Publications

• ART

Fluid flow and convective heat transfer analysis on a rotor of wind turbine alternator with an impinging jet

Chadia Haidar, Rachid Boutarfa, Souad Harmand

This work presents a numerical and experimental study of convection heat transfer in the unconfined air gap of a discoidal technology rotor-stator system. In particular, the rotor is cooled here by an eccentric air jet impingement. The cavity is characterized by a dimensionless spacing G = 0.02 and…

International Journal of Renewable Energy Research, 2019, 9 (3), pp.1144-1153. ⟨10.20508/ijrer.v9i3.9471.g7692⟩. ⟨hal-03451512⟩

• ART

Local wall temperature mapping during flow boiling in a transparent microchannel

Sofia Korniliou, Coinneach Mackenzie-Dover, Souad Harmand, Gail Duursma, John R.E. Christy, J.G. Terry, A.J. Walton, K. Sefiane

In this study the local two-phase heat transfer coefficients were obtained using wall temperature measurements and fluid saturation temperatures in a rectangular high-aspect-ratio polydimethylsiloxane (PDMS) microchannel with a hydraulic diameter of 192 μm. The experiments used FC-72 liquid with a…

International Journal of Thermal Sciences, 2019, 135, pp.344-361. ⟨10.1016/j.ijthermalsci.2018.09.028⟩. ⟨hal-03448705⟩

• ART

Joining the blunt and the pointy end of the spear: towards a common framework of joint action, human–machine cooperation, cooperative guidance and control, shared, traded and supervisory control

Frank Flemisch, David Abbink, Makoto Itoh, Marie-Pierre Pacaux-Lemoine, Gina Wessel

To introduce this special issue of shared and cooperative control, we will look into history of tools in cooperation between humans and aim to unify the plethora of related concepts and definitions that have been proposed in recent years, such as shared control, human–machine cooperation and…

Cognition, Technology and Work, 2019, 21 (4), pp.555-568. ⟨10.1007/s10111-019-00576-1⟩. ⟨hal-03644221⟩

• COMM

Efficient matheuristics for multicommodity capacitated network design

Bernard Gendron, Said Hanafi, Raca Todosijević

We present matheuristics for the multicommodity capacitated fixed-charge network design problem (MCND). The matheuristics are based on combining iterative linear programming (ILP) methods and slope scaling (SS) heuristics. Each iteration alternates between solving a linear program obtained by…

• ART

Mean Square Consensus of Double-Integrator Multi-Agent Systems under Intermittent Control

Dylan Poulsen, Michael Defoort, Mohamed Djemai

We consider the leader–follower consensus problem for a multi-agent system where information is exchanged only on a non-uniform discrete stochastic time domain. For a second-order multi-agent system subject to intermittent information exchange, we model the tracking error dynamics as a μ−varying…

Journal of The Franklin Institute, 2019, 356 (16), pp.9076-9094. ⟨10.1016/j.jfranklin.2019.07.011⟩. ⟨hal-03405351⟩

• COMM

A Simulation-Optimization Approach for Two-Way Scheduling/Grouping in a Road-Rail Physical Internet Hub

Tarik Chargui, Abdelghani Bekrar, Mohamed Reghioui, Damien Trentesaux

Physical Internet (PI) was introduced to transform the current logistics systems into a global sustainable logistics network. This paper focuses on two-way scheduling/grouping in both sections of a Road-Rail PI-hub (Road→Rail and Rail→ Road). It consists in scheduling both inbound and outbound…

9th IFAC/IFIP/IFORS/IISE/INFORMS Conference Manufacturing Modelling, Management and Control (MIM'19), Aug 2019, Berlin, Germany. pp.1644-1649, ⟨10.1016/j.ifacol.2019.11.436⟩. ⟨hal-03519538⟩

• REPORT

Compte-rendu intermédiaire

Damien Trentesaux, Marie-Pierre Pacaux-Lemoine, Serge Debernard, Simon Enjalbert, Emmanuel Adam, Thérèse Bonte, Quentin Berdal, Clément Guerin, Philippe Rauffet, Christine Chauvin, Eric Martin, Philippot Alexandre, Bernard Riera, David Annebicque, J. Zaytoon

L’un des objectifs de l’Usine du Future est de fabriquer rapidement des produits sur mesure de haute qualité, avec un niveau de consommation énergétique bas en amenant de la souplesse au sein du système manufacturier global. Cet objectif implique de construire des systèmes manufacturiers plus…

[Rapport de recherche] HUMANISM. 2019. ⟨hal-03420496⟩

• ART

Material behaviour at low temperatures for calibrating cryogenic machining numerical simulations

Rachele Bertolini, Stefania Bruschi, Andrea Ghiotti, Grégory Haugou, Hervé Morvan, Laurent Dubar

Recently, cryogenic machining of difficult-to-cut alloys has been adopted to increase tool life and improve the machined components surface integrity. Numerical models of cryogenic machining are being developed to evaluate the influence of the different process parameters. Up to now, their…

Procedia CIRP, 2019, 82, pp.344-349. ⟨10.1016/j.procir.2019.04.160⟩. ⟨hal-03609147⟩

• COUV

Metal Forming and Lubrication

André Dubois, Abu N.M. Karim

In metal forming (cold or hot), localized compressive force is applied on the workpiece through a forming tool. This force leads to generate high contact pressures at the workpiece/tool interface and as a result the workpiece is deformed to deliver a desired shape and surface of the product. In…

Reference Module in Materials Science and Materials Engineering, Elsevier, 2019, 978-0-12-803581-8. ⟨10.1016/B978-0-12-803581-8.03565-7⟩. ⟨hal-03651843⟩

• COMM

Decoupling Unknown Input Observer for nonlinear LPV systems

Dalil Ichalal, Thierry-Marie Guerra

58th IEEE Conference on Decision and Control, Institute of Electrical and Electronics Engineers (IEEE), Jan 2019, Nice, France. ⟨hal-03433037⟩