Publications

Type of document

Keywords

Author

Of

At

Affichage de 1041 à 1050 sur 5527

Article dans une revue

Experimental and Numerical Investigations for Quantifying Variability of NR Mechanical Properties after Thermal Aging

Andrés Malo Estepa, Franck Massa, Adnane Boukamel, Thierry Tison, Philippe Champagne, Stéphane Méo, Andreas Wolf

The evolution of mechanical properties of NR with carbon black fillers was examined after a thermal aging step through both experimentation and non-deterministic numerical simulations. A quantification of mechanical properties and associated variability is first proposed for a set of specimens…

Rubber Chemistry and Technology, 2021, 94 (1), pp.160-179. ⟨10.5254/rct.20.80405⟩. ⟨hal-02465445⟩

Chapitre d'ouvrage

Analytical Model for the computation of the drug administration dynamics and inlet pressures of an intravenous infusion system

Mostafa Brik, Souad Harmand, Mony Girault, Anne-Laure Metz, François Rochiccioli, Fabrice Lapeyre, Jérome Clarysse

In this paper, we have elaborated an analytical model to study the dynamics of the Smof-Lipid delivery in Neonate nutrition fluid with an Intravenous (IV) infusion system. For a simple configuration, containing two inlets and one outlet, used mainly in neonatology, analytical computations were…

American Journal of Biomedical Engineering, 10 (3), pp.55-63, 2020. ⟨hal-03432511⟩

Article dans une revue

Computational Reduction of Optimal Hybrid Vehicle Energy Management

Carlos Armenta, Sebastien Delprat, Rudy R Negenborn, Ali Haseltalab, Jimmy Lauber, Michel Dambrine

Pontryagin's Minimum Principle is a way of solving hybrid powertrain optimal energy management. This letter presents an improvement of a classical implementation. The core of this improvement consists in relaxing the tolerance on some intermediate steps of the algorithm in order to reduce the…

IEEE Control Systems Letters, 2020, 6, pp.25-30. ⟨10.1109/LCSYS.2020.3046609⟩. ⟨hal-04556682⟩

Article dans une revue

Fabrication and optimization of high frequency ZnO transducers for both longitudinal and shear emission: application of viscosity measurement using ultrasound

Hatem Dahmani, Ibrahim Zaaroura, Abbas Salhab, Pierre Campistron, Julien Carlier, Malika Toubal, Souad Harmand, V. Thomy, Marc Neyens, Bertrand Nongaillard

This paper covers the study of high-frequency (~ 1 GHz) ZnO piezoelectric transducer integrated on a silicon substrate able to generate both compressional and shear acoustic waves. First, to promote the longitudinal mode, an electrical matching of the transducer in this high-frequency range is…

Advances in Science, Technology and Engineering Systems Journal, 2020, 5 (6), pp.1428-1435. ⟨10.25046/aj0506173⟩. ⟨hal-03129037⟩

Communication dans un congrès

Model and Flow Sheet Improvements for Coal fired Power Plants Equipped with a CO2 Capture Process Using Monoethanolamine

Tanguy Hahn, Jian Chen, Weiyang Fei, Fethi Aloui

The present paper follows two prior works by Liu et al. (2015) and Liu et al. (2017), conducted on the subject of CO2 capture with a monoethanolamine based process. The study presented in this article is about the improvements brought to the flow sheet of supercritical coal-fired power plant aiming…

12th International Exergy, Energy and Environment Symposium (IEEES-12), Dec 2020, Doha (en ligne), Qatar. ⟨hal-04161203⟩

Communication dans un congrès

Theoretical Investigations of Stirling Engine Performances for Different Working Fluids

Houda Hachem, Ramla Gheith, Fethi Aloui

The present paper is performed to investigate the effect of working fluids on a double-acting Stirling engine performance. A numerical model that includes major thermal losses that decrease the Stirling output power and efficiency was developed. The influences of tree monatomic gases (helium, Neon…

12th International Exergy, Energyand Environment Symposium (IEEES-12), Dec 2020, Doha (en ligne), Qatar. ⟨hal-04161214⟩

Communication dans un congrès

Heating Rate Effect on Tetrapak Paper Pyrolysis: Thermogravimetric Analysis

Afef Bouazizi, Emna Berrich, Imene Bekri, Ezzedine Srasra, Fethi Aloui

Biomass and plastics are considered to be one of the most important renewable sources in nature. The typical composition of a tetrapak is 70% of cardboard (Kraft paper), 25% of low-density polyethylene (LDPE), and 5% of aluminum foil. In this paper, we present the heat rate effect on tetrapak…

12th International Exergy, Energy and Environment Symposium (IEEES-12), Dec 2020, Doha (en ligne), Qatar. ⟨hal-04161239⟩

Communication dans un congrès

Spectral Analysis of LBM-LES Numerical Data on Lid-Driven Cavity

Insaf Mehrez, Ramla Gheith, Fethi Aloui

The lid-driven cavity is an important fluid mechanical system work for as a benchmark for testing numerical methods and for examining fundamental aspects of incompress- ible flows in confined volumes which are driven by the tangential motion of the bounding wall. A numerical study is provided of…

12th International Exergy, Energy and EnvironmentSymposium (IEEES-12), Dec 2020, Doha (en ligne), Qatar. ⟨hal-04161225⟩

Thèse

Hybrid Vehicle Design and Control, Conception et commande de véhicules hybrides

Marcelino Sanchez Pantoja

This work is concerned with the development of hybrid electric vehicle technologies. It is split into three main topics : The ﬁrst topic, covered in Chapter 2, is concerned with the energetic supervisory control that, by taking advantage of the extra degrees of freedom present in a hybrid vehicle,…, La thèse s’intéresse au développement des technologies de véhicules hybrides. Elle comprend trois thèmes principaux : En portant des degrés de liberté supplémentaires du véhicule hybride, la stratégie de gestion ´énergétique répond aux demandes de puissance du conducteur de telle manière que la…

Electric power. Université Polytechnique Hauts-de-France, 2020. English. ⟨NNT : 2020UPHF0036⟩. ⟨tel-03235986⟩

Thèse

Caractérisation et modélisation du comportement et de la rupture de thermoplastiques pour une large gamme de vitesse de déformation et de température, Characterization and modeling of the behaviour and the failure of thermoplastics in a wide strain-rate range and temperature

Vincent Dorleans

De nos jours les matériaux polymères sont omniprésents dans l’habitacle d’un véhicule. C’est le cas notamment pour les composants comme la planche de bord ou les panneaux de portes. Ces éléments sont soumis à des cahiers des charges imposés par les réglementations internationales pour minimiser les…, Nowadays, polymers are used for the interior parts of vehicles. It is particularly the case for components such as dashboards and door panels. These elements are submitted to requirements imposed by international regulations in order to minimize the injuries of the passengers in case of a car crash…

Sciences de l'ingénieur [physics]. Université Polytechnique Hauts-de-France; Institut national des sciences appliquées Hauts-de-France, 2020. Français. ⟨NNT : 2020UPHF0031⟩. ⟨tel-03376760⟩