Publications

• Article dans une revue

Experimental assessment of the sudden-reversal of the oxygen dilution effect on soot production in coflow ethylene flames II: soot radiation and flame transition analysis

Qianlong Wang, Jean-Louis Consalvi, Céline Morin, Guillaume Legros, Franklin Liu, Weiwei Cai, Haifeng Liu

The current study focuses on the radiative characteristics of heavy smoking flames that are formatted by oxygen being added to the fuel stream of a steady laminar ethylene diffusion flame. In such a scenario, based on the experimental local soot temperature and volume fraction results, the soot…

• Article dans une revue

Distributed Consensus Observer for Multiagent Systems With High-Order Integrator Dynamics

Zongyu Zuo, Michael Defoort, Bailing Tian, Zhengtao Ding

This article presents a distributed consensus observer for multiagent systems with high-order integrator dynamics to estimate the leader state. Stability analysis is carefully studied to explore the convergence properties under undirected and directed communication, respectively. Using Lyapunov…

IEEE Transactions on Automatic Control, 2020, 65 (4), pp.1771-1778. ⟨10.1109/TAC.2019.2936555⟩. ⟨hal-03424633⟩

• Article dans une revue

Semelles de posture et prévention de la chute chez la personne âgée, Soles for posture and prevention of falls in the elderly person

Frédéric Viseux, Sylvie Villeneuve-Parpay

La chute chez la personne âgée de plus de 60 ans est associée à des déficiences sensorielles, neuromusculaires et ostéo-articulaires. La prise en charge par semelles de posture constitue un atout majeur dans la prévention du risque de chute de nos aînés. Elle fait suite à une investigation…

Revue du Podologue, 2020, 16 (91), pp.17-20. ⟨10.1016/j.revpod.2019.12.008⟩. ⟨hal-03465509⟩

• Article dans une revue

Study of transient condensation occurring during the starting of the evaporation of a droplet deposited on a heated substrate

Dorra Khilifi, Walid Foudhil, Kamel Fahem, Souad Harmand, Sadok Ben Jabrallah

The evaporation of a drop deposited on a heated substrate is a complex process, which combines several phenomena such as the Marangoni effect, mass and thermal transfers, etc. We developed, in this paper, a mathematical model and a numerical simulation code used to carry out an in-depth study about…

Thermal Science, 2020, 24 (6 Part B), pp.4075-4087. ⟨10.2298/TSCI181122377K⟩. ⟨hal-03579860⟩

• Article dans une revue

Lattice Strain Evolutions in Ni-W Alloys during a Tensile Test Combined with Synchrotron X-ray Diffraction

Tarik Sadat, Damien Faurie, Dominique Thiaudière, Cristian Mocuta, David Tingaud, Guy Dirras

Ni and Ni(W) solid solution of bulk Ni and Ni-W alloys (Ni-10W, Ni-30W, and Ni-50W) (wt%) were mechanically compared through the evolution of their {111} X-ray diffraction peaks during in situ tensile tests on the DiffAbs beamline at the Synchrotron SOLEIL. A significant difference in terms of…

Materials, 2020, 13 (18), pp.4027. ⟨10.3390/ma13184027⟩. ⟨hal-03449197⟩

• Article dans une revue

Mechanical Integrity of 3D Rough Surfaces during Contact

Maxence Bigerelle, Franck Plouraboué, Frédéric Robache, Abdeljalil Jourani, Agnes Fabre

Rough surfaces are in contact locally by the peaks of roughness. At this local scale, the pressure of contact can be sharply superior to the macroscopic pressure. If the roughness is assumed to be a random morphology, a well-established observation in many practical cases, mechanical indicators…

Coatings, 2019, 10 (1), pp.15. ⟨10.3390/coatings10010015⟩. ⟨hal-02459730⟩

• Article dans une revue

Unknown Input Observers for Simultaneous Estimation of Vehicle Dynamics and Driver Torque: Theoretical Design and Hardware Experiments

Tran Anh-Tu Nguyen, Thierry-Marie Guerra, Chouki Sentouh, Hui Zhang

This article investigates a new observer design method to estimate simultaneously both the vehicle dynamics and the unknown driver's torque. To take into account the time-varying nature of the longitudinal speed, the vehicle system is transformed into a polytopic linear parameter-varying (LPV…

IEEE/ASME Transactions on Mechatronics, 2019, 24 (6), pp.2508-2518. ⟨10.1109/TMECH.2019.2933744⟩. ⟨hal-03644265⟩

• Article dans une revue

Towards Energy Efficient Scheduling of Manufacturing Systems through Collaboration between Cyber Physical Production and Energy Systems

Maroua Nouiri, Damien Trentesaux, Abdelghani Bekrar

Currently, enhancing sustainability, and in particular reducing energy consumption, is a huge challenge for manufacturing enterprises. The vision of the fourth industrial revolution (so-called "industry 4.0") is not only to optimize production and minimize costs, but also to reduce energy…

Energies, 2019, 12 (23), pp.4448. ⟨10.3390/en12234448⟩. ⟨hal-02386901⟩

• Article dans une revue

CoMM: A consensus algorithm for multi-agent based manufacturing system to deal with perturbation

Tsegay Tesfay Mezgebe, Guillaume Demesure, Hind Bril El Haouzi, Rémi Pannequin, André Thomas

The emergence of Cyber Physical System has dramatically impacted the use of traditionally centralized control system in responding to unexpected events. Rush order is quite common unexpected event in the current dynamic market characteristics and has significant perturbing ability to a centrally…

International Journal of Advanced Manufacturing Technology, 2019, 105 (9), pp.3911-3926. ⟨10.1007/s00170-019-03820-0⟩. ⟨hal-02126766⟩

• Article dans une revue

Cooperative Trajectory Planning for Haptic Shared Control Between Driver and Automation in Highway Driving

Mohamed Amir Benloucif, Tran Anh-Tu Nguyen, Chouki Sentouh, Jean-Christophe Popieul

This paper addresses the driver-automation shared driving control for lane keeping and obstacle avoidance of automated vehicles in highway traffic. The proposed shared control framework is established from a novel cooperative trajectory planning algorithm and a fuzzy steering controller. Based on…

IEEE Transactions on Industrial Electronics, 2019, 66 (12), pp.9846-9857. ⟨10.1109/TIE.2019.2893864⟩. ⟨hal-03644237⟩