Publications

Type of document

Keywords

Author

Of

At

Affichage de 711 à 720 sur 2051

Article dans une revue

Theoretical and numerical study of Couette‐Taylor flow with an axial flow using lattice Boltzmann method

Insaf Mehrez, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah

In this study, the numerical models for swirling flows developed by Li et al and Zhou for lattice Boltzmann method (LBM) are chosen. These models were firstly validated using the Couette-Taylor flow between two concentric cylinders simulations. Numerical results showed the efficiency of the Zhou…

International Journal for Numerical Methods in Fluids, 2019, 90 (9), pp.427-441. ⟨10.1002/fld.4727⟩. ⟨hal-03612765⟩

Article dans une revue

Rib fractures prediction method for kinetic energy projectile impact: from blunt ballistic experiments on SEBS gel to impact modeling on a human torso FE model

Anthony Bracq, Rémi Delille, Christophe Maréchal, Benjamin Bourel, S. Roth, Olivier Mauzac

The present paper aims to assess the risk of rib fractures caused by any rigid less-lethal kinetic energy projectiles. To that end, a coupled experimental and numerical approach is proposed to relate ballistic experiments with the risk of blunt trauma. A polymer gel block is employed as ballistic…

Forensic Science International, 2019, 297, pp.177-183. ⟨10.1016/j.forsciint.2019.02.007⟩. ⟨hal-03516418⟩

Article dans une revue

The role of hydrogen in the nitriding of anatase TiO2 films in the N2-H2 microwave afterglows

Seol Ryu, Yunfei Wang, André Ricard, Jean-Philippe Sarrette, Ansoon Kim, Yu Kwon Kim

Nitriding in the afterglows can be beneficial in the surface-selective nitridation of oxide materials for the control of surface defects or active sites in electronic devices or catalysts. Here we introduce our results on the nitriding of anatase TiO 2 films in the afterglows of N 2 -H 2 microwave…

Surface and Coatings Technology, 2019, 364, pp.341-346. ⟨10.1016/j.surfcoat.2019.03.011⟩. ⟨hal-02555216⟩

Article dans une revue

Optical measurements of temperature fields in sooting flames: influence of soot self-absorption

Qianlong Wang, Guillaume Legros, Céline Morin, Mingfa Yao, Weiwei Cai, Liqiao Jiang

Regular pyrometry techniques have been extensively used to infer the temperature field in sooting flames from soot luminosity. However, correction for soot self-absorption along the line-of-sight needs to be considered. The original contribution of the present paper is to assess both numerical and…

Applied Physics B - Laser and Optics, 2019, 125 (4), pp.63. ⟨10.1007/s00340-019-7179-y⟩. ⟨hal-02127714⟩

Article dans une revue

Effective dynamic selection of smart products scheduling rules in FMS

Wassim Bouazza, Djamila Hamdadou, Yves Sallez, Damien Trentesaux

The present paper addresses the dynamic scheduling problem of smart products in a Flexible Manufacturing System (FMS). Unrelated machines, multiple product families, operation setups and dynamic job arrivals are considered. The goal is to propose a dynamic selection of smart products scheduling…

Manufacturing Letters, 2019, 20, pp.45-48. ⟨10.1016/j.mfglet.2019.05.004⟩. ⟨hal-03426415⟩

Article dans une revue

Information chain modeling from product to stakeholder in the use phase – Application to diagnoses in railway transportation

Vivien Basselot, Thierry Berger, Yves Sallez

In the field of Product Lifecycle Management, the gaps in terms of product usage data collection and exploitation must be addressed. The proposal addresses the modeling of the information chain from the product to the stakeholder. This model considers the product and its context composed of the…

Manufacturing Letters, 2019, 20, pp.22-26. ⟨10.1016/j.mfglet.2019.03.001⟩. ⟨hal-03426755⟩

Article dans une revue

A geometric approach to nonlinear fault detection and isolation in a hybrid three-cell converter

Samir Khelouat, Taous-Meriem Laleg-Kirati, Atallah Benalia, Djamel Boukhetala, Mohamed Djemai

In this paper, the problem of fault detection and isolation in a three-cell converter is investigated using a nonlinear geometric approach. This powerful method based on the unobservability distribution is used to detect and isolate the faulty cell in the three-cell converter. First, a model…

International Journal of Systems Science, 2019, 50 (5), pp.1069-1088. ⟨10.1080/00207721.2019.1588409⟩. ⟨hal-03676735⟩

Article dans une revue

New textile composite solutions for armouring of vehicles

François Boussu, Benjamin Provost, Marie Lefebvre, Daniel Coutellier

In today’s scenario, numerous studies have shown a great interest on 3D woven structures like 3D warp interlock fabric as a fibre reinforcement for composite material to provide a better impact than 2D laminated fabrics with unlinked structures in the thickness. The impact energy absorption…

Advances in Materials Science and Engineering, 2019, 2019, pp.1-14. ⟨10.1155/2019/7938720⟩. ⟨hal-03451536⟩

Article dans une revue

High frequency characterization of a sweeping jet actuator, Charactérisation à haute fréquence d'un jet balayant

Célestin Ott, Quentin Gallas, Jérôme Delva, Marc Lippert, Laurent Keirsbulck

Sweeping jets are an emerging type of actuators that have gained interest due to their potential use in flow control applications. The working principle of these devices is based on the bi-stable attachment of a jet to adjacent walls. They are able to produce unsteady blowing within a wide range of…, Les jets balayants sont des actionneurs fluidiques en pleine extension dans le domaine du contrôle actif des écoulements de par leur large gamme de fréquences et de vitesses. Ils se basent sur le phénomène de bi-stabilité de détachement de l'écoulement sur les parois interne de l'…

Sensors and Actuators A: Physical , 2019, 291, pp.39-47. ⟨10.1016/j.sna.2019.03.034⟩. ⟨hal-02296338⟩

Article dans une revue

Using a Variable Neighborhood Search to Solve the Single Processor Scheduling Problem with Time Restrictions

Rachid Benmansour, Oliver Braun, Said Hanafi, Nenad Mladenovic

We study the single-processor scheduling problem with time restrictions in order to minimize the makespan. In this problem, n independent jobs have to be processed on a single processor, subject only to the following constraint: During any time period of length α>0 the number of jobs being…

Lecture Notes in Computer Science, 2019, Variable Neighborhood Search, 11328, pp.202-215. ⟨10.1007/978-3-030-15843-9_16⟩. ⟨hal-03576798⟩