Publications

• ART

Method for quantitative assessment of the domino effect in industrial sites

Farid Kadri, Eric Chatelet, Guangpu Chen

Accidents caused by the domino effect are the most destructive accidents related to industrial sites. The most typical primary incidents for a domino effect sequence are explosions (57%), followed by fires (43%). These former can generate three escalation vectors (heat load, overpressure, and…

Process Safety and Environmental Protection, 2013, 91 (6), pp.452-462. ⟨10.1016/j.psep.2012.10.010⟩. ⟨hal-02332123⟩

• ART

Steering wheel hand position in low-speed maneuvers

Jessica Schiro, François Gabrielli, Philippe Pudlo, Mohamed Djemai, Franck Barbier

The pattern of hand positioning varies considerably as drivers attempt to steer through sharp turns at low speed. The technique chosen by the driver should be the best compromise between car control and driver safety (i.e. airbag deployment). The purpose of this study was to assess different…

Transportation Research Part F: Traffic Psychology and Behaviour, 2013, 21, pp.133-145. ⟨10.1016/j.trf.2013.09.003⟩. ⟨hal-03624787⟩

• ART

Human-Centered Design strategy applied to the development of a system to support the entry of coded and structured medical information

Sylvain Hassler, Nicolas Leroy, Maxime Baas, César Boog, Séverine Loiseau, Madeleine Favre, Sylvia Pelayo

Coding medical records data is a key factor for an optimal use of software dedicated to physicians. Now, coding tools provided to physicians are rarely used because of ergonomics problems making their use arduous. Applying the User Centered Design approach to the development of this kind of tools…

Innovation and Research in BioMedical engineering, 2013, 34 (4-5), pp.259-262. ⟨10.1016/j.irbm.2013.09.003⟩. ⟨hal-03478733⟩

• REPORT

Doctrine d’emploi des disciplines de SAMOSA

Igor Crevits

[Rapport de recherche] Université de valenciennes et du Hainaut-Cambrésis; Laboratoire d'automatique, de mécanique et d'informatique industrielles et humaines. 2013. ⟨hal-03642779⟩

• ART

Special issue DSD 2012 on Reliability and dependability in MPSoC Technologies

Smail Niar, Cristina Silvano

Microprocessors and Microsystems: Embedded Hardware Design , 2013, 37 (8, PART A), pp.759. ⟨10.1016/j.micpro.2013.08.005⟩. ⟨hal-03624184⟩

• ART

Parametric Study of the Effect of the Vapor Chamber Characteristics on Its Performance

Hamdy Hassan, Souad Harmand

In this work, the effect of vapor chamber characteristics, the properties of its working fluid and the operating parameters on the vapor chamber performance are studied. Also, the effects of these parameters on the cooling process are considered. A three dimensional hydrodynamic model is used for…

Journal of Heat Transfer, 2013, 135 (11), pp.111008. ⟨10.1115/1.4024613⟩. ⟨hal-03615914⟩

• ART

Friction analysis at the glass/tool interface and the lubrication influence during hot forming cycles

Philippe Moreau, Damien Montoya, Dominique Lochegnies, Hugues Vivier

In the hollow glass industry, specifically in the luxury perfume glass bottle industry, the success of the forming process depends on preventing the sticking at the glass/mold interface to make it easier to release the mold and prevent defects on the glass surface. This study concerns a new way to…

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2013, 227 (11), pp.1253-1260. ⟨10.1177/1350650113488309⟩. ⟨hal-03621581⟩

• ISSUE

DSD 2012 on Reliability and Dependability in MPSoC Technologies

Smail Niar, Cristina Silvano

Microprocessors and Microsystems: Embedded Hardware Design , 37 (8), pp.759-884, 2013, Special Issue. ⟨hal-03469235⟩

• COMM

Friction analysis at the glass/tool interface and the lubrication influence during hot forming cycles

Philippe Moreau, Damien Montoya, Dominique Lochegnies, Hugues Vivier

In the hollow glass industry, specifically in the luxury perfume glass bottle industry, the success of the forming process depends on preventing the sticking at the glass/mold interface to make it easier to release the mold and prevent defects on the glass surface. This study concerns a new way to…

XXIII International Congress on Glass, Society of Glass Technology, Jul 2013, Prague, Czech Republic. pp.1253-1260, ⟨10.1177/1350650113488309⟩. ⟨hal-03448552⟩

• ART

Effects of synchronous versus asynchronous mode of propulsion on wheelchair basketball sprinting.

Arnaud Faupin, Benoît Borel, Christophe Meyer, Philippe Gorce, Eric Watelain

This study aimed to first investigate synchronous (SYN) versus asynchronous (ASY) mode of propulsion and, second, investigate the wheel camber effects on sprinting performance as well as temporal parameters. Seven wheelchair basketball players performed four maximal eight-second sprints on a…

Disability and Rehabilitation: Assistive Technology, 2013, 8 (6), pp.496-501. ⟨10.3109/17483107.2012.756947⟩. ⟨hal-01145760⟩