Publications

Type of document

Keywords

Author

Of

At

Affichage de 1211 à 1220 sur 2006

Article dans une revue

Relationship between brightness and roughness of polypropylene abraded surfaces

Adrien van Gorp, Maxence Bigerelle, Denis Najjar

This article proposes to analyze the relation between gloss and roughness of surfaces of polypropylene samples abraded at different magnitudes. Experiments consist of mechanical polishing at different grades, roughness profiles measurement, and specular light reflectometry with three incidence…

Polymer Engineering and Science, 2016, 56 (1), pp.103 - 117. ⟨10.1002/pen.24197⟩. ⟨hal-04530473⟩

Article dans une revue

Relationship between brightness and roughness of polypropylene abraded surfaces

Adrien van Gorp, Maxence Bigerelle, Denis Najjar

This article proposes to analyze the relation between gloss and roughness of surfaces of polypropylene samples abraded at different magnitudes. Experiments consist of mechanical polishing at different grades, roughness profiles measurement, and specular light reflectometry with three incidence…

Polymer Engineering and Science, 2016, 56 (1), pp.103 - 117. ⟨10.1002/pen.24197⟩. ⟨hal-04530638⟩

Article dans une revue

Prediction of performance of Stirling engine using least squares support machine technique

Mohammad Hossein Ahmadi, Mohammad Ali Ahmadi, Milad Ashouri, Astarei Razie, Roghayeh Ghasempour, Fethi Aloui

Stirling engine is an environmental friendly heat engine which could reduce CO2 emission through combustion process. Output power, shaft torque and brake specific fuel consumption represent the efficiency and robustness of the Stirling engines. The present research tries to determine the three…

Mechanics & Industry, 2016, 17 (5), pp.506. ⟨10.1051/meca/2015098⟩. ⟨hal-03448100⟩

Article dans une revue

Two-stage heuristic algorithm for the large-scale capacitated location routing problem

Oualid Guemri, Bouziane Beldjilali, Abdelghani Bekrar, Ghalem Belalem

In this paper, we treat the Capacitated Location-Routing Problem(CLRP).TheCLRPwhichcombinesthefacilitylocationproblemwiththeroutingproblem is one of the most important problems in combinatorial optimizationﬁeld. In this study, we propose a new Two Stage Heuristic (2-SH) algorithmfor the large-scale…

International Journal of Mathematical Modelling and Numerical Optimisation, 2016, 7 (1), pp.97. ⟨10.1504/IJMMNO.2016.074375⟩. ⟨hal-03428140⟩

Article dans une revue

Improvement of a non energy-consuming system: A gamma Stirling engine

Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah

In this paper, the classical adiabatic model was chosen. The assumption of perfect gas working fluid was replaced by that of a real gas working fluid. This last assumption was defined by the van der Waals state equation. A Gamma type Stirling engine functioning with a maximum filling pressure of 10…

Environmental Engineering and Management Journal, 2016, 15 (1), pp.133-141. ⟨10.30638/eemj.2016.015⟩. ⟨hal-03448372⟩

Article dans une revue

A new reduced model of scavenging to optimize cylinder design

Stéphanie Cagin, Xavier Fischer, Eric Delacourt, Nachida Bourabaa, Céline Morin, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents the development of a new scavenging model to optimize cylinder design. The developed model explicitly integrates some of the cylinder’s design and environmental variables to describe flows during the scavenging process. Then, based on the reduced model, an optimization phase was…

SIMULATION: Transactions of The Society for Modeling and Simulation International, 2016, 92 (6), pp.507-520. ⟨10.1177/0037549716644516⟩. ⟨hal-01330975⟩

Article dans une revue

Increased antagonist muscle activity in cervical SCI patients suggests altered reciprocal inhibition during elbow contractions

Sylvain Cremoux, David Amarantini, Jessica Tallet, Fabien Dal Maso, Eric Berton

Objective: After spinal cord injury (SCI), the antagonist muscles activation is increased during voluntary contractions and reflex conditioning protocols. This increase can be the result of both muscle atrophy and reciprocal facilitation mechanism. It remains however unclear to what extent…

Clinical Neurophysiology, 2016, 127 (1), pp.629-634. ⟨10.1016/j.clinph.2015.03.016⟩. ⟨hal-01454735⟩

Article dans une revue

Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling

Mahmoud Charmiyan, Ahmed-Reza Azimian, Laurent Keirsbulck, Ebrahim Shirani, Fethi Aloui

A 3D numerical simulation using large eddy simulation (LES) method is performed for a submerged turbulent water slot jet impinging normally on a flat plate with a nozzle-to-plate distance of 10 jet width and a Reynolds number of 16000 and the results are compared with the existing experimental data…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.11-17. ⟨10.36884/jafm.9.SI1.25825⟩. ⟨hal-03448221⟩

Article dans une revue

Experimental study on the stability of an impedance-type force-feedback architecture based on an augmented-state observer for a haptic system under time delay using a LMI approach

Quoc Viet Dang, Laurent Vermeiren, Antoine Dequidt, Michel Dambrine

One of the most important performance measures of a haptic interface may be characterized by its behaviour in the implementation of a virtual wall in terms of the biggest value of the virtual stiffness that still leaves the device stable. This value depends on many factors including time delays and…

Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2016, 230 (1), pp.58-71. ⟨10.1177/0959651815611566⟩. ⟨hal-03426981⟩

Article dans une revue

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin, Nachida Bourabaa, Eric Delacourt, Céline Morin, Xavier Fischer, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents a method to improve cylinder design of 2-stroke auto-ignition engine based on a CFD (Computational Fluid Dynamics) study of internal flows in the chamber and an unsteady global 0D parametric approach. In 2-stroke engine, scavenging process plays an important role regarding…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.69-80. ⟨10.36884/jafm.9.SI1.26397⟩. ⟨hal-01330948⟩