Publications

• Article dans une revue

A new cohesive element for structural bonding modelling under dynamic loading

David Morin, Benjamin Bourel, Bruno Bennani, Franck Lauro, Denis Lesueur

The purpose of this paper is to propose a simplified macroscopic three-dimensional cohesive element dedicated to crash engineering. At the boundary between the CCZM (Continuous Cohesive Zone Method) and the DCZM (Discrete Cohesive Zone Method) approaches, this cohesive element includes an improved…

International Journal of Impact Engineering, 2013, 53, pp.94-105. ⟨10.1016/j.ijimpeng.2012.02.003⟩. ⟨hal-03470519⟩

• Article dans une revue

Virtual Prototyping of an Electric Power Steering Simulator

Lamri Nehaoua, Mohamed Djemai, Philippe Pudlo

This paper presents a simulation tool for an electrical steering system whose aim is twofold: 1) to investigate the possibility of designing a minimum clearance mechatronic platform with sensorless control methods and 2) to evaluate assistance torque control feedback by considering technological…

IEEE Transactions on Intelligent Transportation Systems, 2013, 14 (1), pp.274--283. ⟨10.1109/TITS.2012.2211352⟩. ⟨hal-00747063⟩

• Article dans une revue

Color perception involves color representations firstly at a semantic level and then at a lexical level

Loïc Heurley, Thibaut Brouillet, Gabrielle Chesnoy, Denis Brouillet

Studies and models have suggested that color perception first involves access to semantic representations of color. This result leads to two questions: (1) is knowledge able to influence the perception of color when associated with a color? and (2) can the perception of color really involve only…

Cognitive Processing, 2013, 14 (1), pp.19-29. ⟨10.1007/s10339-012-0527-z⟩. ⟨hal-01468307⟩

• Rapport

Analyse et optimisation des capacités dau démoulage offertes par les pâtes por moules ébaucheurs d'articles de parfumerie en verre extra-blanc

Philippe Moreau, Dominique Lochegnies

[Rapport de recherche] Université de Valenciennes et du Hainaut-Cambrésis. 2013. ⟨hal-03538452⟩

• Article dans une revue

Preface

Eric Markiewicz, Franck Lauro

International Journal of Impact Engineering, 2013, 53, pp.2. ⟨10.1016/j.ijimpeng.2012.12.003⟩. ⟨hal-03623318⟩

• Ouvrages

Service Orientation in Holonic and Multi Agent Manufacturing and Robotics

Theodor Borangiu, André Thomas, Damien Trentesaux

The book covers four research domains representing a trend for modern manufacturing control: Holonic and Multi-agent technologies for industrial systems; Intelligent Product and Product-driven Automation; Service Orientation of Enterprise's strategic and technical processes; and Distributed…

Theodor Borangiu, André Thomas, Damien Trentesaux. Springer, 472, pp.390, 2013, Studies in Computational Intelligence, ISBN 978-3-642-35851-7. ⟨10.1007/978-3-642-35852-4⟩. ⟨hal-00759575⟩

• Article dans une revue

3D transient model of vapour chamber: effect of nanofluids on its performance

Hamdy Hassan, Souad Harmand

This paper presents three-dimensional transient model for vapour chamber (flat heat pipe) and the effect of nanofluids on its performance. The vapour chamber consists of two copper plates, two copper/water wick regions and a vapour region sandwiched between the two wick regions. The numerical model…

Applied Thermal Engineering, 2013, 51 (1-2), pp.1191-1201. ⟨10.1016/j.applthermaleng.2012.10.047⟩. ⟨hal-03470490⟩

• Article dans une revue

Quantification of first contact detection errors on hardness and indentation size effect measurements

Julie Marteau, Maxence Bigerelle, Y. Xia, P.-E. Mazeran, Salima Bouvier

A new method is proposed for the quantification of macroscopic hardness and indentation size effect. This method is based on the simultaneous treatment of several nanoindentation loading curves which are located according to the gap between their shape and the one predicted by the Bernhardt law. By…

Tribology International, 2013, 59, pp.154-162. ⟨10.1016/j.triboint.2012.06.029⟩. ⟨hal-04530460⟩

• Article dans une revue

An expert system to characterise the surfaces morphological properties according to their tribological functionalities: The relevance of a pair of roughness parameters

Maxence Bigerelle, D. Najjar, T. Mathia, Alain Iost, Thierry Coorevits, K. Anselme

Knowing that a surface or profile can be characterized by numerous roughness parameters, the objective of this investigation was to present a methodology which aims to determine quantitatively and without preconceived opinion the most relevant pair of roughness parameters that describe an abraded…

Tribology International, 2013, 59, pp.190-202. ⟨10.1016/J.TRIBOINT.2012.04.027⟩. ⟨hal-01070536⟩

• Chapitre d'ouvrage

Product-driven control: concept, literature review and future trends

André Thomas, Damien Trentesaux

This chapter focuses on the concept of "product-driven control". First, this concept is introduced and the expected advantages and the problems to be solved are described. A brief but representative state of the art is presented. Several product-driven control applications in different…

Theodor Borangiu, André Thomas, Damien Trentesaux. Service Orientation in Holonic and Multi-Agent Manufacturing Control, Springer, pp.390, 2013, Studies in Computational Intelligence, vol. 472, 978-3-642-35851-7. ⟨10.1007/978-3-642-35852-4_9⟩. ⟨hal-00762591⟩