Souad
HARMAND

Aziza H., Boubaker R., Iwata N., Dupont V., Harmand S. (2025). Assessment of thermal performance in novel pulsating heat pipes for cooling a five-phase permanent magnet synchronous machine. Applied Thermal Engineering, 274, pp. 126662 [DOI=https://doi.org/10.1016/j.applthermaleng.2025.126662].

Briache A., Mahdaoui M., Boubaker R., Ouardouz M., Ahachad M., Harmand S. (2025). A comparative analysis of enhancement techniques for latent energy storage systems. International Journal of Heat and Mass Transfer, 248, pp. 127224 [DOI=https://doi.org/10.1016/j.ijheatmasstransfer.2025.127224].

Maddumage W., Ouenzerfi S., Harmand S., Cairns A., Paykani A. (2025). Thermal management of hairpin winding traction motors in electric vehicles: Parametric evaluation of impinging oil jet cooling using CFD simulations. Applied Thermal Engineering, 273, pp. 126414 [DOI=https://doi.org/10.1016/j.applthermaleng.2025.126414].

Boubaker R., Lorgouilloux Y., Ouenzerfi S., Harmand S. (2024). Experimental study of a bilayer ceramic wick for the evaporator of a two-phase heat transfer device. International Journal of Heat and Mass Transfer, 228, pp. 125609 [DOI=https://doi.org/10.1016/j.ijheatmasstransfer.2024.125609].

Said M., Bouda N., Harmand S. (2024). 3D Numerical Investigation of Heat Transfer Performance in Liquid-liquid Taylor Flow. Journal of Applied and Computational Mechanics, 10, pp. 183-204 [DOI=10.22055/JACM.2023.44421.4211].

Foudhil W., Khilifi D., Dutil Y., Harmand S., Ben jabrallah S. (2023). Experimental and Three-Dimensional Numerical Study of the Single/Multiple Sessile Droplets Evaporation. Heat Transfer Engineering, 44(20), pp. 1926-1945 [DOI=https://doi.org/10.1080/01457632.2022.2162009].

Said M., Bouda N., Harmand S. (2023). A Comparative Study of Two Numerical Methods Applied for 3D Liquid-Liquid Taylor Flow in a Microchannel. Journal of Applied Fluid Mechanics, 17, pp. 1-18 [DOI=10.47176/JAFM.17.1.2157].

Jaber A., Vayron R., Harmand S. (2023). Healthy and Pathological Porcine Blood Drop Evaporation: Effect of the Temperature. ACS Publications langmuir. [IF=4.331] [DOI=https://doi.org/10.1021/acs.langmuir.3c00061].

Said M., Bouda N., Harmand S. (2023). Numerical Investigation of Flow Patterns and Plug Hydrodynamics in a 3D T-junction Microchannel. Microgravity Science and Technology, 35, pp. 8. [IF=1.982] [DOI=https://doi.org/10.1007/s12217-022-10026-9].

Chen P., Ben hassine N., Ouenzerfi S., Harmand S. (2023). Experimental and numerical study of stator end-winding cooling with impinging oil jet. Applied Thermal Engineering, 220, pp. 119702. [IF=6.465] [DOI=https://doi.org/10.1016/j.applthermaleng.2022.119702].

Haidar C., El hannaoui A., Boutarfa R., Harmand S. (2023). Flow and Convective Exchanges Study in Rotor-Stator System With Eccentric Impinging Jet. ASME Journal of Heat and Mass Transfer, pp. 1-28. [IF=2.021] [DOI=https://doi.org/10.1115/1.4056689].

Foudhil W., Khilifi D., Dutil Y., Harmand S., Ben jabralah S. (2022). Experimental and Three-Dimensional Numerical Study of the Single/Multiple Sessile Droplets Evaporation. Heat Transfer Engineering, pp. 1-34. [IF=2.172] [DOI=https://doi.org/10.1080/01457632.2022.2162009].

Jaber A., Vayron R., Harmand S. (2022). Effect of temperature on evaporation dynamics of sheep's blood droplets and topographic analysis of induced patterns. Heliyon, 8, pp. 11258. [IF=3.776] [DOI=https://doi.org/10.1016/j.heliyon.2022.e11258].

Uddin Z., Hassan H., Harmand S., Ibrahim W. (2022). Soft computing and statistical approach for sensitivity analysis of heat transfer through the hybrid nanoliquid film in rotating heat pipe. Scientific Reports, 12, pp. 14983. [IF=4.996] [DOI=https://doi.org/10.1038/s41598-022-18736-1].

Sefiane K., Christy J., Duursma G., Ebeling J., Seewald T., Harmand S. (2022). Flow and heat measurement within self-rewetting mixtures of 1-pentanol and water drops. International Journal of Thermal Sciences, 176, pp. 107532. [IF=3.744] [DOI=https://doi.org/10.1016/j.ijthermalsci.2022.107532].

Thati L., Zaaroura I., Toubal M., Smagin N., Harmand S., Carlier J., Alouani I. (2022). Toward a Reliable Estimation of Fluid Concentration Using High Frequency Acoustic Waves: A Machine Learning Approach. IEEE Sensors Journal, 22, pp. 8772-8780. [IF=4.61] [DOI=10.1109/JSEN.2022.3161380].

Nazari M., Rashidi S., Esfahani J., Harmand S. (2022). A novel electrokinetic micromixing system with conductive mixing-enclosure-A geometrical study. Journal of Heat and Mass Transfer Research, 9, pp. 65-67. [IF=0.88] [DOI=10.22075/JHMTR.2022.21707.1314].

Brik M., Harmand S., Zaaroura I. (2021). Relaxation and contact angle dynamics during the coalescence of different sized vertically aligned water drops in different silicone oil viscosities. Colloids and Surfaces A:Physicochemical and Engineering Aspects, 629, pp. 127429. [IF=4.539] [DOI=https://doi.org/10.1016/j.colsurfa.2021.127429].

Zaaroura I., Toubal M., Carlier J., Harmand S., Nongaillard B. (2021). Nanofluids dynamic viscosity evolution using high-frequency acoustic waves: Application applied for droplet evaporation. Journal of Molecular Liquids, 341, pp. 117385. [IF=6.165] [DOI=https://doi.org/10.1016/j.molliq.2021.117385].

Uddin Z., Vishwak K., Harmand S. (2021). Numerical duality of MHD stagnation point flow and heat transfer of nanofluid past a shrinking/stretching sheet: Metaheuristic approach. Chinese Journal of Physics, 73, pp. 442-461. [IF=3.237] [DOI=https://doi.org/j.cjph.2021.07.018].

Zaaroura I., Harmand S., Carlier J., Toubal M., Fasquelle A., Nongaillard B. (2021). Thermal performance of self-rewetting gold nanofluids:Application to two-phase heat transfer devices. International Journal of Heat and Mass Transfer, 174, pp. 121322. [IF=4.947] [DOI=https://doi.org/10.1016/j.ijheatmasstransfer.2021.121322].

Zaaroura I., Reda H., Lefebvre F., Carlier J., Toubal M., Harmand S., Nongaillard B., Lakiss H. (2021). Modeling and prediction of the dynamic viscosity of nanofluids by a homogenization method. Brazilian Journal of Physics, 51(issue 4), pp. 1136-1144. [IF=1.082] [DOI=https://doi.org/10.1007/s13538-021-00909-4].

Foudhil W., Chen P., Fahem K., Harmand S., Ben jabralah S. (2021). Study of the evaporation kinetics of pure and binary droplets: volatility effect. Heat and Mass Transfer, pp. 1-18. [IF=1.787] [DOI=https://doi.org/10.1007/s00231-021-03043-8].

Brik M., Harmand S., Zaaroura I., Saboni A. (2021). Experimental and numerical study for the coalescence Dynamics of vertically aligned water drops in oil. Langmuir, 37(10), pp. 3139-3147. [IF=3.557] [DOI=https://doi.org/10.1021/acs.langmuir.Oc03624].

Zaaroura I., Harmand S., Carlier J., Toubal M., Fasquelle A., Nongaillard B. (2021). Experimental studies on evaporation kinetics of gold nanofluid droplets : influence of nanoparticle sizes and coating on thermal performance. Applied Thermal Engineering, 183(Part 1), pp. 116180. [IF=4.026] [DOI=https://doi.org/10.1016/j.applthermaleng.116180].

Chen P., Harmand S., Ouenzerfi S. (2020). Immersion cooling effect of dielectric liquid and self-rewetting fluid on smooth and porous surface. Applied Thermal Engineering, 180, pp. 115862 [DOI=https://doi.org/10.1016/j.applthermaleng.2020.115862].

Khilifi D., Foudhil W., Harmand S., Ben jabralah S. (2020). Evaporation of a sessile oil drop in the Wenzel-like regime. International Journal of Thermal Sciences, 151, pp. 106236 [DOI=https://doi.org/10.1016/j.ijthermalsci.2019.106236].

Rashidi S., Karimi N., Sunden B., Mahian O., Harmand S. (2020). Passive techniques to enhance heat transfer in various thermal systems. Journal of Thermal Analysis and Calorimetry, 140, pp. 875–878 [DOI=https://doi.org/10.1007/s10973-020-09424-1].

Haidar C., Boutarfa R., Sennoune M., Harmand S. (2020). Numerical and Experimental Study of Flow and Convective Heat Transfer on a Rotor of a Discoidal Machine With Eccentric Impinging Jet. ournal of Advanced Research in Fluid Mechanics and Thermal Sciences, pp. 021012. [IF=1.27] [DOI=https://doi.org/10.1115/1.4044207].

Hassan H., Harmand S. (2020). Optimization of the Width of Vapor Chamber Regions by Using Particle Swarm Optimization Method. Journal of Heat Transfer, 142, pp. 021901 [DOI=https://doi.org/10.1115/1.4045597].

Grich N., Foudhil W., Harmand S., Ben jabralah S. (2020). Experimental Study of the Effect of Water Spray in the Air on Thermal Transfers Along a Plate of an Exchanger. Journal of Heat Transfer [DOI=https://doi.org/10.1115/1.4046348].

Grich N., Foudhil W., Harmand S., Ben jabralah S. (2020). Numerical simulation of water spray transport along a plate of a heat exchanger. Journal of Thermal Analysis and Calorimetry, pp. 1-9 [DOI=https://doi.org/10.1007/s10973-020-09356-w].

Ghrissi F., Dhifaoui B., Harmand S., Ben jabralah S. (2020). Numerical study of flow around two spheres filled by a phase-change material. Journal of Thermal Analysis and Calorimetry, 140, pp. 1193-1203 [DOI=https://doi.org/10.1007/s10973-019-09167-8].

Brik M., Harmand S., Girault M., Metz A.-L., Rochiccioli F., Lapeyre F., Clarysse J. (2020). Analytical Model for the Computation of the Drug Administration Dynamics and Inlet Pressures of an Intravenous Infusion System. American Journal of Biomedical Engineering, 10, pp. 55-63 [DOI=DOI: 10.5923/j.ajbe.20201003.01].

Dahmani H., Zaaroura I., Salhab A., Campistron P., Carlier J., Toubal M., Harmand S., Thomy V., Neyens M., Nongaillard B. (2020). Fabrication and optimization of high frequency ZnO transducers for both longitudinal and shear emission: application of viscosity measurement using ultrasound. Technology and Engineering Systems Journal, 5, pp. 1428-1435, ISSN 2415-6698

Rashidi S., Shamsabadi H., Esfahani J., Harmand S. (2019). A review on potentials of coupling PCM storage modules to heat pipes and heat pumps. Journal of Thermal Analysis and Calorimetry, pp. 1-59. [IF=2.731] [DOI=https://doi.org/10.1007/s10973-019-08930-1].

Shili H., Fahem K., Harmand S., Ben jabralah S. (2019). Thermal control of electronic components using a liquid around the phase change material. Journal of Thermal Analysis and Calorimetry, pp. 1-13 [DOI=https://doi.org/10.1007/s10973-019-08877-3].

Menni Y., Azzi A., Chamkha A., Harmand S. (2019). Effect of wall-mounted V-baffle position in a turbulent flow through a channel: Analysis of best configuration for optimal heat transfer. nternational Journal of Numerical Methods for Heat & Fluid Flow, 29 (10), pp. 3908-3937 [DOI=https://doi.org/10.1108/HFF-06-2018-0270].

Khilifi D., Foudhil W., Fahem K., Harmand S., Ben jabralah S. (2019). Study of transient condensation occurring during the starting of the evaporation of a droplet deposited on a heated substrate. Thermal Science [DOI=https://doi.org/10.2298/TSCI181122377K].

Shili H., Fahem K., Harmand S., Ben jabralah S. (2019). The effect of water's presence around the Phase Change Material. Thermal Science, 24(6), pp. 4049--4059. [IF=1.356] [DOI=https://doi.org/10.2298/TSCI180922301S].

Boubaker R., Harmand S., Ouenzerfi S. (2019). Effect of self-rewetting fluids on the liquid/vapor phase change in a porous media of two-phase heat transfer devices. International Journal of Heat and Mass Transfer, 136, pp. 655-663 [DOI=https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.016].

Menni Y., Azzi A., Chamkha A., Harmand S. (2019). Analysis of fluid dynamics and heat transfer in a rectangular duct with staggered baffles. Journal of Applied and Computational Mechanics, pp. 231-248 [DOI=10.22055/jacm.2018.26023.1305].

Haidar C., Bourtafa R., Harmand S. (2019). Fluid Flow and Convective Heat Transfer Analysis on a Rotor of Wind Turbine Alternator with an Impinging Jet.. International Journal of Renewable Energy Research-IJRER, 3, pp. 1144-1153

Chen P., Harmand S. (2019). Evaporation behavior of PEGylated graphene oxide nanofluid droplets on heated substrate. International Journal of Thermal Sciences, 135, pp. 445-458 [DOI=https://doi.org/10.1016/j.ijthermalsci.2018.06.030].

Khilifi D., Foudhil W., Fahem K., Harmand S., Ben jabralah S. (2019). Study of the phenomenon of the interaction between sessile drops during evaporation. , 23, pp. 1105-1114 [DOI=10.2298/tsci180406188k].

Korniliou S., Mackenzie-Dover C., Harmand S., Duursma G., Christy J., Terry J., Walton A., Sefiane K. (2019). Local wall temperature mapping during flow boiling in a transparent microchannel. International Journal of Thermal Sciences, 135, pp. 344-361 [DOI=https://doi.org/10.1016/j.ijthermalsci.2018.09.028].

Zaaroura I., Toubal M., Reda H., Carlier J., Harmand S., Boukherroub R., Fasquelle A., Nongaillard B. (2018). Evaporation of nanofluid sessile drops: Infrared and acoustic methods to track the dynamic deposition of copper oxide nanoparticles. International Journal of Heat and Mass Transfer, 127, pp. 1168-1177 [DOI=https://doi.org/10.1016/j.ijheatmasstransfer.2018.07.102].

Riahi A., Pelle J., Chouchene L., Harmand S., Ben jabralah S. (2018). Study of the Dynamic and Thermal Behaviors of an Air Flow in a T-Bifurcation. Journal of Heat Transfer, 140 (11) [DOI=https://doi.org/10.1115/1.4040481].

Lakehal A., Nora N.-B., Pelle J., Harmand S. (2018). On Convective Heat Transfer and Flow Dynamics Through a Straight T-Bifurcating Channel. Journal of Heat Transfer, 140, ISSN 0022-1481 [DOI=10.1115/1.4037208].

Boubaker R., Harmand S., Platel V. (2018). Experimental study of the liquid/vapor phase change in a porous media of two-phase heat transfer devices. Applied Thermal Engineering, 143, pp. 275-282 [DOI=https://doi.org/10.1016/j.applthermaleng.2018.07.058].

Ouenzerfi S., Harmand S., Schiffler J. (2018). Leidenfrost Self-Rewetting Drops. The Journal of Physical Chemistry B, 122 (18), pp. 4922-4930 [DOI=https://doi.org/10.1021/acs.jpcb.7b11944].

Parsa M., Harmand S., Sefiane K. (2018). Mechanisms of pattern formation from dried sessile drops. Advances in colloid and interface science, 254, pp. 22-47 [DOI=https://doi.org/10.1016/j.cis.2018.03.007].

Boubaker R., Harmand S., Platel V. (2018). Numerical Analysis of the Impact of Nanofluids and Vapor Grooves Design on the Performance of Capillary Evaporators. Transport in Porous Media, ISSN 1573-1634 [DOI=10.1007/s11242-018-1015-4].

Korniliou S., Mackenzie-Dover C., Christy J., Harmand S., Walton A., Sefiane K. (2018). Two-dimensional heat transfer coefficients with simultaneous flow visualisations during two-phase flow boiling in a PDMS microchannel. Applied Thermal Engineering, 130, pp. 624-636, ISSN 1359-4311 [DOI=https://doi.org/10.1016/j.applthermaleng.2017.11.003].

Hassan H., Harmand S. (2018). An experimental work on the effect of the eccentric rotation of heat sink on the convective heat transfer. International Journal of Thermal Sciences, 124, pp. 68-75, ISSN 1290-0729 [DOI=https://doi.org/10.1016/j.ijthermalsci.2017.10.011].

Menni Y., Azzi A., Harmand S. (2018). Computational fluid dynamical analysis of new obstacle design and its impact on the heat transfer enhancement in a specific type of air flow geometry. Computational Thermal Sciences: An International Journal, 421-447, pp. 10 [DOI=10.1615/ComputThermalScien.2018024416].

Parsa M., Harmand S., Sefiane K., Bigerelle M., Deltombe R. (2017). Effect of substrate temperature on pattern formation of bidispersed particles from volatile drops. The Journal of Physical Chemistry B, 121 (48), pp. 11002-11017 [DOI=https://doi.org/10.1021/acs.jpcb.7b09700].

Hassan H., Harmand S. (2017). An experimental work on the effect of the radius of rotation on the performance of revolving heat pipe (RVHP). Applied Thermal Engineering, 123, pp. 537-545, ISSN 1359-4311 [DOI=https://doi.org/10.1016/j.applthermaleng.2017.05.133].

Parsa M., Boubaker R., Harmand S., Sefiane K., Bigerelle M., Deltombe R. (2017). Patterns from dried water-butanol binary-based nanofluid drops. Journal of Nanoparticle Research, 19 (8), pp. 268, ISSN 1572-896X [DOI=10.1007/s11051-017-3951-2].

Puigdelivol O., Meresse D., Le menach Y., Harmand S., Wecxsteen J. (2017). Thermal Topology Optimization of a Three-Layer Laminated Busbar for Power Converters. IEEE Transactions on Power Electronics, 32, pp. 4691-4699, ISSN 0885-8993 [DOI=10.1109/TPEL.2016.2601010].

Chen P., Harmand S., Ouenzerfi S., Schiffler J. (2017). Marangoni Flow Induced Evaporation Enhancement on Binary Sessile Drops. The Journal of Physical Chemistry B, 121, pp. 5824-5834 [DOI=10.1021/acs.jpcb.7b02766].

Davin T., Pelle J., Harmand S., Yu R. (2017). Motor Cooling Modeling: An Inverse Method for the Identification of Convection Coefficients. Journal of Thermal Science and Engineering Applications, 9, pp. 041009--041009-13, ISSN 1948-5085 [DOI=10.1115/1.4036303].

Lakehal A., Nait bouda N., Harmand S. (2017). Numerical study of convective heat transfer in T-bifurcating channel. Heat Transfer—Asian Research, ISSN 1523-1496 [DOI=10.1002/htj.21272].

Uddin Z., Harmand S., Ahmed S. (2017). Computational modeling of heat transfer in rotating heat pipes using nanofluids: A numerical study using \{PSO\}. International Journal of Thermal Sciences, 112, pp. 44-54, ISSN 1290-0729 [DOI=https://doi.org/10.1016/j.ijthermalsci.2016.09.035].

Lancial N., Torriano F., Beaubert F., Harmand S., Rolland G. (2017). Taylor-Couette-Poiseuille flow and heat transfer in an annular channel with a slotted rotor. International Journal of Thermal Sciences, 112, pp. 92-103, ISSN 1290-0729 [DOI=https://doi.org/10.1016/j.ijthermalsci.2016.09.022].

Gharbi S., Harmand S., Ben jabralah S. (2017). Experimental study of the cooling performance of phase change material with discrete heat sources – Continuous and intermittent regimes. Applied Thermal Engineering, 111, pp. 103-111, ISSN 1359-4311 [DOI=https://doi.org/10.1016/j.applthermaleng.2016.06.109].

Boukrouche F., Moreau C., Harmand S., Beaubert F., Pelle J., Moreau O. (2017). A thermal study of power cables cooling in tunnels. Journal of Physics: Conference Series, 745 [DOI=doi:10.1088/1742-6596/745/3/032032].

Hassan H., Harmand S. (2017). Effect of Operating Parameters on the Heat Transfer and Liquid Film Thickness of Revolving Heat Pipe. Heat Transfer Engineering, 38, pp. 538-548 [DOI=10.1080/01457632.2016.1195175].

Messal O., Lambourg L., Dubas F., Harmand S. (2017). Multi-Physic Analysis of Electrical Machines: Hybrid Electro-Magneto-Aero-ThermalModeling. CEMS 2017 : 19th International Conference on Electrical Machines and Systems

Boukrouche F., Moreau C., Pelle J., Beaubert F., Harmand S., Moreau O. (2016). Mock-up Study of the Effect of Wall distance on the Thermal Rating of Power Cables in Ventilated Tunnels. IEEE Transactions on Power Delivery, 99 [DOI=10.1109/TPWRD.2016.2629285].

Terzi A., Foudhil W., Harmand S., Ben jabralah S. (2016). Liquid film evaporation inside an inclined channel: Effect of the presence of a porous layer. International Journal of Thermal Sciences, 109, pp. 136-147, ISSN 1290-0729 [DOI=http://dx.doi.org/10.1016/j.ijthermalsci.2016.05.018].

Avramenko A., Shevchuk I., Abdallah S., Blinov D., Harmand S., Tyrinov A. (2016). Symmetry analysis for film boiling of nanofluids on a vertical plate using a nonlinear approach. Journal of Molecular Liquids, 223, pp. 156-164, ISSN 0167-7322 [DOI=http://dx.doi.org/10.1016/j.molliq.2016.08.038].

Terzi A., Foudhil W., Harmand S., Ben jabralah S. (2016). Experimental investigation on the evaporation of a wet porous layer inside a vertical channel with resolution of the heat equation by inverse method. Energy Conversion and Management, 126, pp. 158-167, ISSN 0196-8904 [DOI=http://dx.doi.org/10.1016/j.enconman.2016.07.085].

Chen P., Toubal M., Carlier J., Harmand S., Nongaillard B., Bigerelle M. (2016). Evaporation of Binary Sessile Drops: Infrared and Acoustic Methods To Track Alcohol Concentration at the Interface and on the Surface. Langmuir, 32, pp. 9836-9845 [DOI=10.1021/acs.langmuir.6b02564].

Boubaker R., Platel V., Harmand S. (2016). A numerical comparative study of the effect of working fluids and wick properties on the performance of capillary pumped loop with a flat evaporator. Applied Thermal Engineering, 100, pp. 564-576, ISSN 1359-4311 [DOI=http://dx.doi.org/10.1016/j.applthermaleng.2016.02.034].

Ouenzerfi S., Harmand S. (2016). Experimental Droplet Study of Inverted Marangoni Effect of a Binary Liquid Mixture on a Nonuniform Heated Substrate. Langmuir, 32, pp. 2378-2388, ISSN 0743-7463 [DOI=10.1021/acs.langmuir.5b04539].

Meresse D., Harmand S., Grine A. (2016). Thermal diffusivity identification by 2nd derivative analysis of transient temperature profile. Journal of Thermal Analysis and Calorimetry, 124, pp. 1193-1208 [DOI=http://dx.doi.org/10.1007/s10973-016-5273-5].

Hassan H., Harmand S. (2016). Effect of rotation speed on the temperature of starter alternator machine. Heat and Mass Transfer, 52, pp. 197-204 [DOI=http://dx.doi.org/10.1007/s00231-015-1545-z].

Chen P., Toubal M., Carlier J., Harmand S., Nongaillard B., Bigerelle M. (2016). Evaporation of Binary Sessile Drops: Infrared and Acoustic Methods to Track Alcohol Concentration at the Interface and on the Surface. Langmuir, 38, pp. 9836–45. [IF=4] [DOI=10.1021/acs.langmuir.6b02564].

Jandaud P.-O., Lambourg L., Harmand S. (2016). Aero-Thermal Optimization of a Heat Sink using Variable Neighbourhood Search.. Journal of Applied Fluid Mechanics, 9, pp. 31-37

Terzi A., Ben jabralah S., Harmand S. (2016). Experimental Study of Heat and Mass Transfer for Liquid Film Evaporation along a Vertical Plate Covered With a Porous Layer.. Journal of Applied Fluid Mechanics, 9, pp. 113-120

Avramenko A., Shevchuk I., Harmand S., Tyrinov A. (2015). Thermocapillary instability in an evaporating two-dimensional thin layer film. International Journal of Heat and Mass Transfer, 91, pp. 77-88, ISSN 0017-9310 [DOI=http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015.07.063].

Zouaghi H., Harmand S., Ben jabralah S. (2015). Evaporation Experimental Study of Liquid Effluent after Methanation. International Journal of Agriculture Innovations and Research, pp. 381-389

Hassan H., Harmand S. (2015). Study of the parameters and characteristics of flat heat pipe with nanofluids subjected to periodic heat load on its performance. International Journal of Thermal Sciences, 97, pp. 126-142, ISSN 1290-0729 [DOI=http://dx.doi.org/10.1016/j.ijthermalsci.2015.06.009].

Gharbi S., Harmand S., Ben jabralah S. (2015). Experimental comparison between different configurations of PCM based heat sinks for cooling electronic components. Applied Thermal Engineering. [IF=2.624] [DOI=http://dx.doi.org/10.1016/j.applthermaleng.2015.05.024].

Hassan H., Harmand S. (2015). Effect of rotation speed on the temperature of starter alternator machine. Heat and Mass Transfer, pp. 1-8. [IF=0.929] [DOI=10.1007/s00231-015-1545-z].

Parsa M., Harmand S., Sefiane K., Bigerelle M., Deltombe R. (2015). Effect of Substrate Temperature on Pattern Formation of Nanoparticles from Volatile Drops. Langmuir. [IF=4.384]

Hassan H., Harmand S. (2015). Effect of using nanofluids on the performance of rotating heat pipe. Applied Mathematical Modelling. [IF=2.158]

Hassan H., Harmand S. (2015). An Experimental and Numerical Study on the Effects of the Flat Heat Pipe Wick Structure on Its Thermal Performance. Heat Transfer Engineering, 36, pp. 278-289. [IF=0.902]

Duursma G., Sefiane K., Dehaene A., Harmand S., Wang Y. (2014). Flow and heat transfer of single and two-phase boiling of nanofluids in microchannels. Heat Transfer Engineering. [IF=0.902]

Tran T.-H., Harmand S. (2014). Experimental investigation on heat pipe cooling for HEV/EV lithium-ion battery.. Journal of Power Sources, 265, pp. 262-272. [IF=5.257]

Bouda N., Babbou A., Harmand S. (2014). Reverse flow region associated to a heat transfer in a turbulent wall jet. International Journal of Thermal Sciences, 85, pp. 151-158. [IF=2.732]

Davin T., Pelle J., Harmand S., Yu R. (2014). Experimental study of oil cooling systems for electric motors. Applied Thermal Engineering, 75, pp. 1-13, ISSN 1359-4311. [IF=2.624]

Torriano F., Lancial N., Lévesque M., Rolland G., Hudon C., Beaubert F., Morissette J., Harmand S. (2014). Heat transfer coefficient distribution on the pole face of a hydrogenerator scale model. Applied Thermal Engineering, 70, pp. 153-162. [IF=2.624]

Grine A., Radjouh A., Harmand S. (2014). Analytical modelling using Green's functions of heat transfer in a flat solar air collector. Solar Energy, 105, pp. 760-769. [IF=3.456]

García E., Meresse D., Pombo I., Harmand S., Sánchez J. (2014). Identification of heat partition in grinding related to process parameters, using the inverse heat flux conduction model. Applied Thermal Engineering, 66(1-2), pp. 122-130, ISSN 1359-4311. [IF=2.127] [DOI=dx.doi.org/10.1016/j.applthermaleng.2014.01.048].

Wang Y., Sefiane K., Wang Z.-G., Harmand S. (2014). Analysis of two-phase pressure drop fluctuations during micro-channel flow boiling. International Journal of Heat and Mass Transfer, 70, pp. 353-362. [IF=2.315]

Tran T.-H., Harmand S., Desmet B., Filangi S. (2014). Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery. Applied Thermal Engineering, 63, pp. 551-558. [IF=2.624]

Fasquelle A., Pelle J., Harmand S., Shevchuk I. (2014). Numerical Study of Convective Heat Transfer Enhancement in a Pipe Rotating around a Parallel Axis. Journal of Heat Transfer, 136, ISSN 0022-1481. [IF=1.83]

Harmand S., Pelle J., Poncet S., Shevchuk I. (2014). Review of fluid flow and convective heat transfer within rotating disk cavities with impinging jet. International Journal of Thermal Sciences, 67, pp. 1-30, ISSN 1290-0729. [IF=2.47]

Ben rahdhia R., Harmand S., Corriou J.-P., Ben jabralah S. (2014). Liquid film evaporation enhancement in a vertical annulus with preheated air flow. Desalination and Water Treatment, 52, pp. 1654-1661. [IF=0.988] [DOI=10.1080/19443994.2013.806999].

Lancial N., Beaubert F., Harmand S., Rolland G. (2013). Effects of a turbulent wall jet on heat transfer over a non-confined backward-facing step. International Journal of Heat and Fluid Flow, 44, pp. 336-347, ISSN 0142-727X. [IF=1.581]

Poncet S., Nguyen D., Harmand S., Pelle J., Da soghe R., Bianchini C., Viazzo S. (2013). Turbulent impinging jet flow into an unshrouded rotor–stator system: Hydrodynamics and heat transfer. International Journal of Heat and Fluid Flow, 44, pp. 719-734, ISSN 0142-727X. [IF=1.581]

Nguyen D., Harmand S. (2013). Heat transfer and vortical structures around a rotating cylinder with a spanwise disk and low-velocity crossflow. International Journal of Heat and Mass Transfer, 64, pp. 1014-1030, ISSN 0017-9310. [IF=2.315]

Meresse D., Watremez M., Siroux M., Dubar L., Harmand S. (2013). Friction and wear mechanisms of phenolic-based materials on High Speed Tribometer. Journal of Tribology - Transaction of the ASME, 135(3), ISSN 0742-4787. [IF=1.521]

Tran T.-H., Harmand S., Desmet B., Pailhoux F. (2013). Thermal Characterization of LiNi0.8Co0.15Al0.05O2 Graphite Battery. Journal of The Electrochemical Society, 160, pp. 775-780, ISSN 0013-4651. [IF=2.859] [DOI=doi: 10.1149/2.044306jes].

Hassan H., Harmand S. (2013). 3D transient model of vapour chamber: effect of nanofluids on its performance. Applied Thermal Engineering, 51, pp. 1191-1201, ISSN 1359-4311. [IF=2.127]

Bornschlegell A., Pelle J., Harmand S., Fasquelle A., Corriou J.-P. (2013). Thermal Optimization of a High Power Salient-Pole Alternator. IEEE Transactions on Industrial Electronics, 60, pp. 1734-1746, ISSN 0278-0046. [IF=5.165]

Hassan H., Harmand S. (2013). A three-dimensional study of electronic component cooling using a flat heat pipe. Heat Transfer Engineering, 35, pp. 596-607, ISSN 0145-7632

Harmand S., Pérez gil D., Zouitene S., Remmerie L., Benazzouz T., Cardarelli F. (2012). Experimental study of the cooling of electrical components using water film evaporation. Advances in Mechanical Engineering. [IF=0.5]

Nguyen D., Pelle J., Harmand S., Poncet S. (2012). PIV measurements of an air jet impinging on an open rotor-stator system. Experiments in Fluids, 53, pp. 401-412. [IF=1.735]

Leriche M., Harmand S., Lippert M., Desmet B. (2012). An Experimental and Analytical Study of a Variable Conductance Heat Pipe: Application to Vehicle Thermal Management. Applied Thermal Engineering, 38, pp. 48-57, ISSN 1359-4311. [IF=2.624]

Meresse D., Harmand S., Siroux M., Watremez M., Dubar L. (2012). Experimental disc heat flux identification on a reduced scale braking system using the inverse heat conduction method. Applied Thermal Engineering, 48, pp. 202-210, ISSN 1359-4311. [IF=2.064]

Bornschlegell A., Pelle J., Harmand S., Bekrar A., Chaabane S., Trentesaux D. (2012). Thermal optimization of a single inlet T-junction. International Journal of Thermal Sciences, 53, pp. 108-118. [IF=2.563] [DOI=10.1016/j.ijthermalsci.2011.09.016].

Benselama M., Harmand S., Sefiane K. (2012). Thermocapillary effects on steadily evaporating contact line: a perturbative local analysis. Physics of Fluids, 29 (11), ISSN 119901. [IF=1.926]

Uddin Z., Kumar M., Harmand S. (2012). Influence of thermal radiation and heat generation/absorption on mhd heat transfer flow of a micropolar fluid past a wedge considering hall and ion slip currents. Thermal Science. [IF=0.779]

Wang Y., Sefiane K., Harmand S. (2012). Flow Boiling in High-Aspect Ratio mini and Micro-Channels with FC-72 and Ethanol: Experimental Results and Heat Transfer Correlation Assessments. Experimental Thermal and Fluid Science, 36, pp. 93-106, ISSN 0894-1777. [IF=2.08]

Jandaud P.-O., Harmand S., Fakes M. (2012). Thermal design of an electric motor using Particle Swarm Optimization. Journal of Physics: Conference Series, 395 [DOI=doi:10.1088/1742-6596/395/1/012030].

Benselama M., Harmand S., Sefiane K. (2011). Equilibrium profile of extended isothermal meniscus with gravity inclination effect. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 391, pp. 158-169, ISSN 0927-7757. [IF=2.354]

Ben rahdhia R., Corriou J.-P., Harmand S., Ben jabralah S. (2011). Numerical study of evaporation in a vertical annulus heated at the inner wall. International Journal of Thermal Sciences, 50, pp. 1996-2005, ISSN 1290-0729. [IF=2.563]

Harmand S., Sefiane K., Lancial N., Benselama M. (2011). Experimental Investigation of the Evaporation and Stability of a Meniscus in a Flat Microchannel. International Journal of Thermal Sciences, 1852, pp. 1845, ISSN 1290-0729. [IF=2.563]

Latour B., Bouvier P., Harmand S. (2011). Convective heat transfer on a rotating finned cylinder with transverse airflow. International Journal of Heat and Mass Transfer, 54, pp. 4710-4718, ISSN 0017-9310. [IF=2.522]

Pelle J., Harmand S. (2011). Convective Heat Transfer in a Rotor Stator System Air Gap with a Centered Natural Suction of Fluid. Journal of Heat Transfer, 133. [IF=1.83]

Kassim M., Benhamou B., Harmand S. (2011). Effect of air humidity at the entrance on heat and mass transfer in a humidifier intended for a desalination system. Applied Thermal Engineering, 31, pp. 1906-1914, ISSN 1359-4311. [IF=2.624]

Harmand S., Sonan R., Fakes M., Hassan H. (2011). Transient cooling of electronic components by Flat Heat Pipes. Applied Thermal Engineering, 31, pp. 1877-1885, ISSN 1359-4311. [IF=2.624]

Cherif A., Kassim M., Benhamou B., Harmand S., Corriou J.-P., Ben jabralah S. (2011). Experimental and numerical study of mixed convection heat and mass transfer in a vertical channel with film evaporation. International Journal of Thermal Sciences, 50, pp. 942-953, ISSN 1290-0729. [IF=2.563]

Harmand S., Sefiane K., Bennacer R., Lancial N. (2011). Experimental Investigation of the Evaporation and Stability of a Meniscus in a Flat Microchannel. Defect and Diffusion Forum, 312-315, pp. 1178-1183, ISSN 1662-9507

Pelle J., Harmand S. (2011). Convective heat transfer in a rotor stator system air gap with multiple suctions of fluid through the stator. Journal of Heat Transfer, 133. [IF=1.83]

Benselama M., Harmand S., Sefiane K. (2011). A perturbation method for solving the micro-region heat transfer problem. Physics of Fluids, 23, ISSN ISSN 1070-6631. [IF=1.926]

Fasquelle A., Le besnerais J., Harmand S., Hecquet M., Brisset M., Brochet P., Randria A. (2010). Coupled electromagnetic acoustic and thermal-flow modeling of an induction motor of railway traction. Applied Thermal Engineering, 30, pp. 2788-2795, ISSN 1359-4311. [IF=2.624]

Latour B., Bouvier P., Harmand S. (2010). Convective heat transfer on a rotating disk with transverse air crossflow. Journal of Heat Transfer, 133. [IF=1.83]

Le besnerais J., Fasquelle A., Pelle J., Lanfranchi V., Harmand S., Brochet P., Randria A. (2010). Multiphysics modelling: electro-vibro-acoustics and heat transfer of PWM-fed induction machines. IEEE Transactions on Industrial Electronics, 57, pp. 1279-1287, ISSN 0278-0046. [IF=5.16]

Le besnerais J., Hecquet M., Pelle J., Lanfranchi V., Harmand S., Brochet P., Randria A. (2010). Multiphysics modelling : electro-vibro-acoustics and heat transfer of PWM-fed induction machines. IEEE, Trans. On Industrial Electronics, 57 n° 4. [IF=5.468]

Kassim M., Benhamou B., Harmand S. (2010). Combined heat and mass transfer with phase change in a vertical channel. Computational Thermal Sciences, 2 issue 4.

Latour B., Bouvier P., Harmand S. (2010). Experimental Study of Convective Heat Transfer on a Finned Cylinder. International Journal of Thermal Sciences, ISSN ISSN 1290-0729. [IF=1.683]

Kassim M., Benhamou B., Harmand S. (2009). Effect of air humidity at the entrance on heat and mass transfers in a humidifier intended fo a desalination system. DESALINATION,. [IF=1.115]

Pelle J., Harmand S. (2009). Heat Transfer Study in a Rotor Stator System Air Gap with an Axial Inflow. Applied Thermal Engineering, 29, Issues 8-9, pp. 1532-1546 IF 1,349. [IF=1.349]

Seghir-Ouali S., Harmand S., Laloy D. (2009). Study of the thermal behavior of a synchronous motor with permanent magnets. Int. J. Engineering, 3 Issue 3, pp. 229-256

Pelle J., Harmand S. (2008). Heat Transfer Study in a Discoidal System : the Influence of Rotation and Spacing between Disks. International Journal of Heat and Mass Transfer,, 51, n° 13-14, pp. 3298-3308, ISSN 0017-9310. [IF=1.894]

Sonan R., Harmand S., Pelle J., Leger D., Fakes M. (2008). Transient thermal and hydrodynamic model of flat heat pipe for the cooling of automotive electronic components.. International Journal of Heat and Mass Transfer, Vol. 51, pp. 6006-6017, ISSN 0017-9310, IF 1,894, p. 6006-6017.. [IF=1.894]

Ducrocq P., Markiewicz é., Harmand S., De luca P., Drazetic P. (1998). Thermal Influence on Mild Steel Behaviour During a Crash Event. Int. Journal of Crashworthiness, 3, pp. 163-190

Kolski C., Escarabajal M., Harmand S. (1998). Démarche d'évaluation de systèmes d'assistance en cours magistral, basée sur une approche comparative. revue on line Hypertextes et Hypermédias, 2, pp. 1-22

Brik M., Harmand S., Girault M., Metz A.-L., Rochiccioli F., Lapeyre F., Clarysse J. (2020). Analytical Model for the computation of the drug administration dynamics and inlet pressures of an intravenous infusion system. American Journal of Biomedical Engineering, 10(3), pp. 55-63, ISBN 2163-1050 [DOI=https://doi.org/10.5923/j.ajbe.20201003.01].

Dahmani H., Zaaroura I., Salhab A., Campistron P., Carlier J., Toubal M., Harmand S., Thomy V., Neyens M., Nongaillard B. (2020). Fabrication and optimization of high frequency ZnO transducers for both longitudinal and shear emission:Application of viscosity measurement using ultrasound. Advances in Science, Technology and Engineering Systems Journal, 5(6), pp. 1428-1435 [DOI=https://doi.org/10.25046/aj0506173].

Zouaghi H., Harmand S., Ben jabralah S. (2018). Recovery of Farm Waste After Methanization by Evaporation on Inclined Plate. Exergy for A Better Environment and Improved Sustainability, 283-297, pp. 2 [DOI=https://doi.org/10.1007/978-3-319-62575-1_20].

Gharbi S., Harmand S., Ben jabralah S. (2018). Parametric Study on Thermal Performance of PCM Heat Sink Used for Electronic Cooling. Exergy for A Better Environment and Improved Sustainability, 645-660, pp. 1 [DOI=https://doi.org/10.1007/978-3-319-62572-0_17].

Jandaud P.-O., Harmand S., Fakes M. (2012). Numerical Study Of The Flow Inside An Alternator: Application To The Thermal Optimization Of The Machine. Advanced Computational Methods and Experiments in Heat Transfer XII, 75, pp. , ISBN 1743-3533 [DOI=10.2495/HT120031].

Bekir W., Messal O., Lambourg L., Dubas F., Harmand S., Kedous-Lebouc A., Gillon F. (2020). Multi-Physical Model for Sizing Optimization of Electrical Machines. Conference on Electromagnetic Field Computation, italie, novembre .

Bekir W., Messal O., Lambourg L., Dubas F., Harmand S., Kedous-Lebouc A. (2020). Loss Model Impact on Multi-Physical Coupling Designed for Sizing Optimization of Electrical Machines. 2020 Fifteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), Monaco, septembre .

Ouenzerfi S., Zahr H., Trabelsi M., Semail E., Harmand S., Boubaker R. (2019). 3-D Multi-Nodal Thermal Modelling for Fault-Tolerant Machine. 2019 IEEE International Conference on Industrial Technology (ICIT), australia, juillet .

Korniliou S., M. dover C., Walton A., Harmand S., G. karayiannis T., Sefiane K. (2018). Interfacial Heat Transfer Measurements during Flow Boiling in a PDMS Rectangular Microchannel. 6th Micro and Nano Flows Conference, USA , Atlanta, septembre .

Fasquelle A., Jandaud P.-O., Harmand S. (2018). In Situ Evaluation of Additional Losses by Thermal Analysis in a Wind Turbine Generator. 2018 XIII International Conference on Electrical Machines (ICEM), gréce, janvier .

Puigdelivol O., Le menach Y., Harmand S., Meresse D., Wecxsteen J. (2016). Multiphysics topology optimization for laminated busbars. 2016 IEEE Conference on Electromagnetic Field Computation (CEFC), Miami, novembre . [DOI=10.1109/CEFC.2016.7816294].

Boukrouche F., Moreau C., Harmand S., Beaubert F., Pelle J., Moreau O. (2016). A thermal study of power cables cooling in tunnels. 7th European Thermal-Sciences Conference, KraKow (Poland), juin .

Christy J., Sefiane K., Ebeling J., Seewald T., Harmand S. (2014). Flow measurement using micro-PIV and related temperature distributions within evaporating sessile drops of self-rewetting mixtures of 1-pentanol and water. 4th Micro and Nano Flows Conference, Londres, septembre .

Lancial N., Torriano F., Beaubert F., Harmand S., Rolland G. (2014). Study of a Taylor-Couette-Poiseuille flow in an annular channel with a slotted rotor. IEEE, Electrical Machines (ICEM), 2014 International Conference on, Berlin, pp. 1422-1429, septembre .

Pelle J., Duran medina O., Nguyen D., Harmand S. (2014). Heat Transfer in a 90° T-junction. 15th International Heat Transfer Conference, Kyoto (Japan), août .

Jandaud P.-O., Corroyer J., Harmand S., Hanafi S., Bekrar A., Bellalij M. (2014). Aero - Thermal Optimization of a Heat Sink using Particle Swarm Optimization. P. Siarry, L. Idoumghar, J. Lepagnot, International Conference on Swarm Intelligence Based Optimization (ICSIBO'2014), Mulhouse, France, pp. 1-2, mai .

García E., Sanchez J., Pombo I., Dubar L., Dubar M., Dubois A., Ortega N., Izquierdo B., Plaza S., Meresse D., Harmand S. (2014). Evaluation of friction and wear effects during the abrasive contact between Al2O3-hardened steel. MESIC5 – Manufacturing Engineering Society International Conference 2013, Zaragoza, Spain, janvier .

Giraldo N., Harmand S., Morin C., Huertas J. (2013). Experimental study of evaporating sessile liquid droplets on a heated horizontal surface. ILAAS-Europe 2013, 25th European Conference on Liquid Atomization and Spray Systems (ILASS-Europe Conference), Chania (Greece), septembre .

Poncet S., Nguyen D., Harmand S., Pelle J., Viazzo S. (2013). Transferts de chaleur et de masse par jet impactant dans un système discoïde rotor-stator. XIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes, Reims, juin .

Pelle J., Nguyen D., Harmand S. (2012). Mass and Heat Transfer Inside the Air Gap of a Discoidal and Unshrouded Rotor Stator System With a Jet Impingement. ASME 2012 Heat Transfer Summer Conference collocated with the ASME 2012 Fluids Engineering Division Summer Meeting and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, Puerto Rico (USA), pp. 79-88, juillet ., ISBN 978-0-7918-4477-9 [DOI=10.1115/HT2012-58130].

Meresse D., Watremez M., Dubar L., Siroux M., Harmand S. (2012). Modelling reinforcement debonding in braking conditions for simplified phenolic matrix material. International Conference Eurobrake 2012, FISITA, Dresden, Allemagne, avril .

Meresse D., Watremez M., Harmand S., Dubar L. (2012). Determination of heat repartition parameters on high speed pin-on-disc tribometer by inverse heat conduction method. ESAFORM 2012, 504 - 506, Key Engineering Materials, Erlangen, Allemagne, pp. 1061-1066, février ., ISBN 1662-9795

Nguyen D., Pelle J., Harmand S. (2011). PIV measurements of a jet impinging on an opened rotor-stator system at low gap spacing. APS Meeting Abstracts, novembre .

Bekrar A., Chaabane S., Trentesaux D., Bornschlegell A., Pelle J., Harmand S. (2011). Hybrid PSO-tabu search for solving non-linear constrained problem. ICSI 2011: International conference on swarm intelligence, Cergy, pp. paper #22, juin .

Meresse D., Watremez M., Siroux M., Dubar L., Harmand S. (2011). Friction and wear mechanisms study on a newly developed High Speed Tribometer. ESAFORM 2011, 1353, AIP Conference Proceedings, Belfast, Northern Ireland, pp. 1759-1764, avril ., ISBN 978-0-7354-0911-8

Meresse D., Siroux M., Watremez M., Harmand S., Dubar L. (2011). Estimation of three-dimensional distribution of heat flux on the pin frictional surface during a pin on disc test. ESAFORM 2011, 1353, AIP Conference Proceedings, Belfast, Northern Ireland, pp. 1137-1142, avril ., ISBN 978-0-7354-0911-8

Meresse D., Watremez M., Siroux M., Dubar L., Harmand S. (2010). Thermal study of pin on disc sliding contact in automotive braking conditions. JEF 2010, Lille, France, novembre .

Kassim M., Benhamou B., Harmand S., Cherif A., Ben jabralah S. (2009). Etude numérique et expérimentale sur les transferts couplés de chaleur et de masse avec changement de phase dans un canal vertical adiabatique. Congrès international franco-québequois, Lille, France, mai .

Latour B., Bouvier P., Harmand S. (2009). Echanges convectifs autour d'un arbre aileté en rotation. Congrès international franco-québequois, Lille, France, mai .

Seghir-Ouali S., Harmand S. (2009). Echanges convectif à l'intérieur d'un cylindre tournant muni d'ailettes. Congrès International JITH, Djerba, Tunisie, mars .

Grine A., Desmons J., Harmand S. (2009). Modélisation analytique des échanges convectifs fluide-parois. 3ème Congrès International Conception et Modélisation des Systèmes Mécaniques CMSM, Hammet, Tunisie, mars .

Seghir-Ouali S., Harmand S. (2009). Convective heat transfer into a rotating cylinder with longitudinal fins and an axial airflow. Congrès International, ICTEA, Abu Dhabi, janvier .

Kassim M., Cherif A., Benhamou B., Harmand S., Ben jabralah S., Belghith A. (2008). Etude numérique sur la convection mixte thermosolutable d'un écoulement d'air laminaire ascendant dans un canal vertical adiabatique. Congrès JTET2008, Bizerte, Tunisie, novembre .

Cherif A., Kassim M., Ben jabralah S., Benhamou B., Belghith A., Harmand S. (2008). Etude expérimentale sur les transferts de chaleur et de masse dans un humidificateur destine à un système de dessalement solaire. Congrès JTET2008, Bizerte, Tunisie, novembre .

Kassim M., Benhamou B., Harmand S. (2008). Mixed heat and mass convection with phase change in a vertical channel. 5th Congress of Scientific Research Outlook in the Arab World, Fez, Maroc, octobre .

Le besnerais J., Fasquelle A., Hecquet M., Pelle J., Lanfranchi V., Harmand S., Brochet P., Randria A. (2008). A fast noise-predictive Multiphysics model of the PWM-controlled asynchronous machines. International Conférence On Electrical Machines, Villamoura, Portugal, septembre .

Sonan R., Harmand S., Pelle J. (2008). Transient thermal and hydrodynamic performances of flat heat pipe subjected to heating with multiple electronic components. ASME Heat Transfer Summer Conference 2008, Jacksonville, Florida, août .

Boutarfa R., Pelle J., Harmand S. (2008). Numerical Study of Turbulent Flow and Heat Transfer in a Rotor-Stator System. ICHMT International Symposium on Advances in Computational Heat Transfer, Marrakech, mai .

Sonan R., Harmand S., Pelle J., Leger D., Fakes M. (2008). Transient thermal and hydrodynamic models of a flat heat pipe for the cooling of electronic components. ICHMT International Symposium on Advances in Computational Heat Transfer, Marrakech, Maroc, mai .

Boubaker R., Harmand S. (2017). Etude expérimentale du changement de phase liquide/vapeur dans un milieu poreux d'une boucle diphasique à pompage capillaire. CFM 2017, Lille, août .

Meresse D., Siroux M., Harmand S., Watremez M., Dubar L. (2012). Estimation de la distribution du flux thermique sur un disque par méthode inverse sur un essai frottant pion-disque. Congrès SFT 2012, Bordeaux, France, mai .

Meresse D., Siroux M., Harmand S., Watremez M., Dubar L. (2010). Etude thermique du contact glissant disque-garniture en situation de freinage automobile. Congrès SFT 2010, Le Touquet, France, mai .

Pelle J., Harmand S. (2009). Echanges convectifs locaux sur un disque tournant soumis à un jet de diamètre variable. 19ème Congrès français de Mécanique, Marseille, août .

Kassim M., Benhamou B., Harmand S. (2009). Étude numérique sur les limites du renversement d'un écoulement d'air laminaire ascendant en convection mixte thermosolutale dans un canal vertical. Congrès SFT 09, Vannes., mai .

Pelle J., Harmand S. (2009). Echanges de chaleur convectifs dans l'entrefer d'une machine discoïde soumise à un jet – Influence du diamètre du jet. Congrès SFT 2009, Vannes, France, mai .

Bouvier P., Latour B., Harmand S. (2008). Echanges convectifs autour d'un arbre aileté en rotation. Congrès SFT 08, Toulouse, juin .

Grine A., Desmons J., Harmand S. (2008). Modélisation par les fonctions de Green de l'échange convectif Fluide-Parois. Congrès SFT 2008, Toulouse, juin .

Kassim M., Benhamou B., Harmand S. (2008). Etude numérique de l'effet de la température d'entrée sur un écoulement ascendant en convection mixte thermosolutable dans un canal vertical asymétrique. Congrès SFT 2008, Toulouse, juin .

Sonan R., Harmand S., Pelle J., Leger D., Fakes M. (2008). Modèles transitoires thermiques et hydrodynamiques couplés d'un caloduc plat pour le refroidissement de plusieurs composants électroniques. Congrès SFT 2008, Toulouse, juin .

Idir N., Semaille E., Harmand S., Semaille B. (2020). Machine électrique polyphasée. , janvier .