Publications

• Article dans une revue

Machine learning applied in production planning and control: a state-of-the-art in the era of industry 4.0

Juan Pablo Usuga Cadavid, Samir Lamouri, Bernard Grabot, Robert Pellerin, Arnaud Fortin

Because of their cross-functional nature in the company, enhancing Production Planning and Control (PPC) functions can lead to a global improvement of manufacturing systems. With the advent of the Industry 4.0 (I4.0), copious availability of data, high-computing power and large storage capacity…

Journal of Intelligent Manufacturing, 2020, 31 (6), pp.1531-1558. ⟨10.1007/s10845-019-01531-7⟩. ⟨hal-03424530⟩

• Article dans une revue

Analysis of lubricant performance in punching and blanking

Marcel Moghadam, Matteo Villa, Philippe Moreau, André Dubois, Laurent Dubar, Chris V. Nielsen, Niels Bay

Punching and blanking processes are characterized by severe tribological conditions due to the creation of virgin surfaces, which are highly prone to develop pick-up of workpiece material on the punch surface. Hazardous forming lubricants are, therefore, commonly used in punching and blanking…

Tribology International, 2020, 141, pp.105949. ⟨10.1016/j.triboint.2019.105949⟩. ⟨hal-03442244⟩

• Article dans une revue

Lattice Strain Evolutions in Ni-W Alloys during a Tensile Test Combined with Synchrotron X-ray Diffraction

Tarik Sadat, Damien Faurie, Dominique Thiaudière, Cristian Mocuta, David Tingaud, Guy Dirras

Ni and Ni(W) solid solution of bulk Ni and Ni-W alloys (Ni-10W, Ni-30W, and Ni-50W) (wt%) were mechanically compared through the evolution of their {111} X-ray diffraction peaks during in situ tensile tests on the DiffAbs beamline at the Synchrotron SOLEIL. A significant difference in terms of…

Materials, 2020, 13 (18), pp.4027. ⟨10.3390/ma13184027⟩. ⟨hal-03449197⟩

• Communication dans un congrès

The concept of "safety bubble" to build ethical reconfigurable assembly systems

Thierry Berger, Thérèse Bonte, Jean-Jacques Santin, Yves Sallez

In the last decade, Reconfigurable Manufacturing Systems (RMS) have been proposed to deal with mass-customization problems and volatile markets. Applied to the field of assembly, this concept gives rise to Reconfigurable Assembly Systems (RAS). The latter are composed of different basic units (e.g…

21st IFAC world congress, Jul 2020, Berlin, Germany. pp.17023-17028, ⟨10.1016/j.ifacol.2020.12.1487⟩. ⟨hal-03367302⟩

• Article dans une revue

Experimental assessment of the sudden-reversal of the oxygen dilution effect on soot production in coflow ethylene flames II: soot radiation and flame transition analysis

Qianlong Wang, Jean-Louis Consalvi, Céline Morin, Guillaume Legros, Franklin Liu, Weiwei Cai, Haifeng Liu

The current study focuses on the radiative characteristics of heavy smoking flames that are formatted by oxygen being added to the fuel stream of a steady laminar ethylene diffusion flame. In such a scenario, based on the experimental local soot temperature and volume fraction results, the soot…

• Proceedings/Recueil des communications

A Proposal to Model the Monitoring Architecture of a Complex Transportation System.

Issam Mallouk, Thierry Berger, Badr Abou El Majd, Yves Sallez

Enterprises of the transportation sector must face a huge competition. So, an efficient vehicles fleet management is crucial. The present work proposes a generic model adapted to the monitoring of a fleet of vehicles. This model is able to describe the information chain and the different decisional…

Proceedings of SOHOMA 2020, 952, Springer International Publishing, pp.532-542, 2020, Studies in Computational Intelligence. ⟨hal-03403102⟩

• Ouvrages

Droit et robots – Droit science-fictionnel et fictions du droit

Frederique Berrod, Philippe Clermont, Damien Trentesaux

Presses universitaires de Valenciennes, 254 p., 2020, Synergie, 978-2-36424-070-4. ⟨hal-02954281⟩

• Article dans une revue

Study of transient condensation occurring during the starting of the evaporation of a droplet deposited on a heated substrate

Dorra Khilifi, Walid Foudhil, Kamel Fahem, Souad Harmand, Sadok Ben Jabrallah

The evaporation of a drop deposited on a heated substrate is a complex process, which combines several phenomena such as the Marangoni effect, mass and thermal transfers, etc. We developed, in this paper, a mathematical model and a numerical simulation code used to carry out an in-depth study about…

Thermal Science, 2020, 24 (6 Part B), pp.4075-4087. ⟨10.2298/TSCI181122377K⟩. ⟨hal-03579860⟩

• Article dans une revue

Mechanical Integrity of 3D Rough Surfaces during Contact

Maxence Bigerelle, Franck Plouraboué, Frédéric Robache, Abdeljalil Jourani, Agnes Fabre

Rough surfaces are in contact locally by the peaks of roughness. At this local scale, the pressure of contact can be sharply superior to the macroscopic pressure. If the roughness is assumed to be a random morphology, a well-established observation in many practical cases, mechanical indicators…

Coatings, 2019, 10 (1), pp.15. ⟨10.3390/coatings10010015⟩. ⟨hal-02459730⟩

• Thèse

Niveaux d'automatisation adaptables pour une coopération homme-robots, Adaptable levels of automation for human-robots cooperation

Lydia Habib

Nous avons constaté un intérêt considérable pour la robotique de service au fil des années. Les robots sont de plus en plus utilisés pour rendre service aux humains dans différents domaines d’application. Néanmoins, compte tenu de leur capacité limitée, les robots ne peuvent pas répondre à toutes…, We have witnessed a considerable interest in service robotics over the years. The robots are increasingly used to serve humans in various application fields. However, due to their limited capacity, the robots cannot meet all human expectations and the dynamic environment requirements. Robots and…

Interface homme-machine [cs.HC]. Université Polytechnique Hauts-de-France, 2019. Français. ⟨NNT : 2019UPHF0021⟩. ⟨tel-03156295⟩