Publications

• Article dans une revue

Liquid hydrocarbon fuels from fish oil industrial residues by catalytic cracking

Nadia Mrad, Maria Paraschiv, Fethi Aloui, Edwin Geo Varuvel, Mohand Tazerout, Sassi Ben Nasrallah

In the present work, catalytic cracking of fish oil industrial residue was investigated to study the effect of temperature, type of catalyst and the heating rate on the yield of organic liquid fraction (OLF) and its acid value. The highest bio-oil yield of 72% (wt.) was obtained at temperature…

International Journal of Energy Research, 2013, 37 (9), pp.1036-1043. ⟨10.1002/er.2906⟩. ⟨hal-00935904⟩

• Communication dans un congrès

Sociotechnical systems resilience : a dissonance engineering point of view

Jean-René Ruault, Frédéric Vanderhaegen, Christophe Kolski

Resilience deals with the capacity to adjust itself face disturbing events, to cope with unforeseeable conditions. Resilience is based upon the dynamic process of "visual piloting". The gap between the specified task and the done activity generates dissonance between beliefs and…

12th IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, Aug 2013, Las Vegas, United States. pp.149-156, ⟨10.3182/20130811-5-US-2037.00042⟩. ⟨hal-03384711⟩

• Article dans une revue

Investigation of the performance of modified TCM scheme for the protection of SPIHT-based compressed images over fading channel

Mohamed Ben Aissa, Abdesselam Bassou, Mohammed Beladgham, Abdelmalik Taleb-Ahmed, Abdelmounaim Moulay Lakhdar

In this paper, a new variant of trellis-coded modulation with Ungerboeck-Gray mapping 'TCM-UGM' is presented for spectral efficiency of 2 bit/s/Hz. The performance of this encoding scheme is investigated over Rayleigh fading channel. The simulation result, using 16-state TCM-UGM encoder,…

International Review on Computers and Software (IRECOS), 2013, 8 (1), pp.271-276. ⟨hal-03507984⟩

• Article dans une revue

Unified Driver Model simulation and its application to the automotive, rail and maritime domains

Pietro Carlo Cacciabue, Simon Enjalbert, Håkan Söderberg, Andreas Tapani

This paper describes the implementation of a model of a driver into a computerised numerical simulation. The model is developed to capture the essential characteristics and common aspects of cognition and behaviour of a human being in control of a “vehicle” in different surface transport systems,…

Transportation Research Part F: Traffic Psychology and Behaviour, 2013, 21, pp.315-327. ⟨10.1016/j.trf.2013.09.020⟩. ⟨hal-03509701⟩

• Ouvrages

Computer Science and Ambient Intelligence

Gaëlle Calvary, Thierry Delot, Florence Sèdes, Jean-Yves Tigli

In recent years, Information and Communication Science and Technology have witnessed awesome advances thanks to the groundbreaking nature of new materials, calculation processes and data sources. 'Grey box' computers now only represent a small proportion of calculation resources and data…

Gaëlle Calvary; Thierry Delot; Florence Sedes; Jean-Yves Tigli. Wiley, 335 p., 2013, 978-1-84821-437-8. ⟨10.1002/9781118580974⟩. ⟨hal-00953365⟩

• Article dans une revue

Armouring solutions against high velocity impact using 2D laminates and 3D warp interlock composites

Benjamin Provost, François Boussu, Daniel Coutellier, Daniel Vallée, Fabien Rondot, Julien Nussbaum

Since the emergence of the first armoured vehicles on battlefields, armour shield was mainly centred on conventional metallic materials, widespread solutions nowadays. For a long time, weight reduction in armoured protection, which represents the largest part of the vehicle’s overall weight, has…

Journal of Industrial Textiles, 2013, ⟨10.1177/1528083713498914⟩. ⟨hal-03644392⟩

• Article dans une revue

Plastic deformation of structural steels under hot-working conditions

Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Damien Barbier, Mirentxu Dubar, Jacky Lesage

The present study has been conducted in order to formulate a rational description of the flow stress of structural steels, when these are deformed in tension under hot-working conditions. The simplified formulation that has been developed only involves the analysis of the positive work-hardening…

Materials Science and Engineering: A, 2013, 559, pp.268-275. ⟨10.1016/j.msea.2012.08.097⟩. ⟨hal-00742740⟩

• Ouvrages

Ergonomie des Systèmes Homme-machine

Patrick Millot

Patrick Millot. Hermès science publications. Lavoisier, 386 pp., 2013, 978-2-7462-3920-3. ⟨hal-03467984⟩

• Article dans une revue

Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle

Marie Creyx, Eric Delacourt, Céline Morin, Bernard Desmet, Philippe Peultier

The micro combined heat and electrical power systems (micro-CHP) with hot air engines are well adapted for solid biomass upgrading, in particular, the Ericsson engines working with an open cycle and an external combustion. This paper presents a model of an Ericsson engine with a compression and an…

Energy, 2013, 49 (1), pp. 229-239. ⟨10.1016/j.energy.2012.10.061⟩. ⟨hal-03531364⟩

• Article dans une revue

Roughness signature of tribological contact calculated by a new method of peaks curvature radius estimation on fractal surfaces

Maxence Bigerelle, Jean-Marie Nianga, Denis Najjar, Alain Iost, Cédric Hubert, K. J. Kubiak

This paper proposes a new method of roughness peaks curvature radii calculation and its application to tribological contact analysis as characteristic signature of tribological contact. This method is introduced via the classical approach of the calculation of radius of asperity. In fact, the…

Tribology International, 2013, 65 (65), pp.235-247. ⟨10.1016/j.triboint.2013.03.017⟩. ⟨hal-01065878⟩