Publications

Type of document

Keywords

Author

Of

At

Affichage de 1831 à 1840 sur 5645

Article dans une revue

Personalised lane keeping assist strategy: adaptation to driving style

Jagat Jyoti Rath, Chouki Sentouh, Jean-Christophe Popieul

The research in advanced driver assistance systems (ADAS) has progressed to design architectures for driver specific performance. Personalised ADASs in this aspect have been developed with adaptation to driver attributes, state, style, behaviour, skill and so on. For the lane keeping task, the…

IET Control Theory and Applications, 2019, 13 (1), pp.106-115. ⟨10.1049/iet-cta.2018.5941⟩. ⟨hal-03644349⟩

Article dans une revue

De l'optimisation des opérations à l’alignement stratégique

Said Hanafi, Michel Labour, Igor Crevits

L’alignement stratégique repose sur les deux phases d’adaptation de la stratégie et d’intégration fonctionnelle au sein de l’organisation qui présentent une dimension décisionnelle importante. Les technologies de l’information offrent un pouvoir structurant à l’organisation mais également de…, Strategic alignment relies on both adaption of strategy and functional integration inside the organisation which refer to decisions. Information technologies allow improving the structure of the organisation and offer new opportunities which can extend to the market outside the organisation.…

Management des Technologies Organisationnelles (2014-..), 2019, 8, pp.87-99. ⟨hal-03402231⟩

Article dans une revue

Study of the phenomenon of the interaction between sessile drops during evaporation

Dorra Khilifi, Walid Foudhil, Kamel Fahem, Souad Harmand, Jabrallah Ben

This research work represents an experimental study of the interaction between water drops deposited on a substrate at ambient temperature. To examine this phenomenon, the evaporation of a single drop deposited on a substrate was first investigated. Then, several drops were deposited alongside on…

Thermal Science, 2019, 23 (2 Part B), pp.1105-1114. ⟨10.2298/tsci180406188k⟩. ⟨hal-03629591⟩

Article dans une revue

An alternative LMI static output feedback control design for nonlinear systems represented by Takagi-Sugeno models

Víctor Estrada Manzo, Zsofia Lendek, Thierry-Marie Guerra

This paper presents a static output feedback controller design for discrete-time nonlinear systems exactly represented by Takagi–Sugeno models. By introducing past states in the control law as well as in the Lyapunov function, more relaxed results are obtained. Different conditions in terms of…

ISA Transactions, 2019, 84, pp.104-110. ⟨10.1016/j.isatra.2018.08.025⟩. ⟨hal-03405375⟩

Article dans une revue

On the Local Stabilization of Hybrid Limit Cycles in Switched Affine Systems

Mohammed Benmiloud, A. Benalia, Mohamed Djemai, Michael Defoort

Most of the proposed controllers for switched affine systems are able to drive the system trajectory to a sufficiently small neighborhood of a desired state. However, the trajectory behavior in this neighborhood is not generally considered despite the fact that the system performance may be judged…

IEEE Transactions on Automatic Control, 2019, 64 (2), pp.841-846. ⟨10.1109/TAC.2018.2841806⟩. ⟨hal-03405319⟩

Ouvrages

Défis de l’automatisation des systèmes sociotechniques

Frédéric Vanderhaegen, Choubeila Maaoui, Mohamed Sallak, Denis Berdjag

Les défis de l’automatisation des systèmes sociotechniques sont fortement liés à la prise en compte des atouts et des limites des ressources techniques et humaines, tels que les caractéristiques perceptives, les capacités coopératives, les modalités de partage de tâches, la modélisation de…

Iste editions, 2019, 978-1-78405-539-4. ⟨hal-02457206⟩

Chapitre d'ouvrage

Some Advantages of Advanced Inverse Methods to Identify Viscoplastic and Damage Material Model Parameters

Bertrand Langrand, Delphine Notta-Cuvier, Thomas Fourest, Eric Markiewicz

The chapter aims at providing an overview of the research activities performed in the two past decades in the field of materials characterisation under dynamic loadings (i.e. from 10-3/s to 10+3/s for structural crashworthiness and impact applications) and identification of parameters of…

Dynamic Damage and Fragmentation, 5, pp.177-211, 2019. ⟨hal-02132586⟩

Communication dans un congrès

Optimization of an image-based experimental setup for the dynamic behaviour characterization of materials

Pascal Bouda, Delphine Notta-Cuvier, Bertrand Langrand, Eric Markiewicz, Fabrice Pierron

The present work aims at identifying an elastic-viscoplastic material constitutive model over a wide strain and strain-rate range (up to 0.1 and 1000 s−1 respectively), using the so-called Virtual Fields Method. To define the experimental campaign, a design process has been set. It relies on the…

2018 Annual Conference on Experimental and Applied Mechanics, Jun 2018, Greenville, United States. pp.153-155, ⟨10.1007/978-3-319-95089-1_28⟩. ⟨hal-03579457⟩

Article dans une revue

Framework of models for selecting manufacturing processes and associated parameters for surface topographies

Benoit Rosa, Maxence Bigerelle, Antoine Brient, Serge Samper

Choosing appropriate manufacturing processes to create functional surfaces is a challenging issue for some industrials. A specific surface finish can be obtained by different manufacturing processes, each of them having a different economic impact. Currently, no tool could guarantee the surface…

Mechanics & Industry, 2019, 20 (3), ⟨10.1051/meca/2019011⟩. ⟨hal-02177519⟩

Article dans une revue

Model free active flow control of a simplified car model

Baptiste Plumejeau, Sebastien Delprat, Laurent Keirsbulck

A model free control (MFC) approach is presented and used to symmetrize the unstable wake flow of a simplified car model named Ahmed body. Such unstable phenomena with regards to the space-time evolution of the low pressure wake vortex core, is known to increase the global drag of square back…

IFAC-PapersOnLine, 2019, 52 (5), pp.115-120. ⟨10.1016/j.ifacol.2019.09.019⟩. ⟨hal-03679783⟩