Publications

• COUV

Arezzo: an emulator for the bench4star initiative

Thierry Berger, Dominique Deneux, Thérèse Bonte, Etienne Cocquebert, Damien Trentesaux

Fischer X., Daidie A., Eynard B., Paredes M. Research in Interactive Design, 4, Springer, pp. 530-536, 2016, 978-3-319-26119-5. ⟨hal-03406808⟩

• ART

Experimental study on the stability of an impedance-type force-feedback architecture based on an augmented-state observer for a haptic system under time delay using a LMI approach

Quoc Viet Dang, Laurent Vermeiren, Antoine Dequidt, Michel Dambrine

One of the most important performance measures of a haptic interface may be characterized by its behaviour in the implementation of a virtual wall in terms of the biggest value of the virtual stiffness that still leaves the device stable. This value depends on many factors including time delays and…

Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2016, 230 (1), pp.58-71. ⟨10.1177/0959651815611566⟩. ⟨hal-03426981⟩

• COUV

Measurements of dynamic properties of ballistic yarns using innovative testing devices

Caroline Chevalier, Christophe Kerisit, Andreas Klavzar, François Boussu, Daniel Coutellier

This chapter highlights the influence of the dynamic characteristic of yarn on the ballistic performance of fabric submitted to impact. A brief review of existing research works done on the dynamic tensile test known as the Hopkinson bar, and more recently the Split Flying Bar, is presented. A new…

Advanced Fibrous Composite Materials for Ballistic Protection, Elsevier, pp.199-215, 2016, 978-178242461-1. ⟨10.1016/B978-1-78242-461-1.00007-8⟩. ⟨hal-03667392⟩

• ART

Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling

Mahmoud Charmiyan, Ahmed-Reza Azimian, Laurent Keirsbulck, Ebrahim Shirani, Fethi Aloui

A 3D numerical simulation using large eddy simulation (LES) method is performed for a submerged turbulent water slot jet impinging normally on a flat plate with a nozzle-to-plate distance of 10 jet width and a Reynolds number of 16000 and the results are compared with the existing experimental data…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.11-17. ⟨10.36884/jafm.9.SI1.25825⟩. ⟨hal-03448221⟩

• REPORT

Modélisation macroscopique d’un assemblage soudé 3 tôles multi-matériaux

Nicolas Leconte, Rim Chtourou, Tuan Hung Nguyen, Eric Markiewicz, Fahmi Chaari, Grégory Haugou

[Rapport de recherche] Rapport projet ANR ASAP, LAMIH, Valenciennes. 2016. ⟨hal-03442603⟩

• ART

A new reduced model of scavenging to optimize cylinder design

Stéphanie Cagin, Xavier Fischer, Eric Delacourt, Nachida Bourabaa, Céline Morin, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents the development of a new scavenging model to optimize cylinder design. The developed model explicitly integrates some of the cylinder’s design and environmental variables to describe flows during the scavenging process. Then, based on the reduced model, an optimization phase was…

SIMULATION: Transactions of The Society for Modeling and Simulation International, 2016, 92 (6), pp.507-520. ⟨10.1177/0037549716644516⟩. ⟨hal-01330975⟩

• ART

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin, Nachida Bourabaa, Eric Delacourt, Céline Morin, Xavier Fischer, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents a method to improve cylinder design of 2-stroke auto-ignition engine based on a CFD (Computational Fluid Dynamics) study of internal flows in the chamber and an unsteady global 0D parametric approach. In 2-stroke engine, scavenging process plays an important role regarding…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.69-80. ⟨10.36884/jafm.9.SI1.26397⟩. ⟨hal-01330948⟩

• ART

Proposal for a process oriented knowledge management system (PKMS)

Ludovic Louis Sidney, Vincent Cheutet, Samir Lamouri

In an increasingly competitive environment, manufacturing companies are more frequently looking to handle the knowledge referentials relating to their redesign processes. They are then able to implement this with less effort and balance out their work capacity for innovation activities,…

International Journal of Product Development, 2016, 21 (4), pp.267-287. ⟨10.1504/IJPD.2016.080309⟩. ⟨hal-01518656⟩

• ART

Modélisation 0D et caractérisation expérimentale d’une chaudière biomasse. Revista Termotehnica

Fateh Mameri, Eric Delacourt, Marc Lippert, Céline Morin

Le papier présente une étude expérimentale et la modélisation 0D du comportement dynamique d'une chaudière biomasse basée sur le formalisme Bond Graph. La chaudière biomasse utilisée dans cette étude est une chaudière automatique à pellets d’une puissance calorifique nominale de 30 kW avec un…

Revista Termotehnica, 2016. ⟨hal-03462126⟩

• COMM

ASSESSMENT OF THE MECHANICAL AND TRIBOLOGICAL PERFORMANCE OF A ZrN PVD COATING

Mariana Staia, A Trocelis, Amel Zairi, M Suarez, Eli Saúl Puchi-Cabrera, Alain Iost, Alex Montagne

The present work has been conducted in order to assess the mechanical and tribological performance of a ZrN coating deposited onto a H13 steel substrate by means of a closed field unbalanced magnetron-sputtering ion-plating (CFUMSIP) process. The hardness and elastic modulus of the coated system…

Surface Modification Technologies, Jul 2016, Milan, Italy. pp.1-9. ⟨hal-03169208⟩