Publications

Type of document

Keywords

Author

Of

At

Affichage de 3571 à 3580 sur 5587

Communication dans un congrès

Impact d'un sommet de côte et de ses aménagements sur le comportement et la réactivité cardiaque d'un conducteur à l'approche

Janick Naveteur, Jean Michel Auberlet, Julie Paxion, Florence Rosey, Françoise Anceaux, Marie-Pierre Pacaux-Lemoine

Questionnant la pertinence d'une approche psychophysiologique à l'analyse des situations, l'étude porte sur la conduite automobile. Centrée sur le franchissement de sommet de côte, elle est réalisée en simulateur, avec un parcours reproduisant le relief d'une route réelle. La…

8ème conférence de Psychologie Ergonomique (EPIQUE), Jul 2015, Aix en Provence, France. 12p. ⟨hal-01206186⟩

Article dans une revue

Bilateral Strength Deficit Is Not Neural in Origin; Rather Due to Dynamometer Mechanical Configuration

Emilie Simoneau-Buessinger, Sebastien Leteneur, Anis Toumi, Alexandra Dessurne, François Gabrielli, Franck Barbier, Jennifer Jakobi

During maximal contractions, the sum of forces exerted by homonymous muscles unilaterally is typically higher than the sum of forces exerted by the same muscles bilaterally. However, the underlying mechanism(s) of this phenomenon, which is known as the bilateral strength deficit, remain equivocal.…

PLoS ONE, 2015, 10 (12), pp.e0145077. ⟨10.1371/journal.pone.0145077⟩. ⟨hal-03464838⟩

Article dans une revue

Specialized Reduced Models of Dynamic Flows in 2-Stroke Engines

Stéphanie Cagin, Xavier Fischer, Eric Delacourt, Nachida Bourabaa, Céline Morin, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

The complexity of scavenging by ports and its impact on engine efficiency create the need to understand and to model it as realistically as possible. However, there are few empirical scavenging models and these are highly specialized. In a design optimization process, they appear very restricted…

International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 2015, 9 (9), pp.1684 - 1693. ⟨10.5281/zenodo.1124187⟩. ⟨hal-01330965⟩

Communication dans un congrès

A viscoelastic-viscoplastic model for short-fibre reinforced polymers with complex fibre orientations

Mariem Nciri, Delphine Notta-Cuvier, Franck Lauro, Fahmi Chaari, Bassem Zouari, Yamen Maalej

This paper presents an innovative approach for the modelling of viscous behaviour of short-fibre reinforced composites (SFRC) with complex distributions of fibre orientations and for a wide range of strain rates. As an alternative to more complex homogenisation methods, the model is based on an…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.04008, ⟨10.1051/epjconf/20159404008⟩. ⟨hal-03433232⟩

Communication dans un congrès

Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint

Julien Carrier, Eric Markiewicz, Grégory Haugou, David Lebaillif, Nicolas Leconte, Hakim Naceur

Welded joints, due to their manufacturing process, are commonly weakened areas. This study analyses the dynamic behavior of the Base Metal (BM) and the Heat-Affected Zone (HAZ) of an HSS (High Strength Steel) fillet welded joint. Firstly, a specific approach has been developed to generate the HAZ…

CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-03446151⟩

Ouvrages

Cyberdéfense La sécurité de l'informatique industrielle (domotique, industrie, transports)

Joffrey Clarhaut, Nicolas Dupoty, Franck Ebel, Jérôme Hennecart, Frédéric Vicogne

Ce livre sur la cyberdéfense s'adresse à toute personne sensibilisée au concept de la sécurité dans le domaine industriel. Il a pour objectif d'initier le lecteur aux techniques les plus courantes des attaquants pour lui apprendre comment se défendre. En effet, si la sécurité de l'…

E. N. I. Editions, 2015, 978-2-7460-9917-3. ⟨hal-03420348⟩

Communication dans un congrès

Towards a Framework for Integration of Requirements Engineering in PLM

Albéric Cornière, Virginie Fortineau, Thomas Paviot, Samir Lamouri

Requirements Engineering is often seen as the process starting with the expression of requirements from stakeholders that aims to provide a coherent set of specifications, thus a starting point in the life cycle of a product. In a PLM context, managing the products data in order to prepare for the…

15th IFAC Symposium on Information Control Problems in Manufacturing, May 2015, Ottawa, Canada. pp.283-287, ⟨10.1016/j.ifacol.2015.06.095⟩. ⟨hal-03416997⟩

Communication dans un congrès

Dynamic recrystallization observed at the tool/chip interface in machining

Yannick Senecaut, Michel Watremez, Julien Brocail, Laurence Fouilland-Paille, Laurent Dubar

In numerical approaches for high speed machining, the rheological behavior of machined materials is usually described by a Johnson Cook law. However, studies have shown that dynamic recrystallization phenomena appear during machining in the tool/chip interface. The Johnson Cook constitutive law…

ESAFORM 2015, Apr 2015, Graz, Austria. pp.1223-1228, ⟨10.4028/www.scientific.net/KEM.651-653.1223⟩. ⟨hal-01178171⟩

Article dans une revue

Experimental study of oil cooling systems for electric motors

Tanguy Davin, Julien Pellé, Souad Harmand, Robert Yu

The present study focuses on the use of lubricating oil as a coolant for electrical motors. Oil is introduced at each side of a 40 kW test machine to directly cool the stator coil end-windings. An experimental setup has been implemented to test different oil injection patterns. The influence of the…

Applied Thermal Engineering, 2015, 75, pp.1-13. ⟨10.1016/j.applthermaleng.2014.10.060⟩. ⟨hal-03452082⟩

Communication dans un congrès

Region of exponential stability of switched linear systems on time scales

Fatima Zohra Taousser, Michael Defoort, Mohamed Djemai

This paper deals with the stability analysis of a class of linear time-invariant switched systems on non-uniform time domains. The considered class consists of a set of linear continuous-time and linear discrete-time subsystems. Some sufficient and necessary conditions are derived to guarantee the…

Analysis and Design of Hybrid Systems ADHS, Oct 2015, Atlanta, GA, United States. pp.93-98, ⟨10.1016/j.ifacol.2015.11.158⟩. ⟨hal-03659525⟩