Bruno
BENNANI

Roothaer X., Delille R., Morvan H., Bennani B., Markiewicz é., Fontaine C. (2018). A three-dimensional geometric quantification of human cortical canals using an innovative method with micro-computed tomographic data. Micron, 114, pp. 62-71 [DOI=10.1016/j.micron.2018.07.006].

Treutenaere S., Lauro F., Bennani B., Matsumoto T., Mottola E. (2017). Modelling of the intralaminar matrix damage with friction effects of fabric reinforced polymers. Composites Part B: Engineering, 111, pp. 60-73. [IF=3.85] [DOI=http://dx.doi.org/10.1016/j.compositesb.2016.12.019].

Treutenaere S., Lauro F., Bennani B., Haugou G., Matsumoto T., Mottola E. (2017). Constitutive modelling of the strain-rate dependency of fabric reinforced polymers. International Journal of Impact Engineering, 108, pp. 361-369. [IF=2.646] [DOI=10.1016/j.ijimpeng.2017.04.010].

Notta-Cuvier D., Lauro F., Bennani B., Nciri M. (2016). Impact of natural variability of flax fibres properties on mechanical behaviour of short-flax-fibre-reinforced polypropylene. Journal of Materials Science, 51(6), pp. 2911-2925, ISSN 0022-2461. [IF=2.371] [DOI=10.1007/s10853-015-9599-3].

Notta-Cuvier D., Lauro F., Bennani B. (2015). Modelling of progressive fibre/matrix debonding in short-fibre reinforced composites up to failure. International Journal of Solids and Structures, 66, pp. 140-150, ISSN 0020-7683. [IF=2.035] [DOI=10.1016/j.ijsolstr.2015.03.034].

Morin D., Haugou G., Lauro F., Bennani B., Bourel B. (2015). Elasto-viscoplasticity Behaviour of a Structural Adhesive Under Compression Loadings at Low, Moderate and High Strain Rates. Journal of Dynamic Behavior of Materials, 1, pp. 124-135, ISSN 2199-7446 [DOI=10.1007/s40870-015-0010-x].

Balieu R., Lauro F., Bennani B., Haugou G., Chaari F., Matsumoto T., Mottola E. (2015). Damage at high strain rates in semi-crystalline polymers. International Journal of Impact Engineering, 76, pp. 1-8, ISSN 0734-743X. [IF=2.01] [DOI=10.1016/j.ijimpeng.2014.08.013].

Joudon V., Portemont G., Lauro F., Bennani B. (2014). Experimental procedure to characterize the mode I dynamic fracture toughness of advanced epoxy resins. Engineering Fracture Mechanics, 126, pp. 166–177, ISSN 0013-7944. [IF=1.413] [DOI=10.1016/j.engfracmech.2014.05.010].

Notta-Cuvier D., Odent J., Delille R., Murariu M., Lauro F., Raquez J.-M., Bennani B., Dubois P. (2014). Tailoring polylactide (PLA) properties for automotive applications: Effect of addition of designed additives on main mechanical properties. Polymer Testing, 36, pp. 1-9, ISSN 0142-9418. [IF=1.646]

Balieu R., Lauro F., Bennani B., Matsumoto T., Mottola E. (2014). Non-associated viscoplasticity coupled with an integral-type nonlocal damage model for mineral filled semi-crystalline polymers. Computers and Structures, 134, pp. 18-31, ISSN 0045-7949. [IF=1.509]

Notta-Cuvier D., Lauro F., Bennani B. (2014). An original approach for mechanical modelling of short-fibre reinforced composites with complex distributions of fibre orientation. Composites: Part A, 62, pp. 60-66, ISSN 1359-835X. [IF=2.744]

Notta-Cuvier D., Lauro F., Bennani B., Balieu R. (2014). Damage of short-fibre reinforced materials with anisotropy induced by complex fibres orientations. Mechanics of Materials, 68, pp. 193-206, ISSN 0167-6636. [IF=1.936]

Notta-Cuvier D., Lauro F., Bennani B., Balieu R. (2013). An efficient modelling of inelastic composites with misaligned short fibres. International Journal of Solids and Structures, 50(19), pp. 2857-2871, ISSN 0020-7683. [IF=1.871]

Delille R., Bennani B., Lesueur D., Drazetic P., Fontaine C., Morvan H. (2013). Experimental protocol to characterise damage of appendicular bone. Computer Methods in Biomechanics and Biomedical Engineering, 16(S1), pp. 284-286, ISSN 1025-5842. [IF=1.393]

Balieu R., Lauro F., Bennani B., Delille R., Matsumoto T., Mottola E. (2013). A fully coupled elastoviscoplastic damage model at finite strains for mineral filled semi-crystalline polymer. International Journal of Plasticity, 51, pp. 241-270, ISSN 0749-6419. [IF=4.356]

Morin D., Bourel B., Bennani B., Lauro F., Lesueur D. (2013). A new cohesive element for structural bonding modelling under dynamic loading. International Journal of Impact Engineering, 53, pp. 94-105, ISSN 0734-743X. [IF=1.681]

Bry R., Bennani B., Delille R., Morvan H., Hault-Dubrulle A., Fontaine C. (2012). Mechanical characterisation under cycling loading of humerus cortical bone. Computer Methods in Biomechanics and Biomedical Engineering, 15(S1), pp. 274-276, ISSN 1025-5842. [IF=1.393]

Morin D., Haugou G., Bennani B., Lauro F. (2011). Experimental characterization of a toughened epoxy adhesive under a large range of strain rates. Journal of Adhesion Science and Technology, 25(13), pp. 1581–1602, ISSN 0169-4243. [IF=0.948]

Epee A., Lauro F., Bennani B., Bourel B. (2011). Constitutive model for a semi-crystalline polymer under dynamic loading. International Journal of Solids and Structures, 48(10), pp. 1590-1599, ISSN 0020-7683. [IF=1.857]

Morin D., Haugou G., Bennani B., Lauro F. (2010). Identification of a new failure criterion for toughened epoxy adhesive. Engineering fracture mechanics, 77(17), pp. 3481-3500, ISSN 0013-7944. [IF=1.571]

Lauro F., Bennani B., Morin D., Epee A. (2010). The SEE method for determination of behavior laws for strain rate dependent material: application to polymer material. International Journal of Impact Engineering, 37(6), pp. 715-722, ISSN 0734-743X. [IF=1.522]

Bennani B., Lauro F. (2006). Damage models and identification procedures for crashworthiness of automotive light materials. Latin American Journal of Solids and Structures, 3(1), pp. 75-87, ISSN 1679-7817

Zouari B., Lauro F., Bennani B., Markiewicz é., Even D., Cornette D. (2006). Efficiency and identification procedures of damage models in dynamic. International Journal of Crashworthiness, 11(6), pp. 583-592, ISSN 1358-8265

Croix P., Lauro F., Bennani B. (2004). Anisotropic damage for crashworthiness of vehicles. International Journal of Crashworthiness, 9, pp. 299-309

Croix P., Lauro F., Bennani B., Oudin J. (2003). Damage and rupture of anisotropic metals for the dynamic and the crash of vehicles. Journal de Physique IV, 110, pp. 675-680

Lauro F., Bennani B., Croix P., Oudin J. (2001). Identification of the damage parameters for anisotropic materials by inverse technique: application to an aluminium. Journal of Materials Processing Technology, 118, pp. 472-477

Lauro F., Bennani B., Oudin J., Ni X. (1998). Damage occurrence under dynamic loading for anisotropic strain rate sensitive materials. Shock and Vibration, 5, pp. 43-51

Lauro F., Bennani B., Drazetic P., Oudin J. (1997). Damage occurrence under dynamic loading for strain rate sensitive materials. Communications in Numerical Methods in Engineering, 13, pp. 113-126

Lauro F., Bennani B., Drazetic P., Oudin J. (1997). Ductile damage and fracture finite element modelling of elasto-viscoplastic voided materials. Computational Materials Science, 7, pp. 295-307

Bennani B., Bay N. (1996). Limits of lubrication in backward can extrusion: analysis by the finite-element method , & physical modelling experiments. Journal of Materials Processing Technology, 61, pp. 275-286

Bennani B., Oudin J. (1995). Backward can extrusion of steels : effects of punch design on flow mode , & void volume fraction. Int. J. Mach Tools Manufact, 35, pp. 903-911

Oudin J., Bennani B., Picart P. (1995). Constitutive models for microvoid nucleation, growth , & coalescence in elastoplasticity finite element reference modelling. Materials Processing Defects, Studies in Applied Mechanics 43, 1, pp. 107-122

Morin D., Haugou G., Lauro F., Bennani B. (2011). Elasto-viscoplasticity behaviour of a structural adhesive under compression loadings. Dynamic behavior of materials, 1, T. Proulx (Eds.), pp. 369-377 [DOI=10.1007/978-4419-8228-5_55].

Croix P., Bennani B., Lauro F., Markiewicz é. (2005). Crashworthiness of automotive light materials: magnesium, aluminium and high strength steel. Impact Loading of Lightweight Structures. , M. Alves and N. Jones (Eds), pp. , ISBN 1-84564-159-0.

Gonthier J., Gillet C., Leteneur S., Delille R., Bennani B., Simoneau é. (2023). Does the limitation of the first metatarsal-phalangeal joint impact vertical jump performance?. European College of Sport Science ECSS 2023, juillet .

Poulet T., Bracq A., Demarty Y., Respaud P., Beugels J., Bahlouli N., Bennani B., Lauro F. (2022). Characterisation and modelling of the in-plane mechanical behaviour of two UHMWPE composites over a wide range of strain rates. Light-Weight Armour for Defense LWAG 2022, Freiburg (Allemagne), septembre .

Dorleans V., Delille R., Lauro F., Notta-Cuvier D., Bourel B., Haugou G., Bennani B., Morvan H., Michau E. (2019). A viscoelastic-viscoplastic time temperature equivalence for thermoplastics. 12th European LS-DYNA Conference, Koblenz (Germany), mai .

Dorleans V., Lauro F., Delille R., Treutenaere S., Notta-Cuvier D., Bennani B., Haugou G., Bourel B., Michau E., Thoby J.-D. (2018). Time temperature equivalence for a mineral filled polymer for automotive applications. 12th International DYMAT Conference, Arcachon (France), septembre .

Roothaer X., Delille R., Morvan H., Bennani B., Markiewicz é., Fontaine C. (2018). Quantitative method for the three-dimensional assessment of human cortical long-bone architecture based on µ-CT images. CMBBE 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Lisbon (Portugal), janvier .

Treutenaere S., Lauro F., Bennani B., Haugou G., Xu W., Mottola E., Matsumoto T. (2017). Numerical evaluation of low speed impact behaviour of a fabric layered composite plate in an industrial context. 11th European LS-DYNA Users Conference, Salzburg, Austria, mai .

Treutenaere S., Lauro F., Bennani B., Xu W., Matsumoto T., Mottola E. (2016). Numerical and experimental evaluation of the damage induced by a low-speed impact on a composite plate in an industrial context. ICILSM, Torino, Italia, mai .

Lauro F., Balieu R., Bennani B., Haugou G., Bourel B., Chaari F., Matsumoto T., Mottola E. (2015). Damage characterization for particles filled semi-crystalline polymer. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401009].

Treutenaere S., Lauro F., Bennani B., Matsumoto T., Mottola E. (2015). Finite strain formulation of viscoelastic damage model for simulation of fabric reinforced polymers under dynamic loading. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159404011].

Treutenaere S., Lauro F., Bennani B., Matsumoto T., Mottola E. (2015). Material model of layered fabric composites with delamination prediction for impact simulations using standard Reissner-Mindlin shell formulation. ICCM20, 20th International Conference on Composite Materials, Copenhagen, Denmark, juillet .

Treutenaere S., Lauro F., Bennani B., Matsumoto T., Mottola E. (2015). Strain rate dependant damage material model of layered fabric composites with delamination prediction for impact simulations. 10th European LS-DYNA Users Conference, Wurzburg, Germany, juin .

Lauro F., Balieu R., Bennani B., Haugou G., Matsumoto T., Mottola E. (2014). Experimental behaviour, damage and failure of a filled semi-crystalline polymer on a large strain rate range. ICEM16, 16th International Conference on Experimental Mechanics, Cambridge, England, juillet .

Notta-Cuvier D., Lauro F., Bennani B. (2014). Anisotropic damage induced by complex fibre orientations in short-fibre reinforced composites. ICILLS International Conference on Impact Loading of Lightweight Structures, Cape Town, South Africa, janvier .

Joudon V., Portemont G., Lauro F., Bennani B. (2014). Experimental procedure to characterize the mode I dynamic fracture toughness of epoxy resins. ICILLS International Conference on Impact Loading of Lightweight Structures, Cape Town, South Africa, janvier .

Delille R., Bennani B., Lesueur D., Drazetic P., Fontaine C., Morvan H. (2013). Experimental protocol to characterize damage for appendicular bone. Congrès SB 2013, Marseille, septembre .

Balieu R., Lauro F., Bennani B., Matsumoto T., Mottola E. (2013). Time and rate dependent constitutive model coupled with nonlocal damage at finite strains for semi-crystalline polymers. 9th European LS-DYNA Users Conference, Manchester, England, juin .

Bry R., Bennani B., Delille C., Morvan H., Hault-Dubrulle A., Fontaine C. (2012). Mechanical characterization under cycling loading of humerus cortical bone. Congrès SB 2012, Toulouse, octobre .

Haugou G., Bourel B., Lauro F., Bennani B., Lesueur D., Morin D. (2012). Characterization and modelling of structural bonding at high strain rate. 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, DYMAT, Freibourg, Allemagne, septembre ., ISBN 978-2-7598-0757-4

Balieu R., Lauro F., Bennani B., Bourel B., Nakaya K. (2012). Polymer behaviour and fracture models in dynamic. 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, DYMAT, Freibourg, Germany, septembre ., ISBN 978-2-7598-0757-4

Balieu R., Lauro F., Bennani B., Nakaya K. (2012). An elasto-viscoplastic with damage constitutive model for semi-crystalline polymer. Plasticity 2012, San Juan, PR, USA, janvier .

Balieu R., Lauro F., Bennani B., Bourel B., Nakaya K., Haran E. (2011). Rate dependent model for polymer materials, application to crashworthinesssimulation. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Balieu R., Lauro F., Bennani B., Bourel B., Nakaya K., Haran E. (2011). Polymer fracture criteria in dynamic. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Balieu R., Lauro F., Bennani B., Bourel B., Nakaya K., Haran E. (2011). Behaviour model for semi-cristalline polymer, application to crashworthiness simulations. 8th European LS-DYNA Users Conference, Strasbourg, France, mai .

Lauro F., Morin D., Bourel B., Bennani B., Haugou G. (2011). A New Cohesive Element for Structural Bonding Modeling in Crash Applications. 34th Annual Meeting of The Adhesion Society, Savannah, USA, février .

Lauro F., Bennani B., Epee A. (2010). Behaviour and rupture models for polypropylene in dynamic. DYMAT Technical Meeting, Strasbourg, France, décembre .

Balieu R., Bourel B., Bennani B., Lauro F., Nakaya K., Haran E. (2010). Polymer behavior models for crashworthiness finite element simulations. Student DYMAT conference, Guéthary, France, octobre .

Morin D., Haugou G., Bennani B., Lauro F. (2010). Characterization of a structural adhesive by Digital Image Correlation. Proceedings of the SEM Annual Conference, Society for Experimental Mechanics Inc., Indianapolis, USA, juin ., ISBN 978-1-935116-05-9

Morin D., Haugou G., Lauro F., Bennani B. (2010). Elasto-viscoplasticity Behavior of a Structural Adhesive Under Compression Loadings. Proceedings of the SEM Annual Conference & Exposition on Experimental and Applied Mechanics "Experimental Mechanics of High Performance Systems", Society for Experimental Mechanics Inc., Indianapolis, USA, juin ., ISBN 978-1-935116-05-9

Morin D., Bourel B., Lauro F., Bennani B. (2010). Structural bonding modeling for crash simulations. IV European Conference on Computational Mechanics ECCM2010, Paris, France, mai .

Morin D., Haugou G., Bennani B., Lauro F. (2010). Identification of new behaviour and failure models for toughened epoxy adhesive. 33rd Annual meeting of adhesion society, Daytona Beach, USA, février ., ISBN 1086-9506

Lauro F., Morin D., Haugou G., Bennani B. (2009). Application of SEE method on multiphase steel. SEM Annual Conference, Albuquerque, Nouveau Mexique, USA, juin .

Epee A., Lauro F., Bennani B. (2009). A phenomenological approach for the modelling of a semi-cristalline polymer under dynamic loading until failure. Workshop : Behaviour and modelling of polymers, Trondheim, Norway, juin .

Epee A., Morin D., Bennani B., Lauro F. (2008). Characterisation of material behaviour of a semi-cristalline polymer on a wide range of plastic strain rates. International Conference - Impact Loading of Lightweight Structures, Trondheim, Norway, juin .

Zouari B., Lauro F., Bennani B., Markiewicz é., Even D., Cornette D. (2006). Efficiency and identification procedures of damage models in dynamic. International Crashworthiness conference, Athens, Greece, juillet .

Lauro F., Bayart A.-S., Bennani B., Langrand B. (2005). A global approach to the failure prediction of a riveted assembly. VIII International Conference on Computational Plasticity, COMPLAS, D.R.J. Owen, E. Onate and B. Suarez (Ed.), Barcelona, Spain, septembre ., ISBN 84-95999-78-1

Lauro F., Bennani B., Markiewicz é., Langrand B. (2005). Improvement of crashworthiness modelling with history of forming and assembly processes. International Conference on Impact Loading of Lightweight Structures, Florianopolis, Brazil, mai .

Croix P., Bennani B., Lauro F., Benallal A. (2004). Models and identification method for damage under dynamic loading: Application to aluminium and magnesium parts. International Symposium Crashworthiness of Light-Weight Automotive Structures, Trondheim (Norway), juin .

Tison S., Croix P., Bennani B., Lauro F. (2003). Modelling of damage and failure in aluminium alloys. International Crashworthiness and Design Symposium, G.R.R.T., Lille (France), pp. 1061-1074, décembre .

Croix P., Lauro F., Bennani B., Oudin J. (2003). Damage and rupture of anisotropic metals for the dynamic and the crash of vehicles. DYMAT, 7th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, J.S. Cirne, Porto (Portugal), pp. 13-18, septembre .

Tison S., Croix P., Bennani B., Lauro F., Benallal A. (2003). Modelling and identification of damage for crash simulations. VII International Conference on Computational Plasticity, D.R.J. Owen, E. Onate and B. Suarez, Barcelona (Spain), pp. 76, avril ., ISBN 84-95999-22-6

Lauro F., Bennani B., Oudin J. (1998). Identification of the damage parameters for anisotropic materials by inverse technique : application to an aluminium. M.S.J. Hashmi & L. Looney, Proceedings of the International Conference on Advances in Materials and Processing Technologies and 16th Annual Conference of the Irish Manufacturing Committee, Dublin City University Press, Dublin, pp. 1001-1008, janvier .

Lauro F., Barrière T., Bennani B., Drazetic P., Oudin J. (1997). Damage framework for the prediction of material defects : identification of the damage material parameters by inverse technique. M. Predeleanu, P. Gilormini, Advanced methods in materials processing defects, M. Predeleanu, P. Gilormini, Amsterdam, pp. 165-174, janvier .

Bay N., Wanheim T., Arentoft M., Andersen C., Bennani B. (1995). An appraisal of numerical , & physical modelling for prediction of metal forming processes. Complas 95, 4 th International Conference on Computational Plasticity, Barcelone, SP, avril .

Treutenaere S., Lauro F., Bennani B., Xu W., Mottola E., Matsumoto T. (2017). ). Détermination expérimentale et numérique de l'endommagement induit par un impact basse vitesse sur un stratifié CMO à préformes textiles dans un contexte industriel. 20ièmes Journées Nationales des Composites, Champs sur Marne, France, juin .

Treutenaere S., Lauro F., Bennani B., Matsumoto T., Mottola E. (2015). Modélisation du comportement des composites stratifiés à préformes textiles avec prédiction du délaminage par une théorie de déplacement zigzag dans des éléments coques Mindlin-Reissner. 19èmes Journées Nationales sur les Composites, Lyon, France, juin .

Notta-Cuvier D., Odent J., Delille R., Murariu M., Lauro F., Raquez J.-M., Bennani B. (2014). Développement de compositions polymères biosourcées sur base PLA pour des applications automobiles. Matériaux 2014, Montpellier, novembre .

Treutenaere S., Lauro F., Bennani B., Matsumoto T., Mottola E. (2014). Modèle viscoélastique endommageable en grandes déformations pour les composites carbone/époxy à préformes textiles soumis à des sollicitations dynamiques. Matériaux 2014, Montpellier, novembre .

Bourel B., Haugou G., Lauro F., Deltombe R., Lesueur D., Bennani B. (2013). Modélisation et caractérisation des joints collés à hautes vitesses de déformation. J. Chroné, J.-D Guérin et P. Quaegebeur, MATEC Web of Conferences Proceedings - Journées Annuelles SF2M 2013, 7, edp sciences, Lille, pp. 02014, octobre ., ISBN 978-2-7598-1080-2 [DOI=10.1051/matecconf/20130702014].

Balieu R., Lauro F., Bennani B., Matsumoto T., Mottola E. (2013). Modèle viscoélastique-viscoplastique couplé avec endommagement non-local pour polymères semi-cristallins. Actes du 11ème colloque national en calcul des structures, Giens, mai .

Notta-Cuvier D., Lauro F., Bennani B., Balieu R. (2013). Modélisation du comportement inélastique avec endommagement de composites renforcés par des fibres courtes non parfaitement orientées. Actes du 11ème colloque national en calcul des structures, Giens, mai .

Joudon V., Portemont G., Lauro F., Bennani B. (2013). Protocoles expérimentaux pour la caractérisation de la décohésion dynamique des Composites à Matrice Organique. MECADYMAT, Brest, France, avril .

Balieu R., Lauro F., Bennani B., Bourel B. (2011). Modèles de comportement pour matériaux polymères soumis au crash. Actes du 10ème colloque national en calcul des structures, Giens, mai .

Mahelle P., Markiewicz é., Fabis J., Bennani B., Langrand B. (2005). Caractérisations expérimentales d'assemblages soudés par points soumis à des solicitations dynamiques. 17ème Congrès Français de Mécanique, Troyes, septembre .

Lauro F., Bennani B., Oudin J. (1998). Identification de lois de comportement pour matériaux poreux par méthode inverse. Mémoires et Études Scientifiques SF2M Journées d'Automne, ENSAM, Paris, pp. 180-193, janvier .

Lauro F., Bennani B., Oudin J. (1998). Identification des paramètres microscopiques d'endommagement par une méthode inverse. Colloque National MECAMAT Mécanismes et Mécanique de l'Endommagement et de la Rupture, Aussois, France, janvier .

Lauro F., Bennani B., Epee A., Morin D., Balieu R. (2011). Identification d'un critère de rupture pour des matériaux viscoplastiques. Journées du CCRS (Comité Consultatif sur les Recherches en Soudage), Valenciennes, France, mars .

Epee A., Lauro F., Bennani B. (2010). Caractérisation et modélisation du comportement d'un polymère semi-cristallin au crash. Journées Scientifiques : Fiabilité des structures à base polymères, biopolymères et écopolymères, Metz, France, mai .

Epee A., Bennani B., Morin D., Lauro F. (2007). Caractérisation des déformations élastiques et plastiques d'un polymère semi-cristallin par corrélation d'images à différentes vitesses. DEPOS21, DEformation des POlymères Solides, Lille, France, octobre .

Croix P., Lauro F., Bennani B. (2004). Caractérisation de l'acier THR800 sous sollicitations dynamique pour l'analyse numérique de la rupture. Groupe de Travail MECADYMAT, Metz (France), juin .

Tison S., Croix P., Bennani B., Lauro F. (2003). Damage models for crashworthiness of lightweight vehicles. EUROPAM, Mainz (Germany), octobre .

Anceau J.-H., Bennani B., Coutellier D., Lesueur D., Delille R. (2011). Caractérisation mécanique des composites assemblés par rivetage. Projet ITRANS ULTIMAT, LAMIH, Valenciennes, mai .

Anceau J.-H., Bennani B., Montbrizon M., Coutellier D., Lesueur D., Delille R. (2011). Caractérisation mécanique des composites assemblés par collage. Projet ITRANS ULTIMAT, LAMIH, Valenciennes, avril .

Balieu R., Lauro F., Bennani B., Bourel B., Haugou G. (2010). Polymer behaviour and fracture modelling for crashworthiness (TOYOTA). , LAMIH, Valenciennes, septembre .

Bourel B., Morin D., Lauro F., Bennani B., Haugou G. (2010). Modélisation des assemblages collés par éléments cohésifs. Rapport de contrat L&L products, LAMIH, Valenciennes, septembre .

Balieu R., Lauro F., Bennani B., Bourel B., Haugou G. (2010). Numerical implementation and experimental results (TOYOTA). , LAMIH, Valenciennes, juin .

Balieu R., Lauro F., Bennani B., Bourel B., Haugou G. (2010). Damage and failure models for polymers (TOYOTA). , LAMIH, Valenciennes, février .

Anceau J.-H., Bennani B., Coutellier D., Delille R., Lesueur D. (2009). Caractérisation de composite carbone-époxyde en quasi-statique. Projet ITRANS ULTIMAT, UVHC, LAMIH, Valenciennes, juin .

Anceau J.-H., Bennani B., Coutellier D., Delille R., Lesueur D. (2008). Caractérisation de composite verre-époxyde en quasi-statique. Projet ITRANS ULTIMAT, UVHC, LAMIH, Valenciennes, juin .

Bennani B., Cornette D., Croix P., Deletombe é., Fabis J., Haugou G., Lauro F., Markiewicz é. (2005). Rupture en pleine tôle de l'acier THR800 sous sollicitations dynamiques à moyennes vitesses de déformation (ARCELOR). , LAMIH, Valenciennes, juillet .

Lauro F., Bennani B. (2005). Implémentation d'un modèle de comportement de matériaux polymères (VISTEON). , LAMIH, Valenciennes, juillet .

Epee A., Lauro F., Bennani B. (2005). Implémentation d'un modèle de comportement de matériaux polymères. , VISTEON, Valenciennes, juillet .

Markiewicz é., Bennani B., Lauro F., Croix P., Haugou G. (2004). Campagne d'essais sur aciers à très hautes résistances - Etude du comportement à l'endommagement d'éprouvette plates entaillées. Rapport ARCELOR, lamih, valenciennes, janvier .

Bennani B., Cornette D., Croix P., Deletombe é., Fabis J., Haugou G., Lauro F., Markiewicz é. (2004). Rupture en pleine tôle de l'acier THR800 sous sollicitations dynamiques à moyennes vitesses de déformation. Rapport ARCELOR, lamih, valenciennes, janvier .

Benallal A., Bennani B., Lauro F. (2003). Mesh dependency in crash problems : Part I : theory. Rapport intermédiaire de contrat CEE BRITE EURAM IMPACT, Impact Improved Failure Prediction for Advanced Crashworthiness of Transportation Vehicles, Université de Valenciennes et du Hainaut-Cambrésis, Valenciennes, septembre .

Benallal A., Bennani B., Lauro F. (2003). Mesh dependency in crash problems : Part II : A viscoplastic model. Rapport intermédiaire de contrat CEE BRITE EURAM IMPACT, Impact Improved Failure Prediction for Advanced Crashworthiness of Transportation Vehicles, Université de Valenciennes et du Hainaut-Cambrésis, Valenciennes, septembre .

Maillot S., Bennani B., Lauro F., Markiewicz é. (2003). Amélioration de la simulation du comportement en service des structures en acier: Prédiction de la rupture lors d'un crash. Rapport ARCELOR, lamih, valenciennes, janvier .

Benallal A., Bennani B., Lauro F. (2002). Damage parameters results. Rapport intermédiaire de contrat CEE BRITE EURAM IMPACT, Improved Failure Prediction for Advanced Crashworthiness of Transportation Vehicles, Université de Valenciennes et du Hainaut-Cambrésis, Valenciennes, décembre .

Benallal A., Bennani B., Lauro F. (2002). Identification of damage parameters : experimental results. Rapport intermédiaire de contrat CEE BRITE EURAM IMPACT, Improved Failure Prediction for Advanced Crashworthiness of Transportation Vehicles, Université de Valenciennes et du Hainaut-Cambrésis, Valenciennes, avril .

Bennani B., Benallal A., Lauro F., Tison S. (2002). Periodic progress report on micro-model 1. Report Brite Euram IMPACT, LAMIH et LMT Cachan, Valenciennes, janvier .

Bennani B., Benallal A., Lauro F., Tison S. (2002). Periodic progress report on micro-model 2. Report, Brite Euram IMPACT, LAMIH et LMT Cachan, Valenciennes, janvier .

Benallal A., Bennani B., Lauro F. (2001). Identification of damage parameters : methods. Rapport intermédiaire de contrat CEE BRITE EURAM IMPACT, Improved Failure Prediction for Advanced Crashworthiness of Transportation Vehicles, Université de Valenciennes et du Hainaut-Cambrésis, Valenciennes, juillet .

Bennani B., Benallal A., Lauro F., Tison S. (2001). Periodic progress report on micro-model. Report, Brite Euram IMPACT, LAMIH et LMT Cachan, Valenciennes, janvier .

Benallal A., Bennani B., Lauro F. (2000). Mesh independant damage models for ductile fracture. Research report, CEE Brite Euram Impact Improved Failure Prediction, UVHC, LAMIH, Valenciennes, janvier .

Oudin J., Bennani B. (1999). Endommagement, simulations et méthodes inverses. Rapport de recherche FEDER, Université, LAMIH, Valenciennes, janvier .

Bennani B., Oudin J. (1998). Rotary forging, inovative development. CEE Inco Copernicus Rotary Cold Forging, Université, LAMIH, Valenciennes, janvier .

Bennani B., Oudin J. (1997). Rotary forging, finite element modelling. CEE Inco Copernicus Rotary Cold Forging, Université, LAMIH, Valenciennes, janvier .