Publications

• Article dans une revue

Friction analysis during deformation of steels under hot-working conditions

Ivan Serebriakov, Eli Saúl Puchi-Cabrera, Laurent Dubar, Philippe Moreau, Damien Méresse, José Gregorio La Barbera-Sosa

An original multiscale friction analysis is developed to characterize the interfacial friction phenomena during the hot forging contact conditions in the manufacture of wheels for the railway industry. Hot upsetting sliding tests and roll-on-disc tests are performed to reproduce tribological…

Tribology International, 2021, 158, pp.106928. ⟨10.1016/j.triboint.2021.106928⟩. ⟨hal-03445995⟩

• Ouvrages

Service Oriented, Holonic and Multi-Agent Manufacturing Systems for Industry of the Future

Damien Trentesaux, Theodor Borangiu, Paulo Leitão, José-Fernando Jimenez Gordillo, Jairo R. Montoya-Torres

This book approaches its subject matter by promoting concepts, methods and solutions for the digital transformation of manufacturing through service orientation in holonic and agent-based control with distributed intelligence. The scientific theme of the book concerns “Manufacturing as a Service”,…

Springer International Publishing, 987, 2021, Studies in Computational Intelligence, 978-3-030-80905-8. ⟨10.1007/978-3-030-80906-5⟩. ⟨hal-03403663⟩

• Rapport

Inclusion persons with disabilities to a public transport system: An integrative decision-aiding approach.

Danijela Đorić, Yan Cimon, Igor Crevits, Said Hanafi, Raca Todosijević

[Research Report] 2021-32, CIRRELT; LAMIH, Université Polytechnique des Hauts-de-France. 2021, pp.50. ⟨hal-03531130⟩

• Communication dans un congrès

A User-Centered Approach to Adapt the Human-Machine Cooperation Strategy in Autonomous Driving

Stéphanie Coeugnet, Franck Mars, Mercedes Bueno, Chouki Sentouh, Jean-Christophe Popieul, Arnaud Koustanai, Annie Pauzie, Hélène Tattegrain

Using an integrative user-centered approach, the research project aimed at designing and assessing an adaptive HMI to improve the safety and the quality of the take-over in a level-3 automated vehicle. Future autonomous driving users confirmed the need for the monitoring systems to improve safety…

21st Congress of the International Ergonomics Association (IEA 2021), Jun 2021, VANCOUVER, Canada. pp. 600-606, ⟨10.1007/978-3-030-74608-7_73⟩. ⟨hal-03228345⟩

• Article dans une revue

Assessment of dental implant stability using resonance frequency analysis and quantitative ultrasound methods

Yoann Hériveaux, Romain Vayron, Manon Fraulob, Hugues Albini Lomami, Camille Lenormand, Guillaume Haiat

Purpose Quantitative ultrasound (QUS) and resonance frequency analyses (RFA) are promising methods to assess the stability of dental implants. The aim of this in vivo preclinical study is to compare the results obtained with these two techniques with the bone-implant contact (BIC) ratio, which is…

Journal of Prosthodontic Research, 2021, 65 (3), pp.421-427. ⟨10.2186/JPR.JPR_D_20_00052⟩. ⟨hal-02990903⟩

• Article dans une revue

On the performance of a new mixed peridynamic beam model for the analysis of frame structures

Ruqing Bai, Hakim Naceur, Abdel Laksimi

International Journal of Mechanical Sciences, In press. ⟨hal-03442212⟩

• Article dans une revue

Kárpát-medencei nyersanyagokból készült kőeszközök felületi elváltozásainak kvalitatív és kvantitatív elemzése

Antony Borel, Raphaël Deltombe, Julie Marteau, Philippe Moreau, Maxence Bigerelle, György Lengyel, Zsolt Mester

Az őskori régészeti kőeszközökön végzett nyomelemzés célja, hogy jellemezzük a felületi elváltozásaikat, s ezen keresztül meghatározzuk az eszközök funkcióit és leírjuk az egykori emberek technikával kapcsolatos viselkedését. A módszer megbízhatósága és megismételhetősége körül vannak viták, s a…

Magyar Régészet, 2021, 10 (3), pp.1-12. ⟨10.36245/mr.2021.3.4⟩. ⟨hal-03621116⟩

• Article dans une revue

Introducing coordination in hand position analysis during a steering wheel-based tracking task using fuzzy sets

Pierre Loslever, Jessica Schiro, François Gabrielli, Philippe Pudlo

This paper describes a new approach to analyse the way both hands are placed in relation to the steering wheel. The study is based on a 2D-tracking task, in which the stimulus is a steering wheel angle signal recorded while driving on 7 road geometries in real situations at 30 km/h. Hand movements…

Theoretical Issues in Ergonomics Science, 2021, pp.1-25. ⟨10.1080/1463922X.2021.1983886⟩. ⟨hal-03426319⟩

• Article dans une revue

Impact of the lossy image compression on the biometric system accuracy: a case study of hand biometrics

Djamel Samai, Abdallah Meraoumia, Mouldi Bedda, Abdelmalik Taleb-Ahmed

Biometric recognition systems are used in several cases, to recognise people using images. Storing of large images require large storage space. To reduce the storage space, compression methods are employed. In this paper, we analyse the effect of lossy image compression on the performance of…

International Journal of Computer Aided Engineering and Technology, 2021, 14 (2), pp.168-188. ⟨10.1504/IJCAET.2021.113543⟩. ⟨hal-03717976⟩

• Article dans une revue

An attempt to generate mechanical white etching layer on rail surface on a new rolling contact test bench

Pierrick Merino, Sophie Cazottes, Vincent Lafile, Marion Risbet, Aurelien Saulot, Salima Bouvier, Julie Marteau, Yves Berthier

This study presents a successful attempt to reproduce White Etching Layer (WEL) under pure mechanical conditions, with the use of a new experimental test bench with tests conditions representative of the wheel-rail contact. The effect of the presence of a run-in or corrosive fuse layer at the rail…

Wear, 2021, 482, ⟨10.1016/j.wear.2021.203945⟩. ⟨hal-03484906⟩