Publications

• Article dans une revue

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin, Nachida Bourabaa, Eric Delacourt, Céline Morin, Xavier Fischer, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents a method to improve cylinder design of 2-stroke auto-ignition engine based on a CFD (Computational Fluid Dynamics) study of internal flows in the chamber and an unsteady global 0D parametric approach. In 2-stroke engine, scavenging process plays an important role regarding…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.69-80. ⟨10.36884/jafm.9.SI1.26397⟩. ⟨hal-01330948⟩

• Article dans une revue

Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling

Mahmoud Charmiyan, Ahmed-Reza Azimian, Laurent Keirsbulck, Ebrahim Shirani, Fethi Aloui

A 3D numerical simulation using large eddy simulation (LES) method is performed for a submerged turbulent water slot jet impinging normally on a flat plate with a nozzle-to-plate distance of 10 jet width and a Reynolds number of 16000 and the results are compared with the existing experimental data…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.11-17. ⟨10.36884/jafm.9.SI1.25825⟩. ⟨hal-03448221⟩

• Article dans une revue

Experimental study on the stability of an impedance-type force-feedback architecture based on an augmented-state observer for a haptic system under time delay using a LMI approach

Quoc Viet Dang, Laurent Vermeiren, Antoine Dequidt, Michel Dambrine

One of the most important performance measures of a haptic interface may be characterized by its behaviour in the implementation of a virtual wall in terms of the biggest value of the virtual stiffness that still leaves the device stable. This value depends on many factors including time delays and…

Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2016, 230 (1), pp.58-71. ⟨10.1177/0959651815611566⟩. ⟨hal-03426981⟩

• Article dans une revue

Modelling Laminate Failure in Composite Materials for Automotive Applications

David Moncayo, F. Köster, Pedro P Camanho, Daniel Coutellier, S. Hartmann

In order to capture the complexity of material failure it is necessary to understand that the performance of FE models depends on a fair use and a fair modeling of composite materials. Based on previous research works, the prognosis capabilities of the current material definitions in LS-DYNA will…

FEA Information Engineering Journal, 2016, 5 (6), pp.1-24. ⟨hal-03445539⟩

• Article dans une revue

A quasi-static 3D model of wheelchair propulsion

Isam Hilal, Philippe Pudlo

The use of theoretical models is an alternative for studying the configuration of manual wheelchairs. Richter and Morrow proposed one of the theoretical models used to study propulsion in manual wheelchairs. However this analytical model is limited to use in the sagittal plane. This article…

International Journal of Human Factors Modelling and Simulation, 2016, 5 (2), pp.136-163. ⟨10.1504/IJHFMS.2015.075361⟩. ⟨hal-03426952⟩

• Article dans une revue

A general variable neighbourhood search for the multi-product inventory routing problem

Anis Mjirda, Bassem Jarboui, Jelena Mladenović, Christophe Wilbaut, Said Hanafi

The inventory routing problem (IRP) deals with the study of the inter-relationship between two important activities in the supply chain: transportation of commodities and inventory management. In this paper, we study a variant of the multi-product IRP and we propose a general variable neighbourhood…

IMA Journal of Management Mathematics, 2016, 27 (1), pp.39-54. ⟨10.1093/imaman/dpu020⟩. ⟨hal-03400808⟩

• Article dans une revue

Editorial: Special issue: Applications of variable neighbourhood search

Nenad Mladenovic, Marìa Belén Meliàn Batista

IMA Journal of Management Mathematics, 2016, 27 (1), pp.1-2. ⟨10.1093/imaman/dpv030⟩. ⟨hal-03670202⟩

• Article dans une revue

Relationship between brightness and roughness of polypropylene abraded surfaces

Adrien van Gorp, Maxence Bigerelle, Denis Najjar

This article proposes to analyze the relation between gloss and roughness of surfaces of polypropylene samples abraded at different magnitudes. Experiments consist of mechanical polishing at different grades, roughness profiles measurement, and specular light reflectometry with three incidence…

Polymer Engineering and Science, 2016, 56 (1), pp.103 - 117. ⟨10.1002/pen.24197⟩. ⟨hal-04530473⟩

• Article dans une revue

Relationship between brightness and roughness of polypropylene abraded surfaces

Adrien van Gorp, Maxence Bigerelle, Denis Najjar

This article proposes to analyze the relation between gloss and roughness of surfaces of polypropylene samples abraded at different magnitudes. Experiments consist of mechanical polishing at different grades, roughness profiles measurement, and specular light reflectometry with three incidence…

Polymer Engineering and Science, 2016, 56 (1), pp.103 - 117. ⟨10.1002/pen.24197⟩. ⟨hal-04530638⟩

• Article dans une revue

Improvement of a non energy-consuming system: A gamma Stirling engine

Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah

In this paper, the classical adiabatic model was chosen. The assumption of perfect gas working fluid was replaced by that of a real gas working fluid. This last assumption was defined by the van der Waals state equation. A Gamma type Stirling engine functioning with a maximum filling pressure of 10…

Environmental Engineering and Management Journal, 2016, 15 (1), pp.133-141. ⟨10.30638/eemj.2016.015⟩. ⟨hal-03448372⟩