Raphael
DELTOMBE

Lemesle J., Moreau C., Deltombe R., Martin J., Blateyron F., Bigerelle M., Brown C. (2023). Height Fluctuations and Surface Gradients in Topographic Measurements. Materials, 16, pp. 5408 [DOI=https://doi.org/10.3390/ma16155408].

Bigerelle M., Guibert R., Mironova A., Robache F., Deltombe R., Nys L., Brown C. (2023). Fractal and statistical characterization of brushstroke on paintings. Surface Topography: Metrology and Properties, 11. [IF=2.185] [DOI=10.1088/2051-672X/acbe53].

Lemesle J., Moreau C., Deltombe R., Blateyron F., Martin J., Bigerelle M., Brown C. (2023). Top-down determination of fluctuations in Topographic measurements. Materials, 16(2), pp. 473 [DOI=https://doi.org/10.3390/ma16020473].

Borel A., Deltombe R., Moreau P., Ingicco T., Bigerelle M., Marteau J. (2022). Optimization of use-wear detection and characterization on stone tool surfaces. Scientific Reports, ISSN 2045-2322. [IF=5.13]

Borel A., Deltombe R., Marteau J., Moreau P., Bigerelle M., Lengyel G., Mester Z. (2021). Qualitative and quantitative analyses of surface alterations of stone tools made of raw materials from the carpathian basin. Hungarian Archaeology, 10 Issue 3, pp. 1-11 [DOI=https://doi.org/10.36338/ha.2021.3.4].

Mironova A., Robache F., Deltombe R., Guibert R., Nys L., Bigerelle M. (2020). Digital cultural heritage preservation in art painting:a surface roughness approach to the brush strokes. Sensors, 20(21), pp. 6269. [IF=3.275]

Marteau J., Deltombe R., Bigerelle M. (2020). Quantification of the Morphological Signature of Roping Based on Multiscale Analysis and Autocorrelation Function Description. Materials, 13 (13), pp. 3040. [IF=3.1]

Garabedian C., Vayron R., Bricout N., Deltombe R., Anselme K., Bigerelle M. (2020). In vivo damage study of different textured breast implants. Biotribology. [IF=1.92] [DOI=10.1016/j.biotri.2020.100133].

Brigaud I., Garabedian C., Bricout N., Pieuchot L., Ponche A., Deltombe R., Delille R., Altan M., Bigerelle M., Anselme K. (2020). Surface Texturization of Breast Implants Impacts Extracellular Matrix and Inflammatory Gene Expression in Asymptomatic Capsules. Plastic and Reconstructive Surgery, 145, Issue 3, pp. 542-551. [IF=4.2] [DOI=10.1097/PRS.0000000000006606].

Guibert R., Hanafi S., Deltombe R., Bigerelle M., Brown C. (2020). Comparison of three multiscale methods for topographic analyses. Surface Topography: Metrology and Properties, 8, Number 2. [IF=3.1]

Parsa M., Harmand S., Sefiane K., Bigerelle M., Deltombe R. (2017). Effect of substrate temperature on pattern formation of bidispersed particles from volatile drops. The Journal of Physical Chemistry B, 121 (48), pp. 11002-11017 [DOI=https://doi.org/10.1021/acs.jpcb.7b09700].

Parsa M., Boubaker R., Harmand S., Sefiane K., Bigerelle M., Deltombe R. (2017). Patterns from dried water-butanol binary-based nanofluid drops. Journal of Nanoparticle Research, 19 (8), pp. 268, ISSN 1572-896X [DOI=10.1007/s11051-017-3951-2].

Garabedian C., Delille R., Deltombe R., Anselme K., Atlan M., Bigerelle M. (2017). A multi-topographical-instrument analysis: the breast implant texture measurement. Surface Topography: Metrology and Properties, 5(2). [IF=2.4] [DOI=025004].

Bataille C., Deltombe R., Jourani A., Bigerelle M. (2017). Joint properties of a tool machining process to guarantee fluid-proof abilities. Surface Topography: Metrology and Properties, 5 (4)

Bataille C., Luc é., Bigerelle M., Deltombe R., Dubar M. (2016). Rolls Wear Characterization in Hot Rolling Process. Tribology International, 100, pp. 328-337. [IF=2.26] [DOI=10.1016/j.triboint.2016.03.012].

Parsa M., Harmand S., Sefiane K., Bigerelle M., Deltombe R. (2015). Effect of Substrate Temperature on Pattern Formation of Nanoparticles from Volatile Drops. Langmuir. [IF=4.384]

Luc é., Bigerelle M., Deltombe R., Dubar M. (2015). The representative topography of worn hot rolling mill cylinders. Tribology International, 82, pp. 387–399. [IF=2.1]

Hubert C., Marteau J., Deltombe R., Chen Y., Bigerelle M. (2014). Roughness characterization of the galling of metals. Surface Topography: Metrology and Properties, 2, pp. 034002, ISSN 2051-672X [DOI=http://dx.doi.org/10.1088/2051-672X/2/3/034002].

Deltombe R., Kubiak K., Bigerelle M. (2014). How to select the most relevant 3D roughness parameters of a surface. Scanning, 36-1, pp. 150-160. [IF=1.1]

Deltombe R., Belotserkovets A., Dubar M., Dubois A., Dubar L. (2011). Local approach strategy to predict final roughness in cold rolling of stainless steel strip. Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 225(9), pp. 887-893, ISSN 1350-6501. [IF=0.733]

Louaisil K., Dubar M., Deltombe R., Dubois A., Dubar L. (2009). Analysis of interface temperature, forward slip and lubricant influence on friction and wear in cold rolling. Wear, 266, pp. 119-128, ISSN 0043-1648. [IF=1.48]

Szczurek E., Dubar M., Deltombe R., Dubois A., Dubar L. (2009). New approach to the evaluation of the free surface position in roll coating. Journal of Materials Processing Technology, 209, pp. 3187-3197, ISSN 0924-0136. [IF=1.42]

Belotserkovets A., Deltombe R., Dubar M., Dubar L., Dubois A., Vandekinderen H., Damasse J. (2009). Roughness prediction during cold rolling of stainless steel strip: fluid structure approach. International Journal of Material Forming, 2, pp. 21-24, ISSN 1960-6206

Belotserkovets A., Dubois A., Dubar M., Dubar L., Deltombe R., Vandekinderen H., Damasse J. (2008). 2D asperity deformation of stainless steel strip in cold rolling. International Journal of Material Forming, 1, pp. 351-354, ISSN 1960-6206

Louaisil K., Dubar M., Deltombe R., Dubois A., Dubar L. (2008). Simulation of interface temperature and control of lubrication in the study of friction and wear in cold rolling. International Journal of Material Forming, 1, pp. 1239-1242, ISSN 1960-6206

Daouben E., Dubois A., Dubar M., Dubar L., Deltombe R., Truong dinh N., Lazzarotto L. (2008). Effects of lubricant and lubrication parameters on friction during hot steel forging. International Journal of Material Forming, 1, pp. 1223-1226, ISSN 1960-6206

Szczurek E., Dubar M., Deltombe R., Dubois A., Dubar L. (2007). Towards the mastering of the free surface position in roll coating. key engineering materials, 344, pp. 955-962, ISSN 1013-9826

Dubar M., Huart S., Deltombe R., Dubois A., Dubar L. (2006). Cold rolling of galvanized strips: A new approach to the evaluation of zinc fines formation. Journal of Materials Processing Technology, 177, pp. 505-508, ISSN 0924-0136

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). Asperity deformation, lubricant trapping and iron fines formation mechanism in cold rolling processes. wear, 257, pp. 471-480, ISSN 0043-1648

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). A methodology to identify behaviour of galvanised coating: an application to the skin passed steel strip. Steel Grips, 2, pp. 521-525

Deltombe R., Dubar M., Dubois A., Dubar L. (2003). A New Methodology To Analyse Iron Fines During Steel Cold Rolling Processes. Wear, 254, pp. 211-221, ISSN 0043-1648

Depuiset B., Deltombe R., Dubar L., Viellard L., Laisne G., Freudenreich P., Braganca P. (2003). Méthodologie d'optimisation de la lubrification et de la propreté de bande sur laminoir réversible. Revue de Métallurgie, pp. 174-175

Deltombe R., Moraux D., Plessis G., Level P. (2000). Forced response of structural dynamic systems with local time dependent stiffnesses. Journal of Sound and Vibration, 237, pp. 761-773, ISSN 0022-460X

Borel A., Mester Z., Deltombe R., Moreau P., Bigerelle M., Ingicco T. (2021). The application of metrological and elementary analyses of surfaces in the study of prehistoric stone tools. 3ème Forum franco-hongrois de la recherche scientifique, Institut Français de Budapest, hongrie, octobre .

Borel A., Marteau J., Deltombe R., Moreau P., Lengyel G., Mester Z. (2021). WEAR 2.0_Hungary. Qualitative and quantitative analyses of surface alterations of stone tools: digital and physical reference collection for the characterization of manufacture, use and natural/accidental traces on stone raw materials from Hungary. 62ème conférence de la société Hugo Obermaier, République tchéque, avril .

Borel A., Lengyel G., Deltombe R., Moreau P., Marteau J., Bigerelle M., Mester Z. (2019). Qualitative and quantitative analyses of surface al terations of stone tools: manufacture and use traces on stone raw materials from Hungary. 2nd Forum Franco-hongrois de la recherche scientifique, Budapest (Hongrie), septembre .

Hubert C., Deltombe R., Bigerelle M., Chen Y. (2014). Roughness characterization of the seizure of metals. ICSM 2014 - 4th International Conference on Surface Metrology, Hamburg, Germany, mars .

Hubert C., Bay N., Christiansen P., Deltombe R., Dubar L., Dubar M., Dubois A. (2011). Numerical simulation of lubrication mechanisms at mesoscopic scale. ESAFORM 2011, 1353, AIP Conference Proceedings, Belfast, Northern Ireland, pp. 1729-1734, avril ., ISBN 978-0-7354-0911-8

Deltombe R., Dubar M., Dubois A., Dubar L. (2010). Toward Oxide Scale Behavior Management At High Temperature. Francisco Chinesta, Laboratoire de Mecanique des Systemes et Procedes Yvan Chastel, Center for Material Forming-CEMEF Mohamed El Mansori, Mechanical Engineering and Manufacturing Research Group, AMPT, 1315, AIP Conference Proceedings, Paris, F, pp. 793-798, octobre ., ISBN 978-0-7354-0871-5

Vandekinderen H., Dubar L., Deltombe R., Damasse J. (2010). Back-calculation of friction during cold rolling of stainless steels and its influence on surface quality. Eric FELDER, Pierre MONTMITONNET, Tribology of Manufacturing Processes: Proceedings of the 4th International Conference on Tribology in Manufacturing Processes, 2, presse des mines, Nice (France), pp. 769-779, juin ., ISBN 978-2911256-27-1

Deltombe R., Belotserkovets A., Dubar M., Dubois A., Dubar L. (2010). Local approach strategy to the roughness prediction of stainless steel strip. Eric FELDER, Pierre MONTMITONNET, Tribology of Manufacturing Processes: Proceedings of the 4th International Conference on Tribology in Manufacturing Processes, 2, Presse des mines, Nice (France), pp. 809-819, juin ., ISBN 978-2-911256-27-1

Belotserkovets A., Deltombe R., Dubar M., Dubar L., Dubois A., Vandekinderen H., Damasse J. (2009). ROUGHNESS PREDICTION DURING COLD ROLLING OF STAINLESS STEEL STRIP: FLUID STRUCTURE APPROACH. ESAFORM 2009, P. Boisse, Twente, avril .

Louaisil K., Dubar M., Deltombe R., Dubois A., Dubar L. (2008). Role of the different lubricant constituents on friction and wear in cold rolling. Metal forming, 2, M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, J. Lin, K. Mori, Cracovie, pp. 94-101, septembre ., ISBN 978-3-514-00754-3

Belotserkovets A., Dubois A., Dubar M., Dubar L., Deltombe R., Vandekinderen H., Damasse J. (2008). 2D asperity deformation of stainless steel strip in cold rolling. P. Boisse, ESAFORM 2008, Lyon, pp. 13-16, avril .

Louaisil K., Dubar M., Dubois A., Deltombe R., Dubar L. (2008). Simulation of interface temperature and control of lubrication in the study of friction and wear in cold rolling. P. Boisse, ESAFORM 2008, Lyon, pp. 29-32, avril .

Daouben E., Dubois A., Dubar M., Dubar L., Deltombe R., Truong dinh N., Lazzarotto L. (2008). Effects of lubricant and lubrication parameters on friction during hot steel forging. P. Boisse, ESAFORM 2008, pp. 13-16, avril .

Brocail J., Watremez M., Deltombe R., Dubar L. (2007). Analyse des conditions de contact et de frottement à l'interface outil/copeau en usinage grande vitesse. HSIMP, Senlis, France, novembre ., ISBN 978-2-85400-812-X

Szczurek E., Dubar M., Deltombe R., Dubois A., Dubar L. (2007). Towards the mastering of the free surface position in roll coating. In F. Micari, M. Geiger, J. Duflou, B. Shirvani, R. Clarke, R. Di Lorenzo, L. Fratini, Sheet metal 2007, Palermo, pp. 955-962, avril ., ISBN 0-87849-437-5

Daouben E., Dubar L., Dubar M., Deltombe R., Dubois A., Truong dinh N., Lazzarotto L. (2007). Friction and wear in hot forging of steels. E. Cueto, F. Chinesta, ESAFORM 2007, Zaragoza, pp. 527-534, avril ., ISBN 978-0-7354-0414-4

Dubar M., Huart S., Deltombe R., Dubois A., Dubar L. (2006). Cold rolling of galvanized strips: a new approach to the evaluation of zinc fines formation. P. Hartley, J. Majta, M. Pietrzyk, J. Lin, M. Jolly, 11th International Conference on METAL FORMING, Birmingham, pp. 505-508, septembre .

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2006). Mastering of surface aspect: application to cold rolling of galvanized strips. N. Juster, A. Rosochowski, 9th International Conference on Material Forming – ESAFORM 2006, Glasgow, pp. 275-278, avril ., ISBN 83-89541-68-8

Dubar M., Huart S., Deltombe R., Dubois A., Dubar L. (2006). Predictive formation of zinc fines during the cold rolling of galvanized strips. N. Juster, A. Rosochowski, 9th International Conference on Material Forming – ESAFORM 2006, Glasgow, pp. 151-154, avril ., ISBN 83-89541-68-8

Dubar M., Dubois A., Deltombe R., Dubar L. (2005). Simulation of bulk forming processes: influence of reliable material data near the contact zone on computational accuracy. D.R.J. Owen, E. Onate, B. Suarez, Computational plasticity COMPLAS VIII, 1, CIMNE, Barcelone (Espagne), pp. 404-407, septembre ., ISBN 84-95999-78-1

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). A methodology to identify behaviour of galvanised coating: an application to the skin passed steel strip. 10th International Conference Metal Forming 2004, J. Kusiak, P. Hartley, J. Majta, I. Pillinger, M. Pietrzyk, Krakow (Poland), pp. 521-525, septembre ., ISBN 3-937057-08-0

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). Skin-pass of galvanised strips: mastering of contact conditions to optimise the process. ICTMP 2004, N. Bay, Nyborg (Denmark), pp. 747-754, juin ., ISBN 87-91035-12-0

Huart S., Dubar M., Deltombe R., Dubois A., Dubar L. (2004). Galvanised coating bulk behaviour: An application to the skin-passed strip. 4th International Conference of THE Coatings,, K.D. Bouzakis, B. Denkena, M. Geiger, H.K. Toenshoff, Fr. W. Bach and U. Popp, Erlangen (Germany), pp. 365-374, avril .

Deltombe R., Huart S., Dubar M., Dubar L. (2004). From Iron fines pollution to wrenching phenomena. 7th ESAFORM 2004, S. Storen, Trondheim Norway), pp. 253-256, janvier ., ISBN 82-92499-02-04

Deltombe R., Morgado N., Dubar M., Dubois A., Dubar L. (2004). Hot Forming of aluminium: a new methodology to identify friction parameters. 7th ESAFORM 2004, S. Storen, Trondheim, (Norway), pp. 253-256, janvier .

Deltombe R., Szczurek E., Dubois A., Dubar L. (2004). ). From schemes optimization to roll fatigue phenomena: global cold rolling mill enhancements. 7th ESAFORM 2004, S Storen, Trondheim (Norway), pp. 249-252, janvier ., ISBN 87-91035-12-0

Dubois A., Deltombe R., Dubar M., Dubar L. (2004). Warm drawing simulation of 6060 T6 aluminium: a new way to identify friction parameters. ICTMP 2004, N. Bay, Nyborg (Denmark), pp. 569-575, janvier ., ISBN 87-91035-12-0

Depuiset B., Deltombe R., Dubar L., Viellard L., Laisne G., Freudenreich P., Braganca P. (2003). Méthodologie d'optimisation de la lubrification et de la propreté de bande sur laminoir réversible. International Steel Making Conference, La Revue de Métallurgie, Paris (France), pp. 174-175, décembre .

Deltombe R., Dubar M., Dubois A., Dubar L. (2003). New investigation on cold rolled strip cleanliness. U.P. Singh, M. Geiger, H.J.J. Kals, B. Shirvani, Sheet Metal 2003, Louvain (belgique), pp. 156-166, janvier ., ISBN 1-85923-171-3

Deltombe R., Dubar M., Dubois A., Dubar L. (2002). Iron fines mechanism during steel cold rolling process: strip cleanliness improvements. Euromech 435 colloquium, Simulation of Friction and Wear in Metal Forming, Valenciennes, France, juin .

Dubois A., Deltombe R., Viellard L., Dubar L., Oudin J. (2001). Selection criteria for oil in water emulsion used in cluster type rolling processes. J.R., M. Geiger, H.J.J. Kaals, B. Shirvani, U.P. Singh, Sheet Metal 2001, Duflou Eds, Leuven, pp. 1412-1418, avril .

Deltombe R., Dubois A., Dubar L., Oudin J., Viellard L., Naylor J.-P. (2001). Optimisation of a cluster type mill lubricated by oil water emulsion. ICIT 2001, Third International Conference on Industrial Tools, K. Kuzman, Rogaska slatina (Slovenia), pp. 83-86, avril ., ISBN 961-90401-5-5

Deltombe R., Dubois A., Oudin J., Viellard L., Naylor J.-P. (2001). Optimisation of a cluster type mill lubricated by oil water emulsion. K. Kuzman, Third International Conference on Industrial Tools ICIT 2001, Rogaska Stalina: Tecos Rozvojni center orodjarstva, pp. 83-86, janvier .

Coustenoble L., Kim J., Deltombe R., Massa F., Tison T. (2017). Caractérisation morphologique de l'usure des freins. 23ème Congrès Français de Mécanique, Lille, France, août .

Coustenoble L., Kim J., Deltombe R., Massa F., Tison T. (2017). Caractérisation morphologique multi-échelle de l'usure de plaquettes de frein automobile. 29ème Journées Internationales Francophones de Tribologie, Saint Ouen, France, mai .

Bourel B., Haugou G., Lauro F., Deltombe R., Lesueur D., Bennani B. (2013). Modélisation et caractérisation des joints collés à hautes vitesses de déformation. J. Chroné, J.-D Guérin et P. Quaegebeur, MATEC Web of Conferences Proceedings - Journées Annuelles SF2M 2013, 7, edp sciences, Lille, pp. 02014, octobre ., ISBN 978-2-7598-1080-2 [DOI=10.1051/matecconf/20130702014].

Deltombe R., Dubar M., Dubar L., Luc é. (2010). Vers une maîtrise du comportement à la déformation des oxydes à haute température. Journées internationales francophones 2010, 1, Presse des Mines, Albi, France, pp. 389-394, mai ., ISBN 978-235671-033-8

Coustenoble L., Kim J., Deltombe R., Massa F., Tison T. (2017). Caractérisation morphologique de l'usure des freins. Mardi des Chercheurs, Mons, Belgique, mars .

Dubois A., Dubar M., Dubar L., Deltombe R. (2008). Caractérisation tribologique des procédés de mise en forme. Colloque SF2M section Nord, Saint Omer, janvier .

Brocail J., Watremez M., Deltombe R., Dubar L. (2007). Identification of friction variables at the toll-chip interface for high speed machining. Constitutive Relations and Numerical Simulation of Industrial Dynamic Processes, Metz, novembre .

Guérin J.-D., Garçon T., Deltombe R., Dubois A. (2012). Corrélation métallurgie/comportement thermomécaniques d'acier spéciaux pour la construction automobile. Rapport final de la convention VL_110902 PSA/Valutec/TEMPO, Laboratoire TEMPo, Université De Valenciennes Et Du Hainaut Cambrésis, juillet .

Dubois A., Deltombe R. (2010). Détermination des propriétés élastiques de l'acier P110 en traction et en compression à 250 C. Rapport final de la convention N° VL_100531, Vallourec/Valutec/TEMPO, Laboratoire TEMPo, Université De Valenciennes Et Du Hainaut Cambrésis, juillet .

Deltombe R., Daouben E., Dubar L., Dubois A., Dubar M. (2008). Etude de l'usure des outillages en forge à chaud mise place d'une plateforme expérimentale de pulvérisation des outillages, essais de frottement à chaud. Rapport de contrat CETIM LAMIH - VALUTEC, LAMIH - VALUTEC, Valenciennes, janvier .

Szczurek E., Dubar L., Dubois A., Dubar M., Deltombe R. (2007). Analyse du cordage en coil coating. Rapport de contrat Myriad - Groupe CORUS, Université de Valenciennes et du Hainaut Cambrésis, Valenciennes, mai .

Deltombe R., Daouben E., Dubar L., Dubois A., Dubar M. (2005). Etude de l'usure des outillages en forge à chaud. Rapport de contrat CETIM LAMIH, LAMIH, Valenciennes, décembre .

Huart S., Dubar L., Dubois A., Dubar M., Deltombe R. (2005). Analyse du Skin Pass des tôles galvanisées. Rapport de contrat Myriad - Groupe CORUS, LAMIH, Valenciennes, mai .

Morgado N., Dubar L., Dubois A., Dubar M., Deltombe R., Oudin J. (2003). Rapport final de contrat CETIM-LAMIH. Réalisation d'un banc d'essai en vue de la caractérisation du frottement et de la lubrification en forge à chaud, LAMIH, Valenciennes, septembre .

Deltombe R., Dubar L., Dubar M., Dubois A. (2003). Rapport de contrat ASCOMETAL-CREAS-LAMIH. Identification de coefficients de frottement en mise en forme à froid lors d'un procédé multi passes, LAMIH, Valenciennes, juin .

Dubois A., Dubar L., Dubar M., Deltombe R. (2002). Identification de coefficients de frottement en mise en forme à froid lors d'un procédé multi passes. Rapport de contrat ASCOMETAL-CREAS, Université, LAMIH, Valenciennes, janvier .

Deltombe R. (2001). De la lubrification à la pollution : une contribution à l'étude du laminage à froid. , Univ. Valenciennes Et Du Hainaut-Cambrésis, janvier .