Publications

• REPORT

Modélisation macroscopique d’un assemblage soudé 3 tôles multi-matériaux

Nicolas Leconte, Rim Chtourou, Tuan Hung Nguyen, Eric Markiewicz, Fahmi Chaari, Grégory Haugou

[Rapport de recherche] Rapport projet ANR ASAP, LAMIH, Valenciennes. 2016. ⟨hal-03442603⟩

• ART

Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling

Mahmoud Charmiyan, Ahmed-Reza Azimian, Laurent Keirsbulck, Ebrahim Shirani, Fethi Aloui

A 3D numerical simulation using large eddy simulation (LES) method is performed for a submerged turbulent water slot jet impinging normally on a flat plate with a nozzle-to-plate distance of 10 jet width and a Reynolds number of 16000 and the results are compared with the existing experimental data…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.11-17. ⟨10.36884/jafm.9.SI1.25825⟩. ⟨hal-03448221⟩

• COUV

Measurements of dynamic properties of ballistic yarns using innovative testing devices

Caroline Chevalier, Christophe Kerisit, Andreas Klavzar, François Boussu, Daniel Coutellier

This chapter highlights the influence of the dynamic characteristic of yarn on the ballistic performance of fabric submitted to impact. A brief review of existing research works done on the dynamic tensile test known as the Hopkinson bar, and more recently the Split Flying Bar, is presented. A new…

Advanced Fibrous Composite Materials for Ballistic Protection, Elsevier, pp.199-215, 2016, 978-178242461-1. ⟨10.1016/B978-1-78242-461-1.00007-8⟩. ⟨hal-03667392⟩

• COMM

Maintenance decision support for sustainable performance: problems and research directions at the crossroads of health management and eco-design

Olivier Sénéchal

Despite companies progressively taking sustainable performance into account through various governmental incentives and policies, most still have their own strategic, tactical or operational targets based essentially on economic criteria (turnover, productivity, inventory valuation...). Since the…

3rd IFAC Workshop on Advanced Maintenance Engineering, Services and Technology AMEST 2016, Oct 2016, Biarritz, France. pp.85-90, ⟨10.1016/j.ifacol.2016.11.015⟩. ⟨hal-03416145⟩

• COUV

Arezzo: an emulator for the bench4star initiative

Thierry Berger, Dominique Deneux, Thérèse Bonte, Etienne Cocquebert, Damien Trentesaux

Fischer X., Daidie A., Eynard B., Paredes M. Research in Interactive Design, 4, Springer, pp. 530-536, 2016, 978-3-319-26119-5. ⟨hal-03406808⟩

• COMM

HCI Engineering Integrated with Capability Maturity Models

Taisa Guidini Gonçalves, Káthia Marçal de Oliveira, Christophe Kolski

Even though coming from different communities, Software Engineering (SE) and Human-Computer Interaction (HCI) engineering have similar goals: the definition of methods, techniques and standards to support the development of software systems, and, in particular for HCI, of interactive systems.…

10th International Conference on Research Challenges in Information Science, IEEE RCIS 2016, Institute of Electrical and Electronics Engineers (IEEE), May 2016, Grenoble, France. pp.633-644, ⟨10.1109/RCIS.2016.7549319⟩. ⟨hal-03350385⟩

• ART

Experimental study on the stability of an impedance-type force-feedback architecture based on an augmented-state observer for a haptic system under time delay using a LMI approach

Quoc Viet Dang, Laurent Vermeiren, Antoine Dequidt, Michel Dambrine

One of the most important performance measures of a haptic interface may be characterized by its behaviour in the implementation of a virtual wall in terms of the biggest value of the virtual stiffness that still leaves the device stable. This value depends on many factors including time delays and…

Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2016, 230 (1), pp.58-71. ⟨10.1177/0959651815611566⟩. ⟨hal-03426981⟩

• ART

Turbulent Flows Structures Crossing Conical Diffusers: Angle Effect Analysis using PIV Technique and POD for Post-Processing

Emna Berrich, Fethi Aloui, D Pierrat, L Gros, Anthony Couzinet, Jack Legrand

In this work, we investigated experimentally the hydrodynamics of flows crossing conical diffusers. On our previous work (Aloui et al., 2011), CFD turbulent models were validated for flows crossing the critical angle (2α=16°). Indeed, the PIV data base constructed was exploited to validate a…

Journal of Applied Fluid Mechanics, 2016, 9 (Special Issue 1), pp.19-29. ⟨10.36884/JAFM.9.SI1.25827⟩. ⟨hal-01349723⟩

• REPORT

Pistes d’amélioration d’un siège d’avion pour passager à mobilité réduite

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2016. ⟨hal-03420631⟩

• COMM

Towards a context based Evaluation Support System for Quality in Use assessment of mobile systems

Emna Ben Ayed, Rim Magdich, Christophe Kolski, Houcine Ezzedine

Mobile applications, which introduce a new style of interaction between the final user and the mobile systems, are used in different contexts of use. So, a context based evaluation of the Quality in Use (QinU) of such systems becomes required. In this work, we present a method towards supporting…

IEEE International Conference on Systems, Man and Cybernetics (SMC 2016), Institute of Electrical and Electronics Engineers (IEEE), Oct 2016, Budapest, Hungary. pp.4350-4355, ⟨10.1109/SMC.2016.7844915⟩. ⟨hal-03350098⟩