Publications

• Communication dans un congrès

Thermomechanical modeling of glass cooling including thermal radiation using P1 method

Kossiga Agboka, Fabien Béchet, Philippe Moreau, Dominique Lochegnies

Glass tempering consists in heating a glass product over its transition temperature followed by a rapid cooling to the ambient temperature. This process is used to improve the mechanical resistance of the glass product with compressive stresses on the surface and tensile stresses in the core. The…

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03465240⟩

• Article dans une revue

Experimental assessment of the sudden-reversal of the oxygen dilution effect on soot production in coflow ethylene flames

Qianlong Wang, Guillaume Legros, Jérôme Bonnety, Céline Morin, Alexis Matynia, Jean-Louis Consalvi, Fengshan Liu

This paper explores the influence of oxygen dilution on soot production when oxygen is added to the fuel stream of a steady laminar ethylene flame established over the Santoro axisymmetric coflow burner. Interestingly, at an oxygen mole fraction X_{ax}^{O_2,trans} located between 30% and 32%, a…

Combustion and Flame, 2017, 183, pp.242-252. ⟨10.1016/j.combustflame.2017.05.001⟩. ⟨hal-01557989⟩

• Article dans une revue

Nopol: Automatic Repair of Conditional Statement Bugs in Java Programs

Jifeng Xuan, Matias Martinez, Favio Demarco, Maxime Clément, Sebastian Lamelas, Thomas Durieux, Daniel Le Berre, Martin Monperrus

We propose NOPOL, an approach to automatic repair of buggy conditional statements (i.e., if-then-else statements). This approach takes a buggy program as well as a test suite as input and generates a patch with a conditional expression as output. The test suite is required to contain passing test…

IEEE Transactions on Software Engineering, 2017, 43 (1), pp.34-55. ⟨10.1109/TSE.2016.2560811⟩. ⟨hal-01285008v2⟩

• Rapport

The Patches of the Nopol Automatic Repair System on the Bugs of Defects4J version 1.1.0

Thomas Durieux, Benjamin Danglot, Zhongxing Yu, Matias Martinez, Simon Urli, Martin Monperrus

This report lists the test-suite adequate patches found by the Nopol automatic repair system on version 1.1.0 of the Defects4J benchmark of bugs.

[Research Report] hal-01480084, Université Lille 1 - Sciences et Technologies. 2017. ⟨hal-01480084⟩

• Article dans une revue

A review of characterisation and parameters identification of materials constitutive and damage models: From normalised direct approach to most advanced inverse problem resolution

Eric Markiewicz, Bertrand Langrand, Delphine Notta-Cuvier

The paper aims at providing an overview of the research activities performed in the two past decades in the field of materials characterisation under dynamic loadings (i.e. from to for structural crashworthiness and impact applications) and identification of parameters of constitutive behaviour and…

International Journal of Impact Engineering, 2017, 110, pp. 371-381. ⟨10.1016/j.ijimpeng.2017.01.028⟩. ⟨hal-01659636⟩

• Article dans une revue

Macro-modeling of spot weld strength and failure: Formulation and identification procedure based on pure and mixed modes of loading, Modélisation à l'échelle macroscopique de la tenue et de la rupture des points soudés : formulation et procédure d'identification fondée sur des changements en mode purs et mixtes

Rim Chtourou, Nicolas Leconte, Bassem Zouari, Fahmi Chaari, Eric Markiewicz, Bertrand Langrand

Purpose This paper aims to propose a macro modeling approach to simulate the mechanical behavior and the failure of spot welded joints in structural crashworthiness computations. Design/methodology/approach A connector element is proposed to simulate the behavior and failure of spot weld joints. An…

Engineering Computations, 2017, 34 (3), pp.941-959. ⟨10.1108/EC-03-2016-0081⟩. ⟨hal-01580320⟩

• Article dans une revue

Effect of Operating Parameters on the Heat Transfer and Liquid Film Thickness of Revolving Heat Pipe

Hamdy Hassan, Souad Harmand

This paper presents a study on the effects of operating parameters on the liquid film thickness and heat transfer of revolving heat pipe. The effects of speed, radius of rotation, evaporator and condenser temperatures, and mass of the working fluid are considered. Also, the effects of these…

Heat Transfer Engineering, 2017, 38 (5), pp.538-548. ⟨10.1080/01457632.2016.1195175⟩. ⟨hal-03461759⟩

• Article dans une revue

An Improved Downlink MC-CDMA System for Efficient Image Transmission

Mohammed Sofiane Bendelhoum, Ali Djebbari, Ismail Boukli Hacene, Abdelmalik Taleb-Ahmed

Image compression is an essential stage of the data archiving and transmitting process, as it reduces the number of bits and the time required to complete the transmission. In this article, a study of image transmission over the Multi-Carrier Code Division Multiple Access (MC-CDMA) downlink system…

Journal of Telecommunications and Information Technology, 2017, 4, pp.5-16. ⟨10.26636/jtit.2017.110917⟩. ⟨hal-03666580⟩

• Communication dans un congrès

Effects of 12 months of resistance training versus endurance training on bone mineral density in young overweight men

Rawad El Hage, C. El-Khouri, J. Matta, F. Frenn, Ghassan Maalouf, M. Rizkallah, Antonio Pinti, Eric Watelain, Hechmi Toumi, E. Lespesailles

WCO-IOF-ESCEO, 2017, Florence, Italy. ⟨hal-03462120⟩

• Article dans une revue

Mock-up Study of the Effect of Wall distance on the Thermal Rating of Power Cables in Ventilated Tunnels

Fahd Boukrouche, Christophe Moreau, Julien Pellé, François Beaubert, Souad Harmand, Olivier Moreau

Power transmission through power cables installed in ventilated tunnels is increasingly used worldwide and offers a complex thermal environment. Established correlations currently in use have been deduced from a nonfully developed turbulent flow and the effect of the proximity to a tunnel wall is…

IEEE Transactions on Power Delivery, 2017, 32 (6), pp.2453 - 2461. ⟨10.1109/TPWRD.2016.2629285⟩. ⟨hal-03461856⟩