, Arda Yurdakul, Smail Niar

FPGA block RAMs (BRAMs) offer speed advantages compared to LUT-based memory designs but a BRAM has only one read and one write port. Designers need to use multiple BRAMs in order to create multi-port memory structures which are more difficult than designing with LUT-based multiport memories. Multi-…

24th International Conference on Field Programmable Logic and Applications (FPL) 2014, Sep 2014, Munich, Germany. pp.1-4, ⟨10.1109/FPL.2014.6927426⟩. ⟨hal-03663490⟩

• Communication dans un congrès

Study of a Taylor-Couette-Poiseuille flow in an annular channel with a slotted rotor

Nicolas Lancial, Federico Torriano, François Beaubert, Souad Harmand, Gilles Rolland

This paper investigates a Taylor-Couette-Poiseuille flow in an annular channel of a slotted rotating inner cylinder, corresponding to a salient pole hydrogenerator. The purpose of this study is to improve the understanding of flow and thermal phenomena in electrical machines using a simplified…

2014 XXI International Conference on Electrical Machines (ICEM), Sep 2014, Berlin, Germany. pp.1422-1429, ⟨10.1109/ICELMACH.2014.6960368⟩. ⟨hal-03434422⟩

• Article dans une revue

New MIP model for multiprocessor scheduling problem with communication delays

Abdessamad Ait El Cadi, Rabie Ben Atitallah, Said Hanafi, Nenad Mladenovic, Abdelhakim Artiba

In this paper we consider scheduling tasks on a multiprocessor system, taking into account communication delays. We propose a new Mixed Integer Program (MIP) formulation that drastically reduces both the number of variables and the number of constraints, when compared to the best mathematical…

Optimization Letters, 2014, 11 (6), pp.1091-1107. ⟨10.1007/s11590-014-0802-2⟩. ⟨hal-01104613⟩

• Article dans une revue

Time Series Modelling and Forecasting of Emergency Department Overcrowding

Farid Kadri, Fouzi Harrou, Sondès Chaabane, Christian Tahon

Efficient management of patient flow (demand) in emergency departments (EDs) has become an urgent issue for many hospital administrations. Today, more and more attention is being paid to hospital management systems to optimally manage patient flow and to improve management strategies, efficiency…

Journal of Medical Systems, 2014, 38 (9), pp.107. ⟨10.1007/s10916-014-0107-0⟩. ⟨hal-03644578⟩

• Article dans une revue

Roughness characterization of the galling of metals

Cédric Hubert, Julie Marteau, Raphaël Deltombe, Y Chen, Maxence Bigerelle

Several kinds of tests exist to characterize the galling of metals, such as that specified in ASTM Standard G98. While the testing procedure is accurate and robust, the analysis of the specimenʼs surfaces (${\rm area}=1.2\;{\rm cm}$) for the determination of the critical pressure of galling remains…

Surface Topography: Metrology and Properties, 2014, 2 (3), pp.034002. ⟨10.1088/2051-672X/2/3/034002⟩. ⟨hal-02968722⟩