Publications

• Article dans une revue

Active Control of Nonlinear Suspension System Using Modified Adaptive Supertwisting Controller

Jagat Jyoti Rath, Kalyana Chakravarthy Veluvolu, Michael Defoort

The suspension system is faced with nonlinearities from the spring, damper, and external excitations from the road surface. The objective of any control action provided to the suspension is to improve ride comfort while ensuring road holding for the vehicle. In this work, a robust higher order…

Discrete Dynamics in Nature and Society, 2015, 2015, pp.408623. ⟨10.1155/2015/408623⟩. ⟨hal-03428495⟩

• Communication dans un congrès

On the study of human reliability in transportation systems of systems

Subeer Rangra, Walter Schön, Mohamed Sallak, Frédéric Vanderhaegen

Humans are and will remain one of the critical constituents of a technological system. The study of Human Factors is a broad domain with equally varying applications. Quantification thereof, with a Human Reliability Analysis (HRA) poses considerable challenges and advantages. In increasingly…

10th IEEE System of Systems Engineering Conference (SoSE 2015), May 2015, San Antonio, TX, United States. pp.208-213, ⟨10.1109/SYSOSE.2015.7151980⟩. ⟨hal-01266811⟩

• Communication dans un congrès

Observability and Observer Design of Partially Observed Petri Nets

Fayssal Arichi, Petreczky Mihaly, Mohamed Djemai, Brahim Cherki

This paper investigates observability and observer design of partially observed Petri nets (POPN). By using methods for descriptor systems, two major contributions are presented. First, a novel algebraic condition for POPN observability is presented. Second, an asymptotic observer is constructed…

5th IFAC Conference on Analysis and Design of Hybrid Systems, Oct 2015, Atlanta, United States. pp.27-32, ⟨10.1016/j.ifacol.2015.11.148⟩. ⟨hal-03413837⟩

• Rapport

Critères d’évaluation de la performance des sièges

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2015. ⟨hal-03420757⟩

• Article dans une revue

Evaluating User Interface Adaptation using the Context of Use

Makram Soui, Khaled Ghedira, Mourad Abed

The aim of adaptive user interface is to provide different layouts and relevant information according to the current context-of-use (users, platforms and environments). Today, these systems are indispensable to those who want to retrieve appropriate information with less effort at anytime and…

International Journal of Adaptive, Resilient and Autonomic Systems , 2015, 6 (1), pp.1-24. ⟨10.4018/IJARAS.2015010101⟩. ⟨hal-03401544⟩

• Communication dans un congrès

Impact d'un sommet de côte et de ses aménagements sur le comportement et la réactivité cardiaque d'un conducteur à l'approche

Janick Naveteur, Jean Michel Auberlet, Julie Paxion, Florence Rosey, Françoise Anceaux, Marie-Pierre Pacaux-Lemoine

Questionnant la pertinence d'une approche psychophysiologique à l'analyse des situations, l'étude porte sur la conduite automobile. Centrée sur le franchissement de sommet de côte, elle est réalisée en simulateur, avec un parcours reproduisant le relief d'une route réelle. La…

8ème conférence de Psychologie Ergonomique (EPIQUE), Jul 2015, Aix en Provence, France. 12p. ⟨hal-01206186⟩

• Communication dans un congrès

Dynamic recrystallization observed at the tool/chip interface in machining

Yannick Senecaut, Michel Watremez, Julien Brocail, Laurence Fouilland-Paille, Laurent Dubar

In numerical approaches for high speed machining, the rheological behavior of machined materials is usually described by a Johnson Cook law. However, studies have shown that dynamic recrystallization phenomena appear during machining in the tool/chip interface. The Johnson Cook constitutive law…

ESAFORM 2015, Apr 2015, Graz, Austria. pp.1223-1228, ⟨10.4028/www.scientific.net/KEM.651-653.1223⟩. ⟨hal-01178171⟩

• Communication dans un congrès

Transmitted torque observer applied to real time engine and clutch torque estimation

Rémi Losero, Jimmy Lauber, Thierry-Marie Guerra

In automation control system applications, the transmitted engine and clutch torque are unavoidable information for the control strategies. For example, these information are required to engine control, hybrid vehicle and automated transmission management. An angular domain discrete observer is…

1st IFAC Workshop on Linear Parameter Varying Systems LPVS 2015, Oct 2015, Grenoble, France. pp.73-78, ⟨10.1016/j.ifacol.2015.11.116⟩. ⟨hal-03659494⟩

• Communication dans un congrès

Towards a Framework for Integration of Requirements Engineering in PLM

Albéric Cornière, Virginie Fortineau, Thomas Paviot, Samir Lamouri

Requirements Engineering is often seen as the process starting with the expression of requirements from stakeholders that aims to provide a coherent set of specifications, thus a starting point in the life cycle of a product. In a PLM context, managing the products data in order to prepare for the…

15th IFAC Symposium on Information Control Problems in Manufacturing, May 2015, Ottawa, Canada. pp.283-287, ⟨10.1016/j.ifacol.2015.06.095⟩. ⟨hal-03416997⟩

• Communication dans un congrès

A viscoelastic-viscoplastic model for short-fibre reinforced polymers with complex fibre orientations

Mariem Nciri, Delphine Notta-Cuvier, Franck Lauro, Fahmi Chaari, Bassem Zouari, Yamen Maalej

This paper presents an innovative approach for the modelling of viscous behaviour of short-fibre reinforced composites (SFRC) with complex distributions of fibre orientations and for a wide range of strain rates. As an alternative to more complex homogenisation methods, the model is based on an…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.04008, ⟨10.1051/epjconf/20159404008⟩. ⟨hal-03433232⟩