Publications

• Article dans une revue

Évaluation de requêtes mobiles basée sur une infrastructure de services

Marie Thilliez, Mikael Desertot

Revue des Sciences et Technologies de l'Information - Série ISI : Ingénierie des Systèmes d'Information, 2013, Numéro Spécial "Social, Localisation et Mobilité : de nouveaux enjeux pour la gestion des données", 18 (1), pp.107-123. ⟨hal-03517866⟩

• Article dans une revue

Embedded Holonic Fault Diagnosis of Complex Transportation Systems

Antoine Le Mortellec, Joffrey Clarhaut, Yves Sallez, Thierry Berger, Damien Trentesaux

The use of electronic equipment and embedded computing technologies in modern complex transportation systems continues to grow in a highly competitive market, in which product maintainability and availability is vital. These technological advances also make fault diagnosis and maintenance…

Engineering Applications of Artificial Intelligence, 2013, 26 (1), pp.227-240. ⟨10.1016/j.engappai.2012.09.008⟩. ⟨hal-03041257⟩

• Article dans une revue

Experimental validation and critical analysis of inverse method in mass transfer using electrochemical sensor

Emna Berrich, Fethi Aloui, Jack Legrand

Rehimi et al. [1] numerically studied the frequency response of an electrochemical probe. They applied an inverse sequential algorithm of the convection diffusion equation to simulated periodic mass transfer signals in order to determine the wall shear rate. This paper presents an experimental…

Experimental Thermal and Fluid Science, 2013, 44, pp. 253-263. ⟨10.1016/j.expthermflusci.2012.07.001⟩. ⟨hal-03520746⟩

• Communication dans un congrès

Intelligent Products: A Spinal Column to Handle Information Exchanges in Supply Chains

Damien Trentesaux, Bernard Grabot, Yves Sallez

This paper outlines some practical problems linked to information exchange occurring in nowadays supply chains, with a special emphasis on the aeronautical sector. The Intelligent Product paradigm is presented as an adequate solution to address some of these problems and to provide rapid gains…

20th Advances in Production Management Systems (APMS), Sep 2013, State College, PA, United States. pp.452-459, ⟨10.1007/978-3-642-41263-9_56⟩. ⟨hal-01449753⟩

• Article dans une revue

Influence of the roughness of sandblasted surface on the measurement of hardness by nanoindentation, Influence de l’amplitude de la rugosité de surfaces sablées sur la mesure de dureté par nanoindentation

Hsin Shen Ho, Yang Xia, Julie Marteau, Maxence Bigerelle

Nanoindentation tests are often used to characterize the surface mechanical properties of materials. However, this technique lacks repeatability: when different zones of the same specimen are tested, there can be large differences between the nanoindentation curves. One of the main causes is the…, Les essais de nanoindentation sont souvent utilisés pour caractériser les propriétés mécaniques des matériaux en proche surface. Cependant, cette technique manque de reproductibilité : une même réponse mécanique est difficilement obtenue par les essais de nanoindentation sur différentes zones de la…

Matériaux et Techniques, 2013, 101 (3), pp.305. ⟨10.1051/mattech/2013070⟩. ⟨hal-02968730⟩

• Communication dans un congrès

Ankle joint moment is substantially underestimated when measured with classical ergometers mounted with a uni-dimensional force sensor

Emilie Simoneau-Buessinger, Anis Toumi, Christophe Gillet, Sebastien Leteneur

XVIIIth Annual Congress of the European College of Sport Sciences (ECSS), Jan 2013, Barcelone, Spain. ⟨hal-03533968⟩

• Article dans une revue

L'effet de deux types d'entrainement sur la vitesse de marche des personnes âgées MCI

L. Combourieu, Alexandra Perrot, F. Bloch, Eric Watelain, M.-L. Seux, G. Kemoun

Neurophysiologie Clinique = Clinical Neurophysiology, 2013, 44 (1), pp.122-123. ⟨10.1016/j.neucli.2013.10.045⟩. ⟨hal-03534129⟩

• Article dans une revue

Benchmarking Flexible Job-Shop Scheduling and Control Systems

Damien Trentesaux, Cyrille Pach, Abdelghani Bekrar, Yves Sallez, Thierry Berger, Thérèse Bonte, Paulo Leitão, José Barbosa

Benchmarking is comparing the output of different systems for a given set of input data in order to improve the system's performance. Faced with the lack of realistic and operational benchmarks that can be used for testing optimization methods and control systems in flexible systems, this…

Control Engineering Practice, 2013, 21 (9), pp.1204-1225. ⟨10.1016/j.conengprac.2013.05.004⟩. ⟨hal-03405597⟩

• Article dans une revue

Using the BCD model for risk analysis

Karima Sedki, Philippe Polet, Frédéric Vanderhaegen

In this paper, we are interested in addressing risk analysis. We propose an influence diagram-based approach that focuses on a Benefit, Cost, Deficit (BCD) model. The BCD model is proposed for studying the intentional deviant behaviors of human operators in a system. In this model, the consequences…

Engineering Applications of Artificial Intelligence, 2013, 26 (9), pp.2172-2183. ⟨10.1016/j.engappai.2013.06.009⟩. ⟨hal-03405576⟩

• Article dans une revue

Sharing with Caution: Managing Parking Spaces in Vehicular Networks

Thierry Delot, Sergio Ilarri, Sylvain Lecomte, Nicolas Cenerario

By exchanging events in a vehicular ad hoc network (VANET), drivers can receive interesting information while driving. For example, they can be informed of available parking spaces in their vicinity. A suitable protocol is needed to disseminate the events efficiently within the area where they are…

Mobile Information Systems, 2013, 9 (1), pp.69-98. ⟨10.1155/2013/703830⟩. ⟨hal-03594510⟩