Publications

• Article dans une revue

Benchmarking Flexible Job-Shop Scheduling and Control Systems

Damien Trentesaux, Cyrille Pach, Abdelghani Bekrar, Yves Sallez, Thierry Berger, Thérèse Bonte, Paulo Leitão, José Barbosa

Benchmarking is comparing the output of different systems for a given set of input data in order to improve the system's performance. Faced with the lack of realistic and operational benchmarks that can be used for testing optimization methods and control systems in flexible systems, this…

Control Engineering Practice, 2013, 21 (9), pp.1204-1225. ⟨10.1016/j.conengprac.2013.05.004⟩. ⟨hal-03405597⟩

• Article dans une revue

Using the BCD model for risk analysis

Karima Sedki, Philippe Polet, Frédéric Vanderhaegen

In this paper, we are interested in addressing risk analysis. We propose an influence diagram-based approach that focuses on a Benefit, Cost, Deficit (BCD) model. The BCD model is proposed for studying the intentional deviant behaviors of human operators in a system. In this model, the consequences…

Engineering Applications of Artificial Intelligence, 2013, 26 (9), pp.2172-2183. ⟨10.1016/j.engappai.2013.06.009⟩. ⟨hal-03405576⟩

• Article dans une revue

Sharing with Caution: Managing Parking Spaces in Vehicular Networks

Thierry Delot, Sergio Ilarri, Sylvain Lecomte, Nicolas Cenerario

By exchanging events in a vehicular ad hoc network (VANET), drivers can receive interesting information while driving. For example, they can be informed of available parking spaces in their vicinity. A suitable protocol is needed to disseminate the events efficiently within the area where they are…

Mobile Information Systems, 2013, 9 (1), pp.69-98. ⟨10.1155/2013/703830⟩. ⟨hal-03594510⟩

• Communication dans un congrès

Activation of the following mode to simulate heterogeneous pedestrian behavior in crowded environment

Laure Bourgois, Thomas Heckmann, Emmanuelle Grislin-Le Strugeon, Jean Michel Auberlet

To simulate pedestrian crowds, most of the current studies use the microscopic approach, in which the pedestrian is modeled as an individual entity. With the microscopic approach, the heterogeneity in the pedestrian population is mostly based on inter-individual difference in the agent model…

International Conference on Agents and Artificial Intelligence (ICAART), Feb 2013, Spain. 6p. ⟨hal-00858151⟩

• Article dans une revue

Analysis of inverse method applied on sandwich probes

Emna Berrich, Fethi Aloui, Jack Legrand

Parallel plate disks (PPD) are often used for analyzing the effect of small amplitude oscillations with different frequencies. These devices allow the imposing of a well-known flow kinematics. Mass transfer problems and, particularly, convection-diffusion problems relating wall shear rate to mass…

Journal of Fluids Engineering, 2013, 135 (1), ⟨10.1115/1.4007888⟩. ⟨hal-03521107⟩

• Article dans une revue

Evaluation of wrist guard effectiveness for snowboarders

Coralie Thoraval, Audrey Hault-Dubrulle, Pascal Drazetic, Hervé Morvan, Charlie Barla

Computer Methods in Biomechanics and Biomedical Engineering, 2013, 16 (sup 1), ⟨10.1080/10255842.2013.815872⟩. ⟨hal-03524157⟩

• Article dans une revue

A new automatic image registration algorithm based on corner detector for remote sensing applications

Lila Meddeber, Tarik Zouagui, Abdelmalik Taleb-Ahmed, Nassreddine Berrached

In this paper, we propose a new automatic satellite image registration approach capable of handling remotely sensed images geometrically distorted by various transformations such as translation, rotation, and shear. This technique exploits the invariant relations between regions of a reference…

International Review on Computers and Software (IRECOS), 2013, 8 (1), pp.347-352. ⟨hal-03508271⟩

• Article dans une revue

3D Modelling of Thermal Replication for Designing Progressive Glass Moulds

Dominique Lochegnies, Philippe Moreau, Fabienne Hanriot, Patrick Hugonneaux

Worldwide, ESSILOR International provides customers with Progressive Addition Lenses (PAL), which replace bifocal lenses. Thermal replication is one process to produce glass moulds for PAL, using sagged glass on a ceramic slumping block. In this paper, thermal replication for producing PAL glass…

New Journal of Glass and Ceramics, 2013, 3 (1), pp.34-42. ⟨10.4236/njgc.2013.31006⟩. ⟨hal-03523040⟩

• Communication dans un congrès

Towards large time simulation reduction for the solving of mechanical contact (large scale) problems: A robust control approach

Antonio Gonzalez Sorribes, Jimmy Lauber, Thierry-Marie Guerra, Franck Massa, Thierry Tison

The evolution of computational resources contributes to the use, more and more frequent, of mechanical contact in numerical models. The main difficulty is to determine rapidly the contact loads which allow balancing two structures, modeled by the finite element method. This problem is reported to…

3rd IFAC Conference on Intelligent Control and Automation Science, ICONS 2013, Sep 2013, Chengdu, China. pp.417-422, ⟨10.3182/20130902-3-CN-3020.00183⟩. ⟨hal-03615281⟩

• Chapitre d'ouvrage

FEM Simulation Based on CAD Model Simplification: A Comparison Study between the Hybrid Method and the Technique Using a Removing Details

Mounir Hamdi, Nizar Aifaoui, Borhen Louhichi, Abdelmajid Benamara, Dominique Deneux

The simulation process is currently used in the design and dimensioning of mechanical parts. With the progress of computer materials, the Finite Elements Method (FEM) becomes the most used approach in the simulation of mechanical behavior. The simulation process needs multiple Design-FEM loops. In…

Design and Modeling of Mechanical Systems, Springer Berlin Heidelberg, pp.587-596, 2013, Lecture Notes in Mechanical Engineering, ⟨10.1007/978-3-642-37143-1_70⟩. ⟨hal-03621588⟩