Publications

• Article dans une revue

Some improvements for determining the hardness of homogeneous materials from the work-of-indentation

Didier Chicot, Michel Yetna N'Jock, Francine Roudet, Xavier Decoopman, Mariana H. Staia, Eli Saúl Puchi-Cabrera

In this work, the total and plastic hardness of a variety of materials were determined from the work-of-indentation. We show that by taking into account the influence of the tip defect, both the total and plastic hardness have the same values and that the hardness-load dependence is considerably…

International Journal of Mechanical Sciences, 2016, 105, pp.279-290. ⟨10.1016/j.ijmecsci.2015.11.030⟩. ⟨hal-01249912⟩

• Article dans une revue

Behaviour of flow dynamics over an asymmetrical deep cavity at high reynolds numbers

Denis Cornu, Laurent Keirsbulck, Camila Chovet, Marc Lippert, Franck Kerhervé, Fethi Aloui

This paper presents an experimental study, based on the geometry of a cavity, about the flow effects using quantitative particle image velocimetry (PIV) and, local and instantaneous pressure measurements. Three configurations of rectangular deep cavities were investigated: symmetric and asymmetric…

Civil-Comp Proceedings, 2016, 110, ⟨10.4203/ccp.110.59⟩. ⟨hal-03668719⟩

• Article dans une revue

An approach to the prioritization of sustainable maintenance drivers in the TBL framework

Sandro de Paula Pires, Olivier Sénéchal, Eduardo Rocha Loures, José Fernando Jimenez

The current sustainable production model is supported by the Triple Bottom Line (TBL) concept and its three dimensions: economic, environmental, and social. This paper aims to propose an approach to identify and prioritize the attributes of the TBL dimensions, extracted from the Global Reporting…

IFAC-PapersOnLine, 2016, 49 (28), pp.150-155. ⟨10.1016/j.ifacol.2016.11.026⟩. ⟨hal-03670448⟩

• Communication dans un congrès

Advanced model based air path management using a discrete-angular controller in idle-speed context

Thomas Laurain, Jimmy Lauber, Reinaldo Martinez Palhares

This paper aims to present an original methodology to design a controller for the air path management considered as a nonlinear system that is presented as a periodic discrete Takagi-Sugeno (TS) model. A transformation is realized to translate the periodic behavior into a classic discrete model…

IFAC AAC, Jun 2016, Norkköping, Sweden. pp.611-618, ⟨10.1016/j.ifacol.2016.08.089⟩. ⟨hal-03407068⟩

• Communication dans un congrès

An Iterative Greedy Insertion Technique for Flexible Job Shop Scheduling Problem

Azzedine Bekkar, Oualid Guemri, Abdelghani Bekrar, Nassima Aissani, Bouziane Beldjilali, Damien Trentesaux

This paper studies the problem of scheduling in a flexible job shop. A greedy heuristic is developed to solve precisely the sequencing (allocation) problem. The principle of this approach is to iteratively insert operations on the machines until the objective of minimizing the Cmax (makespan) is…

8th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2016, Dec 2016, Troyes, France. pp.1956-1961, ⟨10.1016/j.ifacol.2016.07.917⟩. ⟨hal-03406967⟩

• Article dans une revue

Less is more: Basic variable neighborhood search for minimum differential dispersion problem

Nenad Mladenovic, Raca Todosijević, Dragan Urošević

In this paper, we propose a basic variable neighborhood search for solving Minimum differential dispersion problem using only the swap neighborhood structure in both descent (intensification) and shaking (diversification) steps. It has become a trend in the metaheuristic literature to use hybrid…

Information Sciences, 2016, 326, pp.160-171. ⟨10.1016/j.ins.2015.07.044⟩. ⟨hal-03400764⟩

• Article dans une revue

Exergy assessment of heat transfer inside a Beta type Stirling engine

Houda Hachem, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah, Ibrahim Dincer

This paper presents an assessment of both energy and exergy efficiencies of a Beta Stirling engine prototype with a 30 W capacity as the maximum mechanical power output. Its operating pressure is close to atmospheric pressure, and it supports a maximum hot end temperature of 650 degrees C. The…

International Journal of Exergy, 2016, 20 (2), pp.186-202. ⟨10.1504/IJEX.2016.076863⟩. ⟨hal-03447147⟩

• Communication dans un congrès

Attente en bord de rue de piétons adultes avant une traversée : positionnement et ressenti en fonction de l'âge

Delphine Caffier, Sylvain Cremoux, Franck Barbier, Aurélie Dageons, Janick Naveteur

COPIE 2016, 2016, Paris, France. ⟨hal-03457078⟩

• Communication dans un congrès

Classification et analyse des pistes de recherche relatives au CONWIP

Yann Jaegler, Patrick Burlat, Samir Lamouri, Damien Trentesaux

Les grands enjeux industriels actuels se traduisent par une demande de personnalisation des produits, de délais de livraison réduits, de taux de service en hausse et de systèmes productifs agiles. Ils élèvent le choix du système de contrôle de production au rang de sujet stratégique pour une usine…

Classification et analyse des pistes de recherche relatives au CONWIP . 11e Conférence Francophone d’Optimisation et Simulation- MOSIM’16 : « L’innovation technologique au service des systèmes : défis et opportunités», Aug 2016, Montréal, Canada. ⟨emse-01533191⟩

• Article dans une revue

Finding a stabilizing switching law for switching TS models

Zsofia Lendek, Paula Raica, Jimmy Lauber, Thierry-Marie Guerra

This paper considers the stabilisation of switching nonlinear models by switching between the subsystems. We assume that arbitrary switching between two subsystems is possible once a subsystem has been active for a predefined number of samples. We use a Takagi–Sugeno representation of the models…

International Journal of Systems Science, 2016, 47 (12), pp.2762-2772. ⟨10.1080/00207721.2015.1021290⟩. ⟨hal-03430042⟩