Publications

• Article dans une revue

A Multiscale Topographical Surface Analysis of High Entropy Alloys Coatings by Laser Melting

Maxence Bigerelle, Anaïs Galliere, Yucelys Santana, Hervé Morvan, Mirentxu Dubar, Jean-François Trelcat, Laurent Boilet, Emmanuel Paris

High Entropy Alloys (HEAs) coatings obtained by laser melting (LM) technique were studied through a multiscale topographical surface analysis using a focus variation microscope. The laser melting creates a multiscale topography from under-powder size (incomplete or complete powder melting) to upper…

Materials, 2023, 16 (2), pp.629. ⟨10.3390/ma16020629⟩. ⟨hal-04489063⟩

• Thèse

Apport de la cohérence intermusculaire pour l'estimation des moments musculaires, Contribution of intermuscular coherence for muscle moment estimations

Emilie Mathieu

L'estimation des moments de force développés par chaque muscle intervenant autour d'une articulation peut permettre d'adapter une rééducation motrice ou un entrainement sportif, de préparer une intervention chirurgicale ou bien encore de piloter des prothèses robotisées. Les mesures…, The estimation of the moments developed by each muscle actuating a joint can allow to adapt motor rehabilitation or sports training, to prepare for surgery or even to control robotic prostheses. Since direct measurements of muscle forces are invasive, biomechanical models have been developed to…

Biotechnologies. Université Polytechnique Hauts-de-France; Institut national des sciences appliquées Hauts-de-France, 2023. Français. ⟨NNT : 2023UPHF0001⟩. ⟨tel-04206903v2⟩

• Article dans une revue

Top-down Determination of Fluctuations in Topographic Measurements

Julie Lemesle, Clement Moreau, Raphael Deltombe, François Blateyron, Joseph Martin, Maxence Bigerelle, Christopher Brown

A top-down method is presented and studied for quantifying topographic map height (z) fluctuations directly from measurements on surfaces of interest. Contrary to bottom-up methods used in dimensional metrology, this method does not require knowledge of transfer functions and fluctuations of an…

Materials, 2023, 16 (2), pp.473. ⟨10.3390/ma16020473⟩. ⟨hal-04489042⟩

• Thèse

Contributions on event-triggering control for systems on arbitrary time domains, Contribution sur la commande à transmissions événementielles pour les systèmes sur un domaine de temps arbitraire

Subham Dey

This thesis deals with designing control algorthms for systems on any arbitrary time domain using the calculus of measure chain theory thereby keeping in mind the issues related to interruption of cummunications, availability of information energy efficiency and safety-critical operation. The…, Cette thèse traite de la conception d'algorithmes de contrôle pour des systèmes sur n'importe quel domaine temporel arbitraire en utilisant le calcul de la théorie de la chaine de mesure, gardant ainsi à l'esprit les problèmes liés à l'interruption des communication à la…

Automatic. Université Polytechnique Hauts-de-France; Institut national des sciences appliquées Hauts-de-France, 2023. English. ⟨NNT : 2023UPHF0005⟩. ⟨tel-04048128⟩

• Pré-publication, Document de travail

Estimating the Gini coefficient of M5S's Rousseau's commentaries

Enka Blanchard

2023. ⟨hal-03921255⟩

• Article dans une revue

Vehicle Actuator Fault Detection With Finite-Frequency Specifications via Takagi-Sugeno Fuzzy Observers: Theory and Experiments

Juntao Pan, Tran Anh-Tu Nguyen, Thierry-Marie Guerra, Chouki Sentouh, Sujun Wang, Jean-Christophe Popieul

Abstract This article investigates the design of Takagi–Sugeno (TS) fuzzy model‐based observers for nonlinear systems with parametric uncertainties and unknown inputs. To address this challenging problem, two observers are constructed in cascade. Based on the sliding mode technique, the first…

IEEE Transactions on Vehicular Technology, 2023, 72 (1), pp.407-417. ⟨10.1109/TVT.2022.3204326⟩. ⟨hal-04278835⟩

• Communication dans un congrès

Coupled experimental and offline simulation study of a helicopter rotor in a frigate airwake with active flow control, Étude expérimentale et simulation hors ligne d'un rotor d'hélicoptère dans le sillage d'une frégate avec contrôle actif de l'écoulement

Elvina Derhille, Quentin Gallas, Luc Bordier, Simon Verley, Laurent Keirsbulck

L’appontage des hélicoptères sur les navires de type frégate demande une forte charge de travail de la part des pilotes. Cet article présente l’effet d’un dispositif de contrôle actif, situé le long des arrêtes du hangar, sur la traction rotor le long d’une trajectoire dans l’axe du navire. Les…

79th Annual Forum & Technology Display, Vertical Flight Society, May 2023, West Palm Beach, United States. ⟨hal-04115646⟩

• Article dans une revue

Design features of the kinematic chain of the ant exoskeleton

Santiago Arroyave-Tobon, Jordin Drapin, Jean-Marc Linares, Pierre Moretto

New challenges in engineering design are about resilience, frugality and sustainability. Nature offers remarkable examples of successful mechanical designs that respond to those constraints. Therefore, biological systems deserve to be explored from a design perspective. The study of design features…

Procedia CIRP, 2023, 119, pp.855-860. ⟨10.1016/j.procir.2023.01.019⟩. ⟨hal-04551171⟩

• Article dans une revue

Martens hardness of Constantan thin films on (100) Si wafer: Improvement in contact area function in nanoindentation

Ayyoub Dziri, Alex Montagne, Francine Roudet, Katir Ziouche, Didier Chicot

This work presents a mechanical study by nanoindentation of Constantan thin films deposited by cathodic sputtering technique with an intermediate thin adhesion layer of titanium on a (100) silicon wafer substrate. A methodology based on a modified contact area function is proposed for a suitable…

Thin Solid Films, 2023, pp.139712. ⟨10.1016/j.tsf.2023.139712⟩. ⟨hal-03951065⟩

• Article dans une revue

A multi-agent system simulation based approach for collision avoidance in integrated Job-Shop Scheduling Problem with transportation tasks

Kader Sanogo, Abdelkader Mekhalef Benhafssa, M’hammed Sahnoun, Belgacem Bettayeb, Moussa Abderrahim, Abdelghani Bekrar

At the operational level of Flexible Manufacturing Systems (FMS), several research works have developed solutions not fully realizable considering the operational constraints, which can be difficult to model. One of the well-known problems in FMS is the Job-Shop Scheduling Problem (JSSP) with…

Journal of Manufacturing Systems, 2023, 68, pp.209-226. ⟨10.1016/j.jmsy.2023.03.011⟩. ⟨hal-04055057⟩