Publications

• Article dans une revue

Lattice Strain Evolutions in Ni-W Alloys during a Tensile Test Combined with Synchrotron X-ray Diffraction

Tarik Sadat, Damien Faurie, Dominique Thiaudière, Cristian Mocuta, David Tingaud, Guy Dirras

Ni and Ni(W) solid solution of bulk Ni and Ni-W alloys (Ni-10W, Ni-30W, and Ni-50W) (wt%) were mechanically compared through the evolution of their {111} X-ray diffraction peaks during in situ tensile tests on the DiffAbs beamline at the Synchrotron SOLEIL. A significant difference in terms of…

Materials, 2020, 13 (18), pp.4027. ⟨10.3390/ma13184027⟩. ⟨hal-03449197⟩

• Proceedings/Recueil des communications

A Proposal to Model the Monitoring Architecture of a Complex Transportation System.

Issam Mallouk, Thierry Berger, Badr Abou El Majd, Yves Sallez

Enterprises of the transportation sector must face a huge competition. So, an efficient vehicles fleet management is crucial. The present work proposes a generic model adapted to the monitoring of a fleet of vehicles. This model is able to describe the information chain and the different decisional…

Proceedings of SOHOMA 2020, 952, Springer International Publishing, pp.532-542, 2020, Studies in Computational Intelligence. ⟨hal-03403102⟩

• Article dans une revue

Experimental assessment of the sudden-reversal of the oxygen dilution effect on soot production in coflow ethylene flames II: soot radiation and flame transition analysis

Qianlong Wang, Jean-Louis Consalvi, Céline Morin, Guillaume Legros, Franklin Liu, Weiwei Cai, Haifeng Liu

The current study focuses on the radiative characteristics of heavy smoking flames that are formatted by oxygen being added to the fuel stream of a steady laminar ethylene diffusion flame. In such a scenario, based on the experimental local soot temperature and volume fraction results, the soot…

• Article dans une revue

Machine learning applied in production planning and control: a state-of-the-art in the era of industry 4.0

Juan Pablo Usuga Cadavid, Samir Lamouri, Bernard Grabot, Robert Pellerin, Arnaud Fortin

Because of their cross-functional nature in the company, enhancing Production Planning and Control (PPC) functions can lead to a global improvement of manufacturing systems. With the advent of the Industry 4.0 (I4.0), copious availability of data, high-computing power and large storage capacity…

Journal of Intelligent Manufacturing, 2020, 31 (6), pp.1531-1558. ⟨10.1007/s10845-019-01531-7⟩. ⟨hal-03424530⟩

• Article dans une revue

Distributed Consensus Observer for Multiagent Systems With High-Order Integrator Dynamics

Zongyu Zuo, Michael Defoort, Bailing Tian, Zhengtao Ding

This article presents a distributed consensus observer for multiagent systems with high-order integrator dynamics to estimate the leader state. Stability analysis is carefully studied to explore the convergence properties under undirected and directed communication, respectively. Using Lyapunov…

IEEE Transactions on Automatic Control, 2020, 65 (4), pp.1771-1778. ⟨10.1109/TAC.2019.2936555⟩. ⟨hal-03424633⟩

• Article dans une revue

Semelles de posture et prévention de la chute chez la personne âgée, Soles for posture and prevention of falls in the elderly person

Frédéric Viseux, Sylvie Villeneuve-Parpay

La chute chez la personne âgée de plus de 60 ans est associée à des déficiences sensorielles, neuromusculaires et ostéo-articulaires. La prise en charge par semelles de posture constitue un atout majeur dans la prévention du risque de chute de nos aînés. Elle fait suite à une investigation…

Revue du Podologue, 2020, 16 (91), pp.17-20. ⟨10.1016/j.revpod.2019.12.008⟩. ⟨hal-03465509⟩

• Article dans une revue

Analysis of lubricant performance in punching and blanking

Marcel Moghadam, Matteo Villa, Philippe Moreau, André Dubois, Laurent Dubar, Chris V. Nielsen, Niels Bay

Punching and blanking processes are characterized by severe tribological conditions due to the creation of virgin surfaces, which are highly prone to develop pick-up of workpiece material on the punch surface. Hazardous forming lubricants are, therefore, commonly used in punching and blanking…

Tribology International, 2020, 141, pp.105949. ⟨10.1016/j.triboint.2019.105949⟩. ⟨hal-03442244⟩

• Article dans une revue

Study of transient condensation occurring during the starting of the evaporation of a droplet deposited on a heated substrate

Dorra Khilifi, Walid Foudhil, Kamel Fahem, Souad Harmand, Sadok Ben Jabrallah

The evaporation of a drop deposited on a heated substrate is a complex process, which combines several phenomena such as the Marangoni effect, mass and thermal transfers, etc. We developed, in this paper, a mathematical model and a numerical simulation code used to carry out an in-depth study about…

Thermal Science, 2020, 24 (6 Part B), pp.4075-4087. ⟨10.2298/TSCI181122377K⟩. ⟨hal-03579860⟩

• Article dans une revue

Particulate emissions measurements by laser-based techniques in a boiler fueled by wood pellets

Salma Bejaoui, Marie Creyx, Eric Delacourt, Céline Morin, Eric Therssen

This paper describes mainly laser-based techniques applied to a boiler fueled by wood pellets which is a real complicated combustion system. To our knowledge, laser-induced incandescence (LII) and extinction are used to characterize particulate emission at the exhaust for the first time because…

Applied Physics B - Laser and Optics, 2020, 126 (1), ⟨10.1007/s00340-019-7350-5⟩. ⟨hal-03440947⟩

• Article dans une revue

Skewed general variable neighborhood search for the cumulative capacitated vehicle routing problem

Noura Smiti, Mohamed Mahjoub Dhiaf, Bassem Jarboui, Said Hanafi

The cumulative capacitated vehicle routing problem (CCVRP) is a relatively new version of the classical capacitated vehicle routing problem, and it is equivalent to a traveling repairman problem with capacity constraints and a homogeneous vehicle fleet, which aims to minimize the total arrival time…

International Transactions in Operational Research, 2020, 27 (1), pp.651-664. ⟨10.1111/itor.12513⟩. ⟨hal-03400354⟩