Publications

Type of document

Keywords

Author

Of

At

Affichage de 831 à 840 sur 2051

Article dans une revue

Design and Control of an Assistive Device for the Study of the Post-stroke Sit-To-Stand Movement

Benyamine Allouche, Amal Saadé, Antoine Dequidt, Laurent Vermeiren, Olivier Rémy-Néris

Every year more than 5 million people worldwide become hemiplegic as a direct consequence of stroke. This neurological deficiency, often leads to a partial or a total loss of standing up abilities and /or ambulation skills. In order to propose new supporting solutions lying between the wheelchair…

Journal of Bionic Engineering, 2018, 15 (4), pp.647-660. ⟨10.1007/s42235-018-0053-5⟩. ⟨hal-03426890⟩

Article dans une revue

Efficient modeling of IEEE 802.11p MAC output process for V2X interworking enhancement

Fatma Salem, Yassin El Hillali, Smail Niar

Vehicle-to-anything (V2X) is a promising communication technology, which expected to revolutionise the ground transportation system by improving traffic safety and efficiency for people on roads. The future deployment of V2X requires interworking between different access technologies, i.e.…

IET Networks, 2018, Traffic Engineering and Optimisation in Next Generation Networks, 7 (4), pp.210-219. ⟨10.1049/iet-net.2017.0228⟩. ⟨hal-03183480⟩

Article dans une revue

Virtual strain gauge based on a fuzzy discrete angular domain observer: Application to engine and clutch torque estimation issues

Rémi Losero, Jimmy Lauber, Thierry-Marie Guerra

In many real time applications, information of transmitted torque is a mandatory input of the embedded control strategies. In the most of cases, the use of a physical torque sensor (strain gauge) is compromised by cost and bulk reasons and the torque is not measured. Unfortunately, the need of an…

Fuzzy Sets and Systems, 2018, 343, pp.76-96. ⟨10.1016/j.fss.2018.02.016⟩. ⟨hal-03428137⟩

Article dans une revue

Matheuristics based on iterative linear programming and slope scaling for multicommodity capacitated fixed charge network design

Bernard Gendron, Said Hanafi, Raca Todosijević

We present new matheuristics for the multicommodity capacitated fixed-charge network design problem (MCND). The matheuristics are based on combining iterative linear programming (ILP) methods and slope scaling (SS) heuristics. Each iteration alternates between solving a linear program obtained by…

European Journal of Operational Research, 2018, 268 (1), pp.70-81. ⟨10.1016/j.ejor.2018.01.022⟩. ⟨hal-03400567⟩

Article dans une revue

On the Employment of Unpunctured Turbo-Trellis Coded Modulation Channel Coding to Improve the Performance of WiMax System

Mohamed Reda Lahcene, Abdesselam Bassou, Mohammed Beladgham, Abdelmalik Taleb-Ahmed

The wireless communications evolved considerably in the last few years. This fact encouraged the deployment of several systems or cellular networks in multi technological environment. Worldwide Interoperability for Microwave Access (WiMax) is an emerging standard for next generation wireless…

International Journal on Communications Antenna and Propagation, 2018, 8 (3), pp.248. ⟨10.15866/irecap.v8i3.13609⟩. ⟨hal-03675846⟩

Article dans une revue

A New Construction of Optical Zero-Correlation Zone Codes

Benattou Fassi, Abdelmalik Taleb-Ahmed

A new method for constructing optical zero-correlation zone (OZCZ) codes based on the Hadamard matrix and the concatenation operation is proposed. The most important property of the obtained codes is that the periodic correlation function of the proposed codes is zero for the phase shifts within…

Journal of Optical Communications and Networking, 2018, 39 (3), pp.359-368. ⟨10.1515/joc-2017-0214⟩. ⟨hal-03674620⟩

Article dans une revue

New environmentally friendly coatings for hot forging tools

André Dubois, Mirentxu Dubar, Colin Debras, Kurt Hermange, Christelle Nivot, Christian Courtois

Two alumina coatings are developed to protect tool surface in hot forging: pure γ-alumina matrix loaded with α-alumina particles and pure γ-alumina matrix loaded with h-BN particles. The coatings are deposited on stainless tools by using a sol-gel procedure. Adherent coatings are obtained with an…

Surface and Coatings Technology, 2018, 344, pp.342-352. ⟨10.1016/j.surfcoat.2018.03.055⟩. ⟨hal-02909709⟩

Article dans une revue

Bending analysis of planar structures made of functionally graded material by a meshless method

Jiao Li, Jun Lin, Yanjin Guan, Guangchun Wang, Hakim Naceur

A meshless Smoothed Hydrodynamic Particle (SPH) model is established to simulate the bending deformation of 2D structures made of Functionally Graded Materials (FGMs). The material property is assumed to be varied continuously through the thickness direction according to the power-law distribution…

Ferroelectrics, 2018, 527 (1), pp.85-92. ⟨10.1080/00150193.2018.1450509⟩. ⟨hal-03450705⟩

Article dans une revue

Meshless modelling of low-velocity impacting damage for composite laminates

Jun Lin, Yanjin Guan, Jiao Li, Liang Huang, Hakim Naceur, Daniel Coutellier

The aim of this paper is to predict the low velocity impact damage in composite laminates through meshless Smoothed Particle Hydrodynamics (SPH) method. SPH shell model is developed based on the First-Order Shear Deformation Theory as well as explicit time integration using central difference…

Ferroelectrics, 2018, 527 (1), pp.93-106. ⟨10.1080/00150193.2018.1450543⟩. ⟨hal-03450097⟩

Article dans une revue

Arm-trunk coordination in wheelchair initiation displacement

Soufien Chikh, Cyril Garnier, Arnaud Faupin, Antonio Pinti, Samuel Boudet, Fairouz Azaiez, Eric Watelain

Arm-trunk coordination during the initiation of displacement in manual wheelchair is a complex task. The objective of this work is to study the arm-trunk coordination by measuring anticipatory and compensatory postural adjustments. Nine healthy subjects participated in the study after being trained…

Journal of Electromyography and Kinesiology, 2018, 40, pp.16-22. ⟨10.1016/j.jelekin.2018.03.001⟩. ⟨hal-03027991⟩