Publications

• Article dans une revue

Localization of IMU Sensors Affects the Estimation of Soft Tissue Wobbling: A Preliminary Study

Romain Guichard, Mathias Blandeau, Sebastien Leteneur

Computer Methods in Biomechanics and Biomedical Engineering, 2021, 24 (Supp1), pp.3. ⟨hal-03464242⟩

• Article dans une revue

Experimental analysis to reduce CO2 and other emissions of CRDI CI engine using low viscous biofuels

Edwin Geo Varuvel, Guillaume Fol, Fethi Aloui, Shanmugam Thiyagarajan, M. Jerome Stanley, Ankit Sonthalia, Kathirvel Brindhadevi, C. G. Saravanan

It is the need of the hour to quell the enormous demand of fossil fuels by extending the horizon towards Low Viscous Biofuels. An experimental investigation was carried out to study the performance of the diesel engine, its combustion behaviour and emission aspects while operating it with biofuels…

Fuel, 2021, 283, pp.118829. ⟨10.1016/j.fuel.2020.118829⟩. ⟨hal-03536742⟩

• Communication dans un congrès

Approach for CAD model reconstruction basing on 3D points insertion and surface approximation

Aicha Ben Makhlouf, Nessrine Elloumi, Borhen Louhichi, Dominique Deneux

Reverse engineering (RE) consists in the reconstruction of a geometric model of a 3D object from a set of points, a mesh or a 3D triangulation. This model is a combination of geometric primitives (cylinders, planes, spheres, etc.) and complex surfaces (B-Spline, NURBS…) defined by parameters that…

25th International Conference Information Visualisation (IV), Jul 2021, Sydney, Australia. pp.310-319, ⟨10.1109/IV53921.2021.00057⟩. ⟨hal-03531029⟩

• Chapitre d'ouvrage

Travailler auprès des personnes âgées: un avenir envisageable ou pas?

Janick Naveteur, Françoise Anceaux, Jeanne Thébault

C. Carra, A. Prominski, P. Pudlo. Silver économie, vulnérabilités et territoires, Presses Universitaires de Valenciennes, pp. 47-66, 2021. ⟨hal-03462769⟩

• Article dans une revue

Contribution of Achilles tendon mechanical properties to torque steadiness in persons with transfemoral amputation

Anis Toumi, Rowan Smart, Dimitri Elie, Jennifer Bassement, Sebastien Leteneur, Emilie Simoneau-Buessinger, Jennifer Jakobi

Background: How Achilles tendon mechanics and plantar flexion strength and torque steadiness are altered in the intact leg of persons with trauma-related amputation is unknown. Understanding Achilles tendon mechanics following amputation will further inform rehabilitation approaches to enhance…

Prosthetics and Orthotics International, 2021, 45 (2), pp.170-177. ⟨10.1177/0309364620966431⟩. ⟨hal-03463985⟩

• Article dans une revue

Numerical Investigation of Short Elliptical Twisted Tube for Reduced Fouling Rate in Steam Cracking Furnaces

Bruce Indurain y Urricelqui, François Beaubert, David Uystepruyst, Sylvain Lalot, Mathieu Couvrat

In the steam cracking industry of natural gas or naphtha, fouling of tubular heat exchangers by cokes is a major issue. This growing carboneous layer has two major negative effects: 1) it increases pressure drop and 2) reduces heat transfer from the tube wall to the processed fluid. Using the open-…

Heat Transfer Engineering, 2021, pp.1-12. ⟨10.1080/01457632.2021.1963536⟩. ⟨hal-03534362⟩

• Article dans une revue

CO2 reduction in a common rail direct injection engine using the combined effect of low carbon biofuels, hydrogen and a post combustion carbon capture system

Edwin Geo Varuvel, Shanmugam Thiyagarajan, Ankit Sonthalia, T. Prakash, Sary Awad, Fethi Aloui, Arivalagan Pugazhendhi

The transportation sector is a major emitter of carbon dioxide emissions. It is a known fact that carbon dioxide is the cause of global warming which has resulted in extreme weather conditions as well as climate change. In this study a combination of different methods of expediting the CO2 emission…

Energy Sources, Part A, 2021, pp.1-20. ⟨10.1080/15567036.2021.1974128⟩. ⟨hal-03534331⟩

• Article dans une revue

Scheduling trucks and storage operations in a multiple-door cross-docking terminal considering multiple storage zones

Tarik Chargui, Abdelghani Bekrar, Mohamed Reghioui, Damien Trentesaux

Cross-docking is a logistics process in which products are unloaded through receiving docks and then transferred to shipping docks with almost no storage in between. In this paper, a mixed integer linear programming model (MILP) is proposed to optimise the scheduling, storage, assignment and…

International Journal of Production Research, 2021, pp.1-25. ⟨10.1080/00207543.2020.1853843⟩. ⟨hal-03426523⟩

• Article dans une revue

Galling phenomena in metal forming

Kuniaki Dohda, Masahito Yamamoto, Chengliang Hu, Laurent Dubar, Kornel F. Ehmann

Galling phenomena in metal forming not only affect the quality of the engineered surfaces but also the success or failure of the manufacturing operation itself. This paper reviews the different galling conditions in sheet and bulk metal forming processes along with their evolution and the effects…

Friction, 2021, 9 (4), pp.665-685. ⟨10.1007/s40544-020-0430-z⟩. ⟨hal-03449011⟩

• Article dans une revue

To the self and beyond: Arousal and functional connectivity of the temporo-parietal junction contributes to spontaneous sensations perception

Sara Salgues, Gaën Plancher, Laurence Jacquot, Janick Naveteur, Lison Fanuel, Germán Galvez-Garcia, George A. Michael

The temporoparietal junction (TPJ), along with the anterior insula (AI) and the extrastriate body area (EBA), play a major part in embodiment and self-awareness. However, these connections also appear to be frequently engaged in arousal and attentional processing of external events. Considering…

Behavioural Brain Research, 2021, 396, pp.112880. ⟨10.1016/j.bbr.2020.112880⟩. ⟨hal-03463982⟩